Shell Tellus S2 M 46
Line: Tellus
General-purpose anti-wear hydraulic oil from Shell's Tellus range, widely used in industrial and mobile hydraulic systems.
Shell is a major international lubricant brand producing a full range of industrial and automotive oils. KARALUB supplies and distributes Shell products in the Iranian market alongside its own engineered range, giving customers one technical source for both.
SH
Shell is an independent, well-established brand in the lubricants industry with a multi-decade track record — one of the international and Iranian brands KARALUB supplies and supports with local technical expertise.
Product Catalog
This section is for product presentation and comparison only — it is not an online store. See each product's verified KARALUB equivalent where one exists, or contact our technical team.
Line: Tellus
General-purpose anti-wear hydraulic oil from Shell's Tellus range, widely used in industrial and mobile hydraulic systems.
Line: Tellus
A higher-viscosity grade from the same Tellus range, for hydraulic systems running at higher operating temperatures or heavier load.
Line: Omala
Industrial gear oil from Shell's Omala range, commonly used in enclosed industrial gearboxes under moderate to heavy load.
Line: Omala
A synthetic industrial gear oil from the Omala range, positioned for gearboxes under heavy load or a wide temperature range.
Line: Corena
Reciprocating compressor oil from Shell's Corena range, commonly used in industrial air compressors.
Line: Turbo
Turbine oil from Shell's Turbo range, positioned for steam and gas turbine systems.
Line: Morlina
Circulating oil from Shell's Morlina range, positioned for bearings and industrial circulating systems.
Line: Spirax
Multi-purpose transmission fluid from Shell's Spirax range, commonly used in agricultural machinery and off-highway equipment.
Line: Thermia
Heat transfer fluid from Shell's Thermia range, positioned for closed-loop industrial heating systems.
Line: Refrigeration Oil
Refrigeration compressor oil from Shell, positioned for industrial and commercial cooling systems.
Line: Rimula
A mineral heavy-duty diesel engine oil from Shell's Rimula range, positioned for older-technology diesel engines.
Line: Rimula
A multi-purpose heavy-duty diesel engine oil from Shell's Rimula range, commonly used across heavy-duty fleets under varying driving conditions.
Line: Rimula
A fully synthetic diesel engine oil from Shell's Rimula range, positioned for extended drain intervals in Euro 4/5 engines without a particulate filter.
Line: Rimula
A low-ash, low-emission diesel engine oil from Shell's Rimula range, engineered for engines fitted with a diesel particulate filter (DPF).
Line: Helix
A fully synthetic passenger-car engine oil from Shell's Helix range, built on Shell's PurePlus gas-to-liquid base oil technology, for modern gasoline and diesel engines.
Line: Helix
A fully synthetic engine oil from Shell's Helix range, positioned as a value-oriented alternative to Ultra for everyday driving.
Line: Helix
A semi-synthetic engine oil from Shell's Helix range, suited to a wide variety of modern vehicles.
Line: Helix
A mineral multigrade engine oil from Shell's Helix range, positioned for everyday driving under normal conditions.
Line: Argina
A marine trunk-piston engine oil from Shell's Argina range, positioned for medium-speed marine diesel engines running on heavy fuel oil.
Line: Gadinia
A marine trunk-piston engine oil from Shell's Gadinia range, positioned for marine diesel engines running on distillate fuel.
Line: Mysella
A gas-engine oil from Shell's Mysella range, positioned for stationary and marine gas-fuelled generator engines.
Line: Diala
A mineral electrical insulating oil from Shell's Diala range, offering good dielectric properties for transformers.
Line: Diala
A GTL-based electrical insulating oil from Shell's Diala range, positioned for the latest generation of transformers requiring higher performance.
Line: Diala
A readily biodegradable electrical insulating oil from Shell's Diala range, positioned for transformers in environmentally sensitive locations.
Line: Naturelle
A biodegradable, ester-based fluid from Shell's Naturelle range, positioned for marine stern tube bearings and approved by major stern tube and seal manufacturers.
Line: Gadus
Multi-purpose grease from Shell's Gadus range, commonly used in general-purpose industrial bearings.
Line: Gadus
A softer consistency from the same Gadus V220 range, suited to centralized lubrication systems.
Line: Gadus
A higher-performance grease from the Gadus S3 range, positioned for bearings under heavier load or higher speed.
Line: Gadus
A high-temperature grease from the Gadus S3 range, positioned for points near industrial heat sources.
Line: Gadus
An advanced synthetic grease from the Gadus S5 range, positioned for demanding conditions and a wide temperature range.
Line: Gadus
A very high-temperature-resistant grease from the Gadus S5 range, positioned for high-heat industrial applications such as hot lines.
Line: Gadus
A rail-industry-specific grease from Shell, positioned for wheel flange and rail contact points.
Line: Gadus
An open-gear grease from Shell, positioned for large open gears such as those in mills and rotary kilns.
Line: Gadus
Another variant from the Gadus S2 range with a lighter base oil, positioned for higher-speed bearings.
Line: Retinax
A lithium-complex grease from Shell's older Retinax range, still recognized in some markets.
Line: Alexia
A low-BN (25) marine cylinder oil from Shell's Alexia range (previously known as Alexia S3), formulated for two-stroke marine diesel engines running on very low-sulphur fuel (up to 0.1%), within Emission Control Areas, or on liquefied natural gas.
Line: Alexia
A mid-BN (40) marine cylinder oil from Shell's Alexia range, introduced fresh in the post-IMO 2020 portfolio with no prior product name, positioned for two-stroke engines running on 0.1% or 0.5% sulphur fuel.
Line: Alexia
The predecessor name for the product Shell now markets as "Alexia 70" \u2014 a BN 70 cylinder oil for low-speed crosshead marine diesel engines burning residual fuel with sulphur content up to 4.0% weight. This name is still in circulation among some distributors.
Line: Alexia
A BN 70 cylinder oil from Shell's Alexia range (previously known as Alexia 50), for low-speed two-stroke marine diesel engines burning heavy fuel oil with sulphur content up to 3.5%, including use alongside exhaust gas scrubbers.
Line: Alexia
A high-BN (100) cylinder oil from Shell's Alexia range (previously known as Alexia S6), designed to offer enhanced protection in low-speed two-stroke engines burning high-sulphur fuel oil or fitted with a scrubber.
Line: Alexia
The highest-BN product in Shell's Alexia portfolio (140), at SAE 60 viscosity, for two-stroke marine diesel engines burning high-sulphur heavy fuel oil with a scrubber, where the greatest degree of acid neutralisation is required.
Line: Alexia
A special BN 40 cylinder oil designed for improved piston running conditions in low-speed crosshead engines burning low-sulphur fuel (below 2% weight); its reduced ash level helped avoid excessive piston top-land deposits. This product has since been replaced by Shell Alexia S4.
Line: Alexia
The predecessor name for the product now marketed as "Shell Alexia 25" \u2014 a BN 25 cylinder oil, among the first Shell developed specifically for distillate or very-low-sulphur (below 0.1%) fuel use within Emission Control Areas.
Line: Alexia
An all-purpose cylinder oil from Shell's Alexia range at BN 60, designed to cover a wide span of operating conditions, distillate and residual fuels up to 3.5% sulphur, and environments from polar to tropical with a single product. It replaces both Shell Alexia 50 and Shell Alexia LS, removing the need to carry two separate products.
Line: Alexia
A BN 80 cylinder oil introduced in 2013 using Triple-Action Technology for maximum protection against cold corrosion under low-load conditions such as slow-steaming. According to distributor information, this product has since been removed from Shell's current portfolio and can be replaced by either Alexia 50 or Alexia S6 \u2014 please confirm current availability with Shell or KARALUB.
Line: Alexia
The predecessor name for the product now marketed as "Shell Alexia 100" \u2014 a Triple-Action Technology cylinder oil for engines burning residual fuel with sulphur above 1.0%, operating under severe oil stress such as slow or flexible steaming regimes.
Line: Gadinia
The predecessor name for the product now marketed as "Shell Gadinia S3 40" — a marine trunk-piston engine oil for medium-speed marine diesel engines running on distillate fuel. This name is still in circulation among some distributors.
Line: Gadinia
A multifunctional marine trunk-piston engine oil from Shell's Gadinia S3 range at SAE 30, for main propulsion and auxiliary medium-speed marine diesel engines burning distillate or bio-fuels with up to 1% sulphur; also optimised for non-engine applications such as gearboxes and clutches, and for deck machinery requiring an SAE 30 oil.
Line: Gadinia
An advanced lubricant from Shell's Gadinia AL range at SAE 30, for medium-speed trunk-piston marine diesel engines running on distillate fuel; specially designed to control oil consumption in modern engines where liner lacquering is a potential problem, and suitable for use in certain gears and ancillary equipment.
Line: Gadinia
An advanced lubricant from Shell's Gadinia AL range at SAE 40, for medium-speed trunk-piston marine diesel engines running on distillate fuel. Being multifunctional, it can also be used for other shipboard applications such as reduction gears.
Line: Diala
An electrical insulating oil from Shell's older Diala range, meeting ANSI/ASTM D 3487 Type I, for transformers and electrical equipment requiring standard oxidation resistance.
Line: Diala
The predecessor name for the product now marketed as “Shell Diala S2 ZX-A” — a high-performance electrical insulating oil meeting ASTM Type II (greater oxidation resistance than Type I), for applications requiring rapid heat transmission and high oxidation stability.
Line: Diala
A non-inhibited electrical insulating oil from Shell's Diala range, manufactured from naphthenic mineral feedstocks with natural low pour point characteristics; for standard oxidation resistance in transformers and electrical equipment.
Line: Diala
An inhibited electrical insulating oil from Shell's Diala range, manufactured from naphthenic feedstocks with excellent low-temperature properties achieved without pour point depressants; PCB-free and suited to grid and industrial transformers up to maximum load.
Line: Diala
A high-performance, non-inhibited electrical insulating oil from Shell's Diala range, made from refined naphthenic feedstock; offering high oxidation stability, good dielectric properties, and good low-temperature performance without additives.
Line: Diala
A mineral insulating oil from Shell’s Diala range, positioned for electrical equipment requiring stable dielectric performance and good oxidation resistance; exact specification values vary by the specific inhibition level and grade — refer to Shell or KARALUB for a batch certificate of analysis.
Line: Diala
An uninhibited electrical insulating oil from Shell's Diala range, formulated from highly refined mineral oils; offering good dielectric properties, good oxidation stability and efficient heat transfer even at low temperatures.
Line: Diala
A premium inhibited electrical insulating oil from Shell's Diala range, manufactured from specially refined mineral oils with an ultra-low sulphur content; offering very high oxidation stability and excellent dielectric and low-temperature properties, with proper heat transfer even from very low starting temperatures (an “Arctic grade”).
Line: Gadus
A light brown, lithium/calcium soap-based semi-fluid special-purpose grease from Shell, developed specifically for the lubrication of pneumatic rockdrills operated under harsh mining conditions.
Line: Gadus
An entry-tier multipurpose grease from Shell's Gadus S1 range at A150 base-oil viscosity, NLGI 2, for general-purpose lubrication of rolling element and plain bearings.
Line: Gadus
An entry-tier multipurpose grease from Shell's Gadus S1 range at A320 base-oil viscosity, in the stiffer NLGI 3 consistency, for bearings requiring a firmer consistency for better retention in position.
Line: Gadus
A lithium-based multipurpose grease from Shell's Gadus S1 range at V100 base-oil viscosity, NLGI 2, for general-purpose lubrication of rolling element and plain bearings, hinges and sliding surfaces.
Line: Gadus
A European-market grade of Shell's lithium-based Gadus S1 V100 multipurpose grease, at the intermediate NLGI 2.5 consistency between the standard 2 and 3 grades.
Line: Gadus
A lithium-based multipurpose grease from Shell's Gadus S1 range at V100 base-oil viscosity, in the stiffer NLGI 3 consistency, for bearings requiring a firmer grease consistency.
Line: Gadus
A multi-purpose extreme-pressure grease with solids from Shell's Gadus S1 range, offering good mechanical and oxidation stability; protects bearing surfaces under extreme pressure with anti-rust and water-resistance qualities.
Line: Gadus
A lithium-based multipurpose grease from Shell's Gadus S1 range at V160 base-oil viscosity, NLGI 2, for general-purpose bearing lubrication across a −20°C to 120°C operating range.
Line: Gadus
A lithium-based multipurpose grease from Shell's Gadus S1 range at V160 base-oil viscosity, in the stiffer NLGI 3 consistency, for bearings requiring a firmer grease consistency.
Line: Gadus
A lithium 12-hydroxystearate soap-based grease from Shell containing 1% molybdenum disulfide and a special polymer; developed jointly with Mack and Ford for heavy-duty, severe-service applications in trucks and other automotive equipment.
Line: Gadus
A lithium-based multipurpose grease from Shell's Gadus S1 range at V220 base-oil viscosity, in the softer NLGI 1 consistency, for bearings and centralised lubrication systems needing a softer, more pumpable grease.
Line: Gadus
A lithium-based multipurpose grease from Shell's Gadus S1 range at V220 base-oil viscosity, NLGI 2, for general-purpose lubrication of loaded bearings across a −20°C to 120°C operating range.
Line: Gadus
A smooth-textured calcium-based grease from Shell’s Gadus S2 range (previous name: Shell Rhodina Grease EP(LF)), for propeller shaft and plain bearings, cranes, winches, ropes and open gears operating in wet environments; the calcium soap structure provides very high resistance to water wash-off. Operating range −10°C to 80°C, short-term up to 100°C.
Line: Gadus
A specialty grease from Shell’s Gadus S2 range with a lithium soap/polymer thickener, offering superior resistance to oil separation under the high centrifugal forces found in couplings; shows little to no separation in the ASTM D 4425 High Speed Centrifugal Test (over 36,000G at 15,000 rpm). Suitable for all types of grease-lubricated couplings including geared, chain and steel grid types.
Line: Gadus
An open gear lubricant from Shell’s Gadus S2 OG range, lead- and solvent-free, for the lubrication and protection of open gears and wire ropes subjected to extremes of ambient temperature and operating conditions; a blend of paraffinic mineral and synthetic base oils with carefully selected additives.
Line: Gadus
An open gear lubricant from Shell’s Gadus S2 OG range whose balanced formulation stays soft and pliable over long periods, eliminating build-up in the roots of the gear teeth; molybdenum disulphide and other solid lubricants reduce tooth contact zone temperatures and help alleviate stick-slip conditions.
Line: Gadus
An open gear lubricant from Shell’s Gadus S2 OG range, for large open gears (girth, bull) and pinions under heavy load; excellent anti-wear protection and resistance to water wash-off.
Line: Gadus
A high-viscosity open gear lubricant from Shell’s Gadus S2 OG range, formulated for heavy-duty applications where extreme pressure and shock loads are encountered; designed to provide superior protection to large, slow-moving open gears and bearings typically found in mining and cement equipment.
Line: Gadus
An open gear lubricant from Shell’s Gadus S2 OG range, for heavily loaded open gears particularly found in grinding mills, kilns, shovels, draglines, ship loaders, stackers and reclaimers and excavator applications; can also serve as a single multi-service lubricant (multipurpose and open gear) for the entire machine on most shovels, excavators and draglines, excluding electric motor bearings.
Line: Gadus
A high-temperature open gear lubricant from Shell’s Gadus S2 OGH range, designed for use in applications such as rotary cement kiln gears and applied by spraying onto the gears; based upon an inorganic non-soap thickener dispersed in a high-viscosity base oil containing graphite.
Line: Gadus
A specialty open gear grease from Shell’s Gadus S2 range at a very soft NLGI 00/000 consistency, for spray-applied centralised lubrication systems on open gears and slow-rotating bearings.
Line: Gadus
A thread compound from Shell’s Gadus S2 range at NLGI 1 consistency, for lubricating and protecting drill-pipe threads and heavy-duty connections against galling and corrosion.
Line: Gadus
A thread compound from Shell’s Gadus S2 range at the stiffer NLGI 2 consistency, for lubricating and protecting drill-pipe threads and heavy-duty connections against galling and corrosion.
Line: Gadus
A multipurpose, non-soap grease from Shell’s Gadus S2 range, based on a non-melting bentonite clay thickener system at NLGI 1 consistency; gives excellent lubrication in wet or dry applications over a wide range of temperatures and is suitable where the lubricant is exposed to contaminants such as water and chemicals, including chemical plants and paper mills. Not recommended for centralised lubrication systems.
Line: Gadus
A multipurpose, non-soap grease from Shell’s Gadus S2 range, based on a non-melting bentonite clay thickener system at NLGI 2 consistency; gives excellent lubrication in wet or dry applications over a wide range of temperatures, suitable for chemical plants and paper mills exposed to water and chemical contaminants. Not recommended for centralised lubrication systems.
Line: Gadus
The NLGI 1 grade of Shell’s Gadus S2 U1000D multipurpose non-soap grease (the official replacement for Shell Rhodina EP (LF) per Shell’s own portfolio conversion guide), based on a bentonite clay thickener for resistance to water and chemical contamination.
Line: Gadus
The NLGI 2 grade of Shell’s Gadus S2 U1000D multipurpose non-soap grease (the official replacement for Shell Rhodina EP (LF) per Shell’s own portfolio conversion guide), based on a bentonite clay thickener for resistance to water and chemical contamination.
Line: Gadus
An inorganic non-soap thickener grease from Shell’s Gadus S2 range (previously known as Shell Darina Grease R 2), with a high-viscosity base oil and a special high-temperature oxidation inhibitor; provides satisfactory lubrication beyond the temperature limitations of lithium-based greases and, with caution, can be used above 200°C with a suitably adjusted relubrication interval.
Line: Gadus
A general-purpose grease from Shell’s Gadus S2 range based on a lithium hydroxystearate soap thickener at the softer NLGI 1 consistency, fortified with anti-oxidant, anti-wear and anti-rust additives.
Line: Gadus
A general-purpose grease from Shell’s Gadus S2 range based on a lithium hydroxystearate soap thickener at the stiffer NLGI 3 consistency, fortified with anti-oxidant, anti-wear and anti-rust additives.
Line: Gadus
A multipurpose grease from Shell’s Gadus S2 range (the official replacement for Shell Malleus JB per Shell’s own portfolio conversion guide), at NLGI 2 consistency for heavy-duty industrial applications.
Line: Gadus
A low-noise lithium grease from Shell’s Gadus S2 range, intended for rolling-element bearings (62mm) in electric motors where low noise level is a critical parameter; contains anti-oxidant additives.
Line: Gadus
A multipurpose grease from Shell’s Gadus S2 range for passenger car, light and heavy truck wheel bearings and chassis; especially suitable for cold climates with improved low-temperature performance.
Line: Gadus
A premium multi-purpose grease from Shell’s Gadus S2 range based on high viscosity index mineral oil and a lithium soap thickener, with state-of-the-art additives for excellent anti-wear and anti-corrosion properties; especially suitable for wheel bearings operating in severe conditions and under load, with change intervals up to 60,000km.
Line: Gadus
A premium quality, non-lead multipurpose grease from Shell’s Gadus S2 range based on lithium soap; originally conceived and patented by Shell and continuously improved over the years. Its multipurpose nature allows for use in both heavy-duty automotive and industrial applications.
Line: Gadus
A multipurpose extreme-pressure grease from Shell’s Gadus S2 range at a very soft NLGI 00 consistency, based on a blend of high viscosity index mineral oils and a lithium hydroxystearate soap thickener; formulated to offer good resistance to water wash-out.
Line: Gadus
A multipurpose extreme-pressure grease from Shell’s Gadus S2 range at the softer NLGI 1 consistency, based on a blend of high viscosity index mineral oils and a lithium hydroxystearate soap thickener; outstanding load-carrying capacity to withstand heavy and shock loads without failure of the lubricant film.
Line: Gadus
A high-quality multipurpose grease from Shell’s Gadus S2 V220AC range at the softer NLGI 1 consistency, based on high viscosity index mineral oil and a mixed lithium/calcium soap thickener; contains extreme-pressure, anti-wear, anti-oxidation and anti-corrosion additives. Operating range −20°C to 130°C, short-term up to 150°C.
Line: Gadus
A high-quality multipurpose grease from Shell’s Gadus S2 V220AC range at NLGI 2 consistency, based on high viscosity index mineral oil and a mixed lithium/calcium soap thickener; excellent mechanical stability retained even under severe vibration, demonstrated in the field with regreasing intervals above 30,000km even for demanding applications such as transmission joints.
Line: Gadus
A high-quality multipurpose grease from Shell’s Gadus S2 V220AC range at the stiffer NLGI 3 consistency, based on high viscosity index mineral oil and a mixed lithium/calcium soap thickener; contains extreme-pressure, anti-wear, anti-oxidation and anti-corrosion additives.
Line: Gadus
A high-performance bearing grease from Shell’s Gadus S2 V220AD range at the softer NLGI 1 consistency, for the lubrication of bearings subjected to harsh conditions; based on high viscosity index mineral oil and a mixed lithium/calcium soap thickener.
Line: Gadus
A high-performance bearing grease from Shell’s Gadus S2 V220AD range at NLGI 2 consistency, for the lubrication of bearings subjected to harsh conditions; based on high viscosity index mineral oil and a mixed lithium/calcium soap thickener.
Line: Gadus
A grease from Shell’s Gadus S2 range at NLGI 1 consistency; part of the comprehensive Shell Gadus family that includes multipurpose lubricants as well as speciality products, including advanced polyurea synthetic products designed for the most severe extreme-temperature and long-life applications.
Line: Gadus
A specialty grease from Shell’s Gadus S3 range for flexible gear couplings rotating at speeds greater than 300 rpm; a lithium polyethylene complex grease based on mineral oil, containing anti-oxidants, rust inhibitors, extreme-pressure and anti-wear additives.
Line: Gadus
A high-performance sprayable running-in aluminium complex grease from Shell’s Gadus S3 range (the official replacement for Shell Malleus RN per Shell’s own portfolio conversion guide), based on a part-synthetic base oil blend and containing micronised graphite as a solid lubricant; its chemistry is designed to cause a well-controlled smoothening process that reduces surface roughness on new and damaged open gears.
Line: Gadus
A high-technology grease from Shell’s Gadus S3 T range based on a diurea thickener, designed to give optimum performance for grease lubrication in industrial bearings; dropping point over 260°C and an operating range of −10°C to 160°C.
Line: Gadus
A high-performance, high-temperature, long-life grease from Shell’s Gadus S3 T range for heavy-duty industrial applications; based on fully synthetic base stocks and the latest diurea thickener technology, formulated specifically for the lubrication of high-temperature, slow-moving bearings such as continuous-casting bearings in the steel industry.
Line: Gadus
A grease from Shell’s Gadus S3 range, recommended for use in electric motor bearings such as those used in industrial pumps, fans and compressors.
Line: Gadus
A premium multi-purpose grease from Shell’s Gadus S3 V220C range at the softer NLGI 1 consistency, based on high viscosity index mineral oil and a lithium complex soap thickener; excellent high-temperature oxidation performance and protection from wear, corrosion and water. Operating range −25°C to 140°C.
Line: Gadus
A premium high-temperature multi-purpose grease from Shell’s Gadus S3 range (previous names: Shell Albida Grease HD 2, Shell Retinax SD 2), for heavy-duty industrial applications; based on high viscosity index mineral oil and a lithium complex soap thickener, especially suitable for slow-moving, heavy-duty large bearings operating at high temperature and under severe load.
Line: Gadus
A high-performance, high-temperature grease from Shell’s Gadus S3 V460D range (previous name: Shell Retinax SDX) at the softer NLGI 1 consistency, for slow-moving, heavily loaded large bearings subject to shock loading; contains 3% molybdenum disulphide, for winter use. Operating range −10°C to 150°C.
Line: Gadus
A premium multi-purpose heavy-duty grease from Shell’s Gadus S3 V460D range (previous names: Shell Retinax SDX, Shell Albida HDX 2) at NLGI 1.5 consistency; based on high viscosity index mineral oil and a lithium complex soap thickener, containing MoS2 to handle shock loads, for heavy-duty, slow-moving bearings in the mining and steel industries.
Line: Gadus
A high-performance, high-temperature grease from Shell’s Gadus S3 V460D range (previous name: Shell Retinax SDX) at NLGI 2 consistency, for slow-moving, heavily loaded large bearings subject to shock loading; contains solids to handle shock loads, for summer use.
Line: Gadus
A premium multi-purpose grease from Shell’s Gadus S3 range — the current name for the product previously marketed as Shell Gadus S3 V460D 2; a lithium complex grease with solids, for slow-moving, heavily loaded large bearings subject to shock loading in the construction and mining sectors. Operating range −20°C to 150°C.
Line: Gadus
A premium multi-purpose heavy-duty grease from Shell’s Gadus S3 range (previous name: Shell Albida SDM 1), for slow and very slow-moving heavy-duty plain and rolling-element bearings operating under extremely high continuous loads, shock loads, water-rich environments, or high-speed (>200 rpm) flexible gear couplings; main applications in steel, mining, cement and chemical industries.
Line: Gadus
A very soft NLGI 000 grease from Shell’s Gadus S3 range (the official replacement for Shell NL Grease 000 per Shell’s own portfolio conversion guide), for the penetrating lubrication of wire ropes.
Line: Gadus
A lithium/calcium complex grease from Shell’s Gadus S3 range (the official replacement for Shell ROV Cable Grease per Shell’s own portfolio conversion guide), based on a high-viscosity mineral oil containing anti-oxidants and corrosion inhibitors; specially designed for the lubrication and protection of wire ropes.
Line: Gadus
A stiffer NLGI 3 grease from Shell’s Gadus S3 range (the official replacement for Shell Malleus HDX per Shell’s own portfolio conversion guide), designed for the lubrication and protection of wire ropes in heavy-duty industrial applications.
Line: Gadus
A specialty grease from Shell’s Gadus S4 range (the official replacement for Shell Malleus JBZ per Shell’s own portfolio conversion guide), at NLGI 1.5 consistency for specialised heavy-duty industrial applications.
Line: Gadus
An advanced multipurpose grease from Shell’s Gadus S4 range for use in centralised lubrication systems. It has good pumpability and water resistance, and provides effective extreme-pressure properties for lubricating heavily loaded components. Based on highly refined mineral and selected synthetic base oils, providing excellent protection from −45°C to 120°C. Approved by Mercedes-Benz and MAN, suitable for centralised chassis lubrication systems on trucks and buses.
Line: Gadus
A high-performance, high-temperature, long-life grease from Shell’s Gadus S5 range at the softer NLGI 1.5 consistency, for heavy-duty industrial applications; uses fully synthetic base stocks and the latest diurea thickener technology, especially suitable for sealed and semi-sealed applications involving slow-moving, heavy-duty bearings operating at high temperatures and under severe loads.
Line: Gadus
An advanced extreme-pressure grease from Shell’s Gadus S5 range for high-speed bearings; can be used on electrical motors, high-speed bearings (loaded and unloaded), high-speed machine tool bearings, bearings of industrial fans, and wheel bearings requiring high DM ratings. Lower maintenance costs due to the extra-long service life obtainable in electrical motors and high-speed bearings.
Line: GadusRail
A lithium soap grease from Shell’s GadusRail S2 range at NLGI 1 consistency, fortified with a specifically formulated multipurpose additive package and 3% molybdenum disulfide for enhanced anti-wear and load-carrying properties; for railroad wheel/track lubrication, compatible with Bijur, Portec and Moore and Steele lubricator systems.
Line: GadusRail
A lithium soap grease from Shell’s GadusRail S2 range at NLGI 2 consistency, designed to improve lubricity and durability under hot weather conditions; contains 3% molybdenum disulfide and a highly shear-stable tackifier that improves grease adhesion to track surfaces.
Line: GadusRail
A long-life railroad grease from Shell’s GadusRail S3 range with extreme-pressure additives to provide higher load-carrying capacity; meets AAR M-942 (Revised 1992) and NSW SRA requirements, designed for long life and high load-carrying capacity in railroad axle box applications.
Line: GadusRail
A high-performance extreme-pressure grease from Shell’s GadusRail S3 range for heavily loaded railway axle bearings; based on a lithium thickener, free of solids, with good water resistance, complying with the European Union EN 12081 Class A grease specification for railroad axle bearings up to 200km/h; used in rail vehicles such as passenger wagons and railcars.
Line: GadusRail
A premium multi-purpose grease from Shell’s GadusRail S3 range with excellent mechanical stability at high temperatures and under vibrating conditions; based on high viscosity index mineral oil and a new lithium complex soap thickener, containing additives to enhance anti-oxidation, anti-wear and anti-corrosion properties; especially suitable for bearings operating at high temperatures, low and high speeds and in the presence of moisture.
Line: GadusRail
A calcium soap grease from Shell’s GadusRail S3 range at NLGI 1 consistency, fortified with a specifically formulated multipurpose additive package for use as a railroad track lubricant; offers improved protection specifically in wet and harsh conditions, exhibits a tenacious, tacky film that resists environmental conditions, and is suitable for use in a variety of automatic lubricators.
Line: GadusRail
A top-tier semi-synthetic lithium/calcium soap grease from Shell’s GadusRail S3 range at NLGI 2 consistency; allows better protection specifically in wet and other harsh conditions, with an advanced amount of solid additives; its outstanding friction reduction and long-lasting protection has been proven in extensive field trials on test tracks.
Line: GadusRail
An advanced grease from Shell’s GadusRail range (previous name: Shell Nerita Grease 2858) for high-speed European rail axle boxes; a lithium-based, long-life grease engineered for reliable performance under high-speed conditions and extended service intervals; approved by SNCF Group and suitable for trains operating over 200 kph.
Line: GadusRail
A biodegradable grease from Shell’s GadusRail S4 range at a very soft NLGI 000 consistency, designed for usage in onboard lubricators in the railway business requiring a thin grease meeting EN 16028 requirements; good anti-wear and anti-corrosive properties combined with pumpability in a wide range of temperatures.
Line: Morlina
The predecessor name for the product now marketed as “Shell Morlina S2 B 32” — a rust and oxidation (R&O) inhibited bearing and circulating oil at ISO VG 32, providing three-way protection for industrial equipment. This name is still in circulation among some distributors.
Line: Morlina
The predecessor name for the product now marketed as “Shell Morlina S2 B 46” — a rust and oxidation (R&O) inhibited bearing and circulating oil at ISO VG 46, providing three-way protection for industrial equipment. This name is still in circulation among some distributors.
Line: Morlina
The predecessor name for the product now marketed as “Shell Morlina S2 B 68” — a rust and oxidation (R&O) inhibited bearing and circulating oil at ISO VG 68, providing three-way protection for industrial equipment. This name is still in circulation among some distributors.
Line: Morlina
The predecessor name for the product now marketed as “Shell Morlina S2 B 100” — a rust and oxidation (R&O) inhibited bearing and circulating oil at ISO VG 100, providing three-way protection for industrial equipment. This name is still in circulation among some distributors.
Line: Morlina
The predecessor name for the product now marketed as “Shell Morlina S2 B 150” — a rust and oxidation (R&O) inhibited bearing and circulating oil at ISO VG 150, providing three-way protection for industrial equipment. This name is still in circulation among some distributors.
Line: Morlina
The predecessor name for the product now marketed as “Shell Morlina S2 B 220” — a rust and oxidation (R&O) inhibited bearing and circulating oil at ISO VG 220, providing three-way protection for industrial equipment. This name is still in circulation among some distributors.
Line: Morlina
The predecessor name for the product now marketed as “Shell Morlina S2 B 320” — a rust and oxidation (R&O) inhibited bearing and circulating oil at ISO VG 320, providing three-way protection for industrial equipment. This name is still in circulation among some distributors.
Line: Morlina
The predecessor name for the product now marketed as “Shell Morlina S2 B 460” — a rust and oxidation (R&O) inhibited bearing and circulating oil at ISO VG 460, providing three-way protection for industrial equipment. This name is still in circulation among some distributors.
Line: Morlina
A conventional, non-EP bearing and circulating oil from Shell’s Morlina S1 B range at ISO VG 100; for industrial applications requiring reliable rust and oxidation protection, approved by or meeting Primetals Morgoil® Lubricant Specification requirements.
Line: Morlina
A conventional, non-EP bearing and circulating oil from Shell’s Morlina S1 B range at ISO VG 150; for industrial applications requiring reliable rust and oxidation protection, approved by or meeting Primetals Morgoil® Lubricant Specification requirements.
Line: Morlina
A conventional, non-EP bearing and circulating oil from Shell’s Morlina S1 B range at ISO VG 220; for industrial applications requiring reliable rust and oxidation protection, approved by or meeting Primetals Morgoil® Lubricant Specification requirements.
Line: Morlina
A conventional, non-EP bearing and circulating oil from Shell’s Morlina S1 B range at ISO VG 320; for industrial applications requiring reliable rust and oxidation protection, approved by or meeting Primetals Morgoil® Lubricant Specification requirements.
Line: Morlina
A conventional, non-EP bearing and circulating oil from Shell’s Morlina S1 B range at ISO VG 460; for industrial applications requiring reliable rust and oxidation protection, approved by or meeting Primetals Morgoil® Lubricant Specification requirements.
Line: Morlina
A conventional, non-EP bearing and circulating oil from Shell’s Morlina S1 B range at ISO VG 680; for industrial applications requiring reliable rust and oxidation protection, approved by or meeting Primetals Morgoil® Lubricant Specification requirements.
Line: Morlina
A versatile, anti-wear protection bearing and circulating oil from Shell’s Morlina S2 B range at ISO VG 32, for industrial applications; formulated with a rust and oxidation inhibitor package for long oil life, approved by or meeting Primetals Morgoil®, Danieli, DIN 51517 and ISO 12925-1 CKB/CKE requirements.
Line: Morlina
A versatile, anti-wear protection bearing and circulating oil from Shell’s Morlina S2 B range at ISO VG 46, for industrial applications; formulated with a rust and oxidation inhibitor package for long oil life, approved by or meeting Primetals Morgoil®, Danieli, DIN 51517 and ISO 12925-1 CKB/CKE requirements.
Line: Morlina
A versatile, anti-wear protection bearing and circulating oil from Shell’s Morlina S2 B range at ISO VG 68, for industrial applications; formulated with a rust and oxidation inhibitor package for long oil life, approved by or meeting Primetals Morgoil®, Danieli, DIN 51517 and ISO 12925-1 CKB/CKE requirements.
Line: Morlina
A versatile, anti-wear protection bearing and circulating oil from Shell’s Morlina S2 B range at ISO VG 100, for industrial applications; formulated with a rust and oxidation inhibitor package for long oil life, approved by or meeting Primetals Morgoil®, Danieli, DIN 51517 and ISO 12925-1 CKB/CKE requirements.
Line: Morlina
A versatile, anti-wear protection bearing and circulating oil from Shell’s Morlina S2 B range at ISO VG 220, for industrial applications; formulated with a rust and oxidation inhibitor package for long oil life, approved by or meeting Primetals Morgoil®, Danieli, DIN 51517 and ISO 12925-1 CKB/CKE requirements.
Line: Morlina
A versatile, anti-wear protection bearing and circulating oil from Shell’s Morlina S2 B range at ISO VG 320, for industrial applications; formulated with a rust and oxidation inhibitor package for long oil life, approved by or meeting Primetals Morgoil®, Danieli, DIN 51517 and ISO 12925-1 CKB/CKE requirements.
Line: Morlina
A versatile, anti-wear protection bearing and circulating oil from Shell’s Morlina S2 B range at ISO VG 460, for industrial applications; formulated with a rust and oxidation inhibitor package for long oil life, approved by or meeting Primetals Morgoil®, Danieli, DIN 51517 and ISO 12925-1 CKB/CKE requirements.
Line: Morlina
A versatile, anti-wear protection bearing and circulating oil from Shell’s Morlina S2 B range at ISO VG 680, for industrial applications; formulated with a rust and oxidation inhibitor package for long oil life, approved by or meeting Primetals Morgoil®, Danieli, DIN 51517 and ISO 12925-1 CKB/CKE requirements.
Line: Morlina
A special-application bearing and circulating oil from Shell’s Morlina S2 BA range (previous name: Shell Morlina T), designed for demanding industrial environments such as steel mills, particularly Morgan (Primetals) No-Twist® Rod Mill Systems; provides excellent wear protection, corrosion resistance and system efficiency even under severe water contamination, suitable for applications requiring mild EP properties.
Line: Morlina
A specialty bearing and circulating oil from Shell’s Morlina S2 BA range at ISO VG 150, for MORGOIL bearing and steel mill circulating systems; extra protection and superior water separation for wet, contaminated conditions, suitable for No-Twist® mill systems.
Line: Morlina
A specialty bearing and circulating oil from Shell’s Morlina S2 BA range (previous name: Shell Morlina SD) at ISO VG 220, for MORGOIL bearing and steel mill circulating systems; extra protection and superior water separation for wet, contaminated conditions, suitable for No-Twist® mill systems.
Line: Morlina
A specialty bearing and circulating oil from Shell’s Morlina S2 BA range at ISO VG 320, for MORGOIL bearing and steel mill circulating systems; extra protection and superior water separation for wet, contaminated conditions, suitable for No-Twist® mill systems.
Line: Morlina
A specialty bearing and circulating oil from Shell’s Morlina S2 BA range at ISO VG 460, for MORGOIL bearing and steel mill circulating systems; extra protection and superior water separation for wet, contaminated conditions, suitable for No-Twist® mill systems.
Line: Morlina
A special low-viscosity, solvent-refined mineral oil from Shell’s Morlina S2 BL range at ISO VG 5, blended with zinc-free additives; provides extended performance in high-speed machine tool spindles, oil-lubricated plain and rolling element bearings, and circulating systems.
Line: Morlina
A special low-viscosity, solvent-refined mineral oil from Shell’s Morlina S2 BL range at ISO VG 10, blended with zinc-free additives; provides extended performance in high-speed machine tool spindles, oil-lubricated plain and rolling element bearings, and circulating systems.
Line: Morlina
A special low-viscosity, solvent-refined mineral oil from Shell’s Morlina S2 BL range at ISO VG 22, blended with zinc-free additives; provides extended performance in high-speed machine tool spindles, oil-lubricated plain and rolling element bearings, and circulating systems.
Line: Morlina
A premium rust and oxidation inhibited lubricating oil from Shell’s Morlina S3 BA range at ISO VG 100, providing excellent lubrication in MORGOIL® bearing and steel mill circulating systems; exceptional water separation characteristics make it highly suitable for hot, wet conditions, protecting equipment against corrosion and oil oxidation for long service life.
Line: Morlina
A premium rust and oxidation inhibited lubricating oil from Shell’s Morlina S3 BA range at ISO VG 150, providing excellent lubrication in MORGOIL® bearing and steel mill circulating systems; exceptional water separation characteristics make it highly suitable for hot, wet conditions, protecting equipment against corrosion and oil oxidation for long service life.
Line: Morlina
A premium rust and oxidation inhibited lubricating oil from Shell’s Morlina S3 BA range (previous name: Shell Morlina SD) at ISO VG 220, providing excellent lubrication in MORGOIL® bearing and steel mill circulating systems; exceptional water separation characteristics make it highly suitable for hot, wet conditions, protecting equipment against corrosion and oil oxidation for long service life.
Line: Morlina
A premium rust and oxidation inhibited lubricating oil from Shell’s Morlina S3 BA range at ISO VG 320, providing excellent lubrication in MORGOIL® bearing and steel mill circulating systems; exceptional water separation characteristics make it highly suitable for hot, wet conditions, protecting equipment against corrosion and oil oxidation for long service life.
Line: Morlina
A premium rust and oxidation inhibited lubricating oil from Shell’s Morlina S3 BA range at ISO VG 460, providing excellent lubrication in MORGOIL® bearing and steel mill circulating systems; exceptional water separation characteristics make it highly suitable for hot, wet conditions, protecting equipment against corrosion and oil oxidation for long service life.
Line: Morlina
A premium rust and oxidation inhibited lubricating oil from Shell’s Morlina S3 BA range at ISO VG 680, providing excellent lubrication in MORGOIL® bearing and steel mill circulating systems; exceptional water separation characteristics make it highly suitable for hot, wet conditions, protecting equipment against corrosion and oil oxidation for long service life.
Line: Morlina
A fully synthetic, high-performance bearing and circulation lubricant from Shell’s Morlina S4 B range at ISO VG 68, based on high-performance base fluids; offers the longest oil life in the Morlina range under severe conditions, superior low start-up temperature performance, improved energy efficiency, and excellent anti-wear and corrosion protection; recommended for moderately loaded gearboxes, worm gear drives, vacuum pumps and compressors, including certain "lubricated-for-life" systems.
Line: Morlina
A fully synthetic, high-performance bearing and circulation lubricant from Shell’s Morlina S4 B range at ISO VG 100, based on high-performance base fluids; offers the longest oil life in the Morlina range under severe conditions, superior low start-up temperature performance, improved energy efficiency, and excellent anti-wear and corrosion protection; recommended for moderately loaded gearboxes, worm gear drives, vacuum pumps and compressors, including certain "lubricated-for-life" systems.
Line: Morlina
A fully synthetic, high-performance bearing and circulation lubricant from Shell’s Morlina S4 B range at ISO VG 150, based on high-performance base fluids; offers the longest oil life in the Morlina range under severe conditions, superior low start-up temperature performance, improved energy efficiency, and excellent anti-wear and corrosion protection; recommended for moderately loaded gearboxes, worm gear drives, vacuum pumps and compressors, including certain "lubricated-for-life" systems.
Line: Morlina
A fully synthetic, high-performance bearing and circulation lubricant from Shell’s Morlina S4 B range at ISO VG 220, based on high-performance base fluids; offers the longest oil life in the Morlina range under severe conditions, superior low start-up temperature performance, improved energy efficiency, and excellent anti-wear and corrosion protection; recommended for moderately loaded gearboxes, worm gear drives, vacuum pumps and compressors, including certain "lubricated-for-life" systems.
Line: Morlina
A fully synthetic, high-performance bearing and circulation lubricant from Shell’s Morlina S4 B range at ISO VG 320, based on high-performance base fluids; offers the longest oil life in the Morlina range under severe conditions, superior low start-up temperature performance, improved energy efficiency, and excellent anti-wear and corrosion protection; recommended for moderately loaded gearboxes, worm gear drives, vacuum pumps and compressors, including certain "lubricated-for-life" systems.
Line: Morlina
A fully synthetic, high-performance bearing and circulation lubricant from Shell’s Morlina S4 B range at ISO VG 460, based on high-performance base fluids; offers the longest oil life in the Morlina range under severe conditions, superior low start-up temperature performance, improved energy efficiency, and excellent anti-wear and corrosion protection; recommended for moderately loaded gearboxes, worm gear drives, vacuum pumps and compressors, including certain "lubricated-for-life" systems.
Line: Morlina
A fully synthetic, high-performance bearing and circulation lubricant from Shell’s Morlina S4 B range at ISO VG 680, based on high-performance base fluids; offers the longest oil life in the Morlina range under severe conditions, superior low start-up temperature performance, improved energy efficiency, and excellent anti-wear and corrosion protection; recommended for moderately loaded gearboxes, worm gear drives, vacuum pumps and compressors, including certain "lubricated-for-life" systems.
Line: Morlina
A fully synthetic, high-performance bearing and circulation lubricant from Shell’s Morlina S4 B range at ISO VG 1000, based on high-performance base fluids; offers the longest oil life in the Morlina range under severe conditions, superior low start-up temperature performance, improved energy efficiency, and excellent anti-wear and corrosion protection; recommended for moderately loaded gearboxes, worm gear drives, vacuum pumps and compressors, including certain "lubricated-for-life" systems.
Line: Morlina
The predecessor name for a product now positioned within the “Shell Morlina S2 BA” tier; a special-application bearing and circulating oil at ISO VG 100, for challenging industrial systems such as Morgan No-Twist® mill systems. This name is still in circulation among some distributors.
Line: Morlina
The predecessor name for a product now positioned within the “Shell Morlina S2 BA” tier; a special-application bearing and circulating oil at ISO VG 150, for challenging industrial systems such as Morgan No-Twist® mill systems. This name is still in circulation among some distributors.
Line: Morlina
The predecessor name for a product now positioned within the “Shell Morlina S2 BA” tier; a special-application bearing and circulating oil at ISO VG 220, for challenging industrial systems such as Morgan No-Twist® mill systems. This name is still in circulation among some distributors.
Line: Mysella
The predecessor name for a product now positioned within Shell’s numbered Mysella gas-engine oil range (such as Mysella S2 Z or S3 N); a gas engine oil at grade 15W-40, for four-stroke, spark-ignition gas-fuelled engines. This name is still in circulation among some distributors.
Line: Mysella
The predecessor name for a product now positioned within Shell’s numbered Mysella gas-engine oil range (such as Mysella S2 Z or S3 N); a gas engine oil at grade 30, for four-stroke, spark-ignition gas-fuelled engines. This name is still in circulation among some distributors.
Line: Mysella
The predecessor name for a product now positioned within Shell’s numbered Mysella gas-engine oil range (such as Mysella S2 Z or S3 N); a gas engine oil at grade 40, for four-stroke, spark-ignition gas-fuelled engines. This name is still in circulation among some distributors.
Line: Mysella
A low-ash gas engine oil from Shell’s Mysella LA range at SAE 30, a long-established and well-proven product used extensively in four-stroke engines burning natural and sour gas, in dual-fuel engines and in gas compressor sets; carries a wide range of approvals from engine manufacturers including Cummins, MWM Deutz, Jenbacher, MTU, Ruston Diesels and Wärtsilä.
Line: Mysella
A low-ash gas engine oil from Shell’s Mysella LA range at SAE 40, a long-established and well-proven product used extensively in four-stroke engines burning natural and sour gas, in dual-fuel engines and in gas compressor sets; carries a wide range of approvals from engine manufacturers including Cummins, MWM Deutz, Jenbacher, MTU, Ruston Diesels and Wärtsilä.
Line: Mysella
A medium-ash gas engine oil from Shell’s Mysella MA range at SAE 30, offering API CD performance and a phosphorus level below 300 parts per million to meet the requirements of industrial exhaust gas catalytic converter manufacturers.
Line: Mysella
A medium-ash gas engine oil from Shell’s Mysella MA range at SAE 40, offering API CD performance and a phosphorus level below 300 parts per million to meet the requirements of industrial exhaust gas catalytic converter manufacturers.
Line: Mysella
The predecessor name for a product now positioned within the “Shell Mysella S3 Z” range; a very-low-ash-technology gas engine oil at SAE 30, for natural gas engines requiring an ash-less or very low ash product. This name is still in circulation among some distributors.
Line: Mysella
The predecessor name for a product now positioned within the “Shell Mysella S3 Z” range; a very-low-ash-technology gas engine oil at SAE 40, for natural gas engines requiring an ash-less or very low ash product. This name is still in circulation among some distributors.
Line: Mysella
A gas engine oil from Shell’s Mysella S2 N range at SAE 40, blended for use in 4-stroke, spark-ignition engines which require a ‘low ash’ oil and use natural gas as fuel.
Line: Mysella
A heavy-duty lubricant from Shell’s Mysella S2 Z range at SAE 30, for high performance natural gas engines which require an “ash-less” product; using ash-less technology it minimises engine wear and deposits in combustion chambers.
Line: Mysella
A heavy-duty lubricant from Shell’s Mysella S2 Z range at SAE 40, for high performance natural gas engines which require an “ash-less” product; using ash-less technology it minimises engine wear and deposits in combustion chambers.
Line: Mysella
A heavy-duty lubricant from Shell’s Mysella S2 Z range at SAE 40-15W, for high performance natural gas engines which require an “ash-less” product; using ash-less technology it minimises engine wear and deposits in combustion chambers.
Line: Mysella
A high performance gas engine oil from Shell’s Mysella S3 N range at SAE 30, blended for use in 4-stroke, spark-ignition engines that require a low ash oil and use natural gas as fuel; satisfies the new generation of stationary gas engines designed to meet emerging NOx emission legislation.
Line: Mysella
A medium ash gas engine oil from Shell’s Mysella S3 S range (previous name: Shell Mysella MA) at SAE 40, blended for use in 4-stroke, spark-ignition engines requiring a medium ash oil; approved for use in engines from manufacturers such as GE Jenbacher, MAN B&W and Waukesha, and suitable for engines using sour gases as fuel.
Line: Mysella
A high performance gas engine oil from Shell’s Mysella S3 Z range (previous name: Shell Mysella R) at SAE 30, designed for natural gas engines requiring an ash-less or very low ash product; using very low ash technology, it minimizes carbon and ash deposits on pistons, in ring belt areas, exhaust and intake ports and valve stems.
Line: Mysella
A high performance gas engine oil from Shell’s Mysella S3 Z range (previous name: Shell Mysella R) at SAE 40, designed for natural gas engines requiring an ash-less or very low ash product; using very low ash technology, it minimizes carbon and ash deposits on pistons, in ring belt areas, exhaust and intake ports and valve stems.
Line: Mysella
A high performance quality oil from Shell’s Mysella S5 N range (previous name: Shell Mysella XL) at SAE 40, blended for use in highly-rated, 4-stroke, spark-ignition engines which require a ‘low ash’ oil; satisfies the new generation of stationary gas engines designed to meet emerging NOx emission legislation and ‘lean’/‘clean’ burn technology, developed to provide extended drain intervals where oil life is a limiting operational factor.
Line: Mysella
A high performance quality oil from Shell’s Mysella S5 N range (previous name: Shell Mysella XL) at SAE 40-15W, blended for use in highly-rated, 4-stroke, spark-ignition engines which require a ‘low ash’ oil; satisfies the new generation of stationary gas engines designed to meet emerging NOx emission legislation and ‘lean’/‘clean’ burn technology, developed to provide extended drain intervals where oil life is a limiting operational factor.
Line: Mysella
A premium gas engine oil from Shell’s Mysella S5 S range at SAE 40, suitable for long drain intervals in natural gas applications.
Line: Mysella
A high-performance gas engine oil from Shell’s Mysella S6 N range at SAE 40, for highly-rated 4-stroke, spark-ignition engines, especially newer engines with stainless steel pistons where higher oil stress conditions can be experienced; offers extended oil life through better TBN retention, improved oxidation and nitration resistance, viscosity control and reduced formation of harmful acids.
Line: Mysella
A gas engine oil from Shell’s Mysella S6 range at SAE 40; part of Shell’s next-generation gas engine oil portfolio, listed alongside Mysella S3 N, S3 S, S5 N, S5 S and S7 N Ultra in Shell’s own official OEM approval comparison table (including base number and ash level data).
Line: Mysella
The most advanced gas engine oil in Shell’s Mysella range at SAE 40, designed for highly-rated 4-stroke, spark-ignition engines, especially those with steel pistons; ultra-extended oil life of up to 4,000 hours ODI (up to double previous-generation premium engine oils), proven over 45,000+ hours of field trials in more than 10 Jenbacher Type 6 engines, approved by INNIO for Jenbacher Type 6 (versions C, E, F, J, H, K) and Type 2 and 3 engines.
Line: Mysella
The predecessor name for a product now positioned within the “Shell Mysella S5 N” range; a high-performance, low-ash gas engine oil at SAE 30, for highly-rated 4-stroke, spark-ignition engines. This name is still in circulation among some distributors.
Line: Mysella
The predecessor name for a product now positioned within the “Shell Mysella S5 N” range; a high-performance, low-ash gas engine oil at SAE 40, for highly-rated 4-stroke, spark-ignition engines. This name is still in circulation among some distributors.
Line: Omala
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; an extreme-pressure industrial gear oil at ISO VG 68, for the lubrication of heavy-duty industrial gears. This name is still in circulation among some distributors.
Line: Omala
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; an extreme-pressure industrial gear oil at ISO VG 100, for the lubrication of heavy-duty industrial gears. This name is still in circulation among some distributors.
Line: Omala
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; an extreme-pressure industrial gear oil at ISO VG 150, for the lubrication of heavy-duty industrial gears. This name is still in circulation among some distributors.
Line: Omala
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; an extreme-pressure industrial gear oil at ISO VG 220, for the lubrication of heavy-duty industrial gears. This name is still in circulation among some distributors.
Line: Omala
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; an extreme-pressure industrial gear oil at ISO VG 320, for the lubrication of heavy-duty industrial gears. This name is still in circulation among some distributors.
Line: Omala
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; an extreme-pressure industrial gear oil at ISO VG 460, for the lubrication of heavy-duty industrial gears. This name is still in circulation among some distributors.
Line: Omala
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; an extreme-pressure industrial gear oil at ISO VG 680, for the lubrication of heavy-duty industrial gears. This name is still in circulation among some distributors.
Line: Omala
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; an extreme-pressure industrial gear oil at ISO VG 800, for the lubrication of heavy-duty industrial gears. This name is still in circulation among some distributors.
Line: Omala
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; an extreme-pressure industrial gear oil at ISO VG 1000, for the lubrication of heavy-duty industrial gears. This name is still in circulation among some distributors.
Line: Omala
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; a premium quality, lead-free, extreme-pressure industrial gear oil at ISO VG 220, formally approved by Flender AG; offers high load carrying capacity and anti-friction characteristics for superior performance in gears and other industrial applications, plus excellent water separation properties.
Line: Omala
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; a premium quality, lead-free, extreme-pressure industrial gear oil at ISO VG 320, formally approved by Flender AG; offers high load carrying capacity and anti-friction characteristics for superior performance in gears and other industrial applications, plus excellent water separation properties.
Line: Omala
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; a premium quality, lead-free, extreme-pressure industrial gear oil at ISO VG 460, formally approved by Flender AG; offers high load carrying capacity and anti-friction characteristics for superior performance in gears and other industrial applications, plus excellent water separation properties.
Line: Omala
A high-performance, fully synthetic, extreme-pressure industrial gear oil from Shell’s Omala HD range (previous name: Shell Hyperia S) at ISO VG 100, the top tier of the Omala portfolio; displays excellent stability at high temperatures and high load carrying capacity, fully compatible with mineral oils and offering extended oil service life, for all types of industrial enclosed gear systems and those subject to extreme temperatures and heavy loads.
Line: Omala
A high-performance, fully synthetic, extreme-pressure industrial gear oil from Shell’s Omala HD range (previous name: Shell Hyperia S) at ISO VG 150, the top tier of the Omala portfolio; displays excellent stability at high temperatures and high load carrying capacity, fully compatible with mineral oils and offering extended oil service life, for all types of industrial enclosed gear systems and those subject to extreme temperatures and heavy loads.
Line: Omala
A high-performance, fully synthetic, extreme-pressure industrial gear oil from Shell’s Omala HD range (previous name: Shell Hyperia S) at ISO VG 220, the top tier of the Omala portfolio; displays excellent stability at high temperatures and high load carrying capacity, fully compatible with mineral oils and offering extended oil service life, for all types of industrial enclosed gear systems and those subject to extreme temperatures and heavy loads.
Line: Omala
A high-performance, fully synthetic, extreme-pressure industrial gear oil from Shell’s Omala HD range (previous name: Shell Hyperia S) at ISO VG 320, the top tier of the Omala portfolio; displays excellent stability at high temperatures and high load carrying capacity, fully compatible with mineral oils and offering extended oil service life, for all types of industrial enclosed gear systems and those subject to extreme temperatures and heavy loads.
Line: Omala
A high-performance, fully synthetic, extreme-pressure industrial gear oil from Shell’s Omala HD range (previous name: Shell Hyperia S) at ISO VG 460, the top tier of the Omala portfolio; displays excellent stability at high temperatures and high load carrying capacity, fully compatible with mineral oils and offering extended oil service life, for all types of industrial enclosed gear systems and those subject to extreme temperatures and heavy loads.
Line: Omala
A polyalphaolefin (PAO) based synthetic industrial gear oil from Shell’s Omala RL range at ISO VG 220, for industrial gear systems requiring a synthetic lubricant for wide-temperature performance and long service life.
Line: Omala
A polyalphaolefin (PAO) based synthetic industrial gear oil from Shell’s Omala RL range at ISO VG 320; formulated to provide a long oil life with excellent oxidative stability, film strength, lubricity and wear protection, designed for use in a wide range of gear applications.
Line: Omala
A polyalphaolefin (PAO) based synthetic industrial gear oil from Shell’s Omala RL range at ISO VG 460; formulated to provide a long oil life with excellent oxidative stability, film strength, lubricity and wear protection, designed for use in a wide range of gear applications.
Line: Omala
A quality refined, high viscosity mineral oil compounded with a small percentage of fatty oils from Shell’s Omala S1 W range at ISO VG 460; particularly suitable for the lubrication of low speed enclosed gears and worm drive applications.
Line: Omala
A quality refined, high viscosity mineral oil compounded with a small percentage of fatty oils from Shell’s Omala S1 W range (previous name: Valvata J 680) at ISO VG 680; may be used to advantage in worm gears prone to suffer extensive wear and to reduce bulk oil temperature, typical examples being gears running at low speed under stop-start conditions; also suitable for high temperature, high pressure steam cylinder applications.
Line: Omala
An extreme-pressure industrial gear oil from Shell’s Omala S2 G range at ISO VG 68, designed primarily for the lubrication of heavy duty industrial gears; high load carrying capacity and anti-friction characteristics combine to offer superior performance in gears, suitable for enclosed industrial gear systems using steel spur and helical gears as well as bearings and other components in circulating and splash-lubricated systems.
Line: Omala
An extreme-pressure industrial gear oil from Shell’s Omala S2 G range at ISO VG 100, designed primarily for the lubrication of heavy duty industrial gears; high load carrying capacity and anti-friction characteristics combine to offer superior performance in gears, suitable for enclosed industrial gear systems using steel spur and helical gears as well as bearings and other components in circulating and splash-lubricated systems.
Line: Omala
An extreme-pressure industrial gear oil from Shell’s Omala S2 G range at ISO VG 150, designed primarily for the lubrication of heavy duty industrial gears; high load carrying capacity and anti-friction characteristics combine to offer superior performance in gears, suitable for enclosed industrial gear systems using steel spur and helical gears as well as bearings and other components in circulating and splash-lubricated systems.
Line: Omala
An extreme-pressure industrial gear oil from Shell’s Omala S2 G range at ISO VG 320, designed primarily for the lubrication of heavy duty industrial gears; high load carrying capacity and anti-friction characteristics combine to offer superior performance in gears, suitable for enclosed industrial gear systems using steel spur and helical gears as well as bearings and other components in circulating and splash-lubricated systems.
Line: Omala
An extreme-pressure industrial gear oil from Shell’s Omala S2 G range at ISO VG 460, designed primarily for the lubrication of heavy duty industrial gears; high load carrying capacity and anti-friction characteristics combine to offer superior performance in gears, suitable for enclosed industrial gear systems using steel spur and helical gears as well as bearings and other components in circulating and splash-lubricated systems.
Line: Omala
An extreme-pressure industrial gear oil from Shell’s Omala S2 G range at ISO VG 680, designed primarily for the lubrication of heavy duty industrial gears; high load carrying capacity and anti-friction characteristics combine to offer superior performance in gears, suitable for enclosed industrial gear systems using steel spur and helical gears as well as bearings and other components in circulating and splash-lubricated systems.
Line: Omala
An extreme-pressure industrial gear oil from Shell’s Omala S2 G range at ISO VG 1000, designed primarily for the lubrication of heavy duty industrial gears; high load carrying capacity and anti-friction characteristics combine to offer superior performance in gears, suitable for enclosed industrial gear systems using steel spur and helical gears as well as bearings and other components in circulating and splash-lubricated systems.
Line: Omala
An extreme-pressure industrial gear oil from Shell’s Omala S2 GX range at ISO VG 68; approved by Siemens for Flender gearboxes and helical, bevel and planetary gear units, and by many other equipment manufacturers, suitable for a wide range of enclosed industrial gearboxes used in general manufacturing, mining, steel, power, paper, auto components and cement industries.
Line: Omala
An extreme-pressure industrial gear oil from Shell’s Omala S2 GX range at ISO VG 100; approved by Siemens for Flender gearboxes and helical, bevel and planetary gear units, and by many other equipment manufacturers, suitable for a wide range of enclosed industrial gearboxes used in general manufacturing, mining, steel, power, paper, auto components and cement industries.
Line: Omala
An extreme-pressure industrial gear oil from Shell’s Omala S2 GX range at ISO VG 150; approved by Siemens for Flender gearboxes and helical, bevel and planetary gear units, and by many other equipment manufacturers, suitable for a wide range of enclosed industrial gearboxes used in general manufacturing, mining, steel, power, paper, auto components and cement industries.
Line: Omala
An extreme-pressure industrial gear oil from Shell’s Omala S2 GX range at ISO VG 220; approved by Siemens for Flender gearboxes and helical, bevel and planetary gear units, and by many other equipment manufacturers, suitable for a wide range of enclosed industrial gearboxes used in general manufacturing, mining, steel, power, paper, auto components and cement industries.
Line: Omala
An extreme-pressure industrial gear oil from Shell’s Omala S2 GX range at ISO VG 320; approved by Siemens for Flender gearboxes and helical, bevel and planetary gear units, and by many other equipment manufacturers, suitable for a wide range of enclosed industrial gearboxes used in general manufacturing, mining, steel, power, paper, auto components and cement industries.
Line: Omala
An extreme-pressure industrial gear oil from Shell’s Omala S2 GX range at ISO VG 460; approved by Siemens for Flender gearboxes and helical, bevel and planetary gear units, and by many other equipment manufacturers, suitable for a wide range of enclosed industrial gearboxes used in general manufacturing, mining, steel, power, paper, auto components and cement industries.
Line: Omala
An extreme-pressure industrial gear oil from Shell’s Omala S2 GX range at ISO VG 680; approved by Siemens for Flender gearboxes and helical, bevel and planetary gear units, and by many other equipment manufacturers, suitable for a wide range of enclosed industrial gearboxes used in general manufacturing, mining, steel, power, paper, auto components and cement industries.
Line: Omala
An extreme-pressure industrial gear oil from Shell’s Omala S2 GX range at ISO VG 1000; approved by Siemens for Flender gearboxes and helical, bevel and planetary gear units, and by many other equipment manufacturers, suitable for a wide range of enclosed industrial gearboxes used in general manufacturing, mining, steel, power, paper, auto components and cement industries.
Line: Omala
An industrial gear oil from Shell’s Omala S3 GP range at ISO VG 220, providing extra load protection for industrial gears; designed to help solve problems associated with worn, misaligned and contaminated gears, and to help prevent foaming and water contamination which can reduce gear performance under extreme pressure and contaminated conditions.
Line: Omala
An industrial gear oil from Shell’s Omala S3 GP range at ISO VG 320, providing extra load protection for industrial gears; designed to help solve problems associated with worn, misaligned and contaminated gears, and to help prevent foaming and water contamination which can reduce gear performance under extreme pressure and contaminated conditions.
Line: Omala
An industrial gear oil from Shell’s Omala S3 GP range at ISO VG 460, providing extra load protection for industrial gears; designed to help solve problems associated with worn, misaligned and contaminated gears, and to help prevent foaming and water contamination which can reduce gear performance under extreme pressure and contaminated conditions.
Line: Omala
An industrial gear oil from Shell’s Omala S3 GP range at ISO VG 680, providing extra load protection for industrial gears; designed to help solve problems associated with worn, misaligned and contaminated gears, and to help prevent foaming and water contamination which can reduce gear performance under extreme pressure and contaminated conditions.
Line: Omala
An industrial gear oil from Shell’s Omala S3 GP range at ISO VG 1500, providing extra load protection for industrial gears; designed to help solve problems associated with worn, misaligned and contaminated gears, and to help prevent foaming and water contamination which can reduce gear performance under extreme pressure and contaminated conditions.
Line: Omala
A synthetic, biodegradable industrial gear lubricant from Shell’s Omala S3 W range at ISO VG 100, for enclosed industrial gears including worm gears; designed for applications such as dockside and marine mobile equipment, forestry, wind turbines and other industrial operations where spills into water require an environmentally appropriate lubricant; rated as “anti-wear (AW)” according to ASTM D7043 and FZG testing.
Line: Omala
A synthetic, biodegradable industrial gear lubricant from Shell’s Omala S3 W range at ISO VG 150, for enclosed industrial gears including worm gears; designed for applications such as dockside and marine mobile equipment, forestry, wind turbines and other industrial operations where spills into water require an environmentally appropriate lubricant; rated as “anti-wear (AW)” according to ASTM D7043 and FZG testing.
Line: Omala
A synthetic, biodegradable industrial gear lubricant from Shell’s Omala S3 W range at ISO VG 220, for enclosed industrial gears including worm gears; designed for applications such as dockside and marine mobile equipment, forestry, wind turbines and other industrial operations where spills into water require an environmentally appropriate lubricant; rated as “anti-wear (AW)” according to ASTM D7043 and FZG testing.
Line: Omala
A high-performance gear system lubricant from Shell’s Omala range, specifically for the wind energy sector; specifically designed to operate efficiently at low temperatures, ensuring excellent wear protection even in cold conditions.
Line: Omala
An advanced synthetic industrial gear oil from Shell’s Omala S4 GX range at ISO VG 150, formulated to have excellent load carrying capacity and micro-pitting performance providing long component life even under shock loading conditions; this performance is recognized by Flender AG where a formal approval for 20,000 hours (four years) at 80°C usage has been granted.
Line: Omala
An advanced synthetic industrial gear oil from Shell’s Omala S4 GX range at ISO VG 220, formulated to have excellent load carrying capacity and micro-pitting performance providing long component life even under shock loading conditions; this performance is recognized by Flender AG where a formal approval for 20,000 hours (four years) at 80°C usage has been granted.
Line: Omala
An advanced synthetic industrial gear oil from Shell’s Omala S4 GX range at ISO VG 460, formulated to have excellent load carrying capacity and micro-pitting performance providing long component life even under shock loading conditions; this performance is recognized by Flender AG where a formal approval for 20,000 hours (four years) at 80°C usage has been granted.
Line: Omala
An advanced synthetic industrial gear oil from Shell’s Omala S4 GX range at ISO VG 680, formulated to have excellent load carrying capacity and micro-pitting performance providing long component life even under shock loading conditions; this performance is recognized by Flender AG where a formal approval for 20,000 hours (four years) at 80°C usage has been granted.
Line: Omala
An advanced, versatile synthetic industrial gear oil from Shell’s Omala S4 GXV range at ISO VG 68; approved by Siemens MD for Flender gear units and gear motors, and approved for wind turbine gearboxes by Gamesa, Dongfang Wind Turbines, Dalian Heavy Industries and Sinovel; suitable for wind turbines and other hard-to-reach installations, enclosed industrial gear systems operating under severe conditions, and bearings in circulating or splash-lubricated systems.
Line: Omala
An advanced, versatile synthetic industrial gear oil from Shell’s Omala S4 GXV range at ISO VG 150; approved by Siemens MD for Flender gear units and gear motors, and approved for wind turbine gearboxes by Gamesa, Dongfang Wind Turbines, Dalian Heavy Industries and Sinovel; suitable for wind turbines and other hard-to-reach installations, enclosed industrial gear systems operating under severe conditions, and bearings in circulating or splash-lubricated systems.
Line: Omala
An advanced, versatile synthetic industrial gear oil from Shell’s Omala S4 GXV range at ISO VG 220; approved by Siemens MD for Flender gear units and gear motors, and approved for wind turbine gearboxes by Gamesa, Dongfang Wind Turbines, Dalian Heavy Industries and Sinovel; suitable for wind turbines and other hard-to-reach installations, enclosed industrial gear systems operating under severe conditions, and bearings in circulating or splash-lubricated systems.
Line: Omala
An advanced, versatile synthetic industrial gear oil from Shell’s Omala S4 GXV range at ISO VG 320; approved by Siemens MD for Flender gear units and gear motors, and approved for wind turbine gearboxes by Gamesa, Dongfang Wind Turbines, Dalian Heavy Industries and Sinovel; suitable for wind turbines and other hard-to-reach installations, enclosed industrial gear systems operating under severe conditions, and bearings in circulating or splash-lubricated systems.
Line: Omala
An advanced, versatile synthetic industrial gear oil from Shell’s Omala S4 GXV range at ISO VG 460; approved by Siemens MD for Flender gear units and gear motors, and approved for wind turbine gearboxes by Gamesa, Dongfang Wind Turbines, Dalian Heavy Industries and Sinovel; suitable for wind turbines and other hard-to-reach installations, enclosed industrial gear systems operating under severe conditions, and bearings in circulating or splash-lubricated systems.
Line: Omala
An advanced, versatile synthetic industrial gear oil from Shell’s Omala S4 GXV range at ISO VG 680; approved by Siemens MD for Flender gear units and gear motors, and approved for wind turbine gearboxes by Gamesa, Dongfang Wind Turbines, Dalian Heavy Industries and Sinovel; suitable for wind turbines and other hard-to-reach installations, enclosed industrial gear systems operating under severe conditions, and bearings in circulating or splash-lubricated systems.
Line: Omala
An advanced, versatile synthetic industrial gear oil from Shell’s Omala S4 GXV range at ISO VG 1000; approved by Siemens MD for Flender gear units and gear motors, and approved for wind turbine gearboxes by Gamesa, Dongfang Wind Turbines, Dalian Heavy Industries and Sinovel; suitable for wind turbines and other hard-to-reach installations, enclosed industrial gear systems operating under severe conditions, and bearings in circulating or splash-lubricated systems.
Line: Omala
An advanced synthetic heavy duty industrial worm drive gear oil from Shell’s Omala S4 WE range (previous name: Shell Tivela S) at ISO VG 150, formulated using specially selected polyalkylene glycol base fluids and additives; offers outstanding lubrication performance under severe operating conditions, including improved energy efficiency, long service life and high resistance to micro-pitting; particularly recommended for systems where maintenance is infrequent or systems are inaccessible (e.g. yaw gears in wind turbine installations).
Line: Omala
An advanced synthetic heavy duty industrial worm drive gear oil from Shell’s Omala S4 WE range (previous name: Shell Tivela S) at ISO VG 220, formulated using specially selected polyalkylene glycol base fluids and additives; offers outstanding lubrication performance under severe operating conditions, including improved energy efficiency, long service life and high resistance to micro-pitting; particularly recommended for systems where maintenance is infrequent or systems are inaccessible (e.g. yaw gears in wind turbine installations).
Line: Omala
An advanced synthetic heavy duty industrial worm drive gear oil from Shell’s Omala S4 WE range (previous name: Shell Tivela S) at ISO VG 320, formulated using specially selected polyalkylene glycol base fluids and additives; offers outstanding lubrication performance under severe operating conditions, including improved energy efficiency, long service life and high resistance to micro-pitting; particularly recommended for systems where maintenance is infrequent or systems are inaccessible (e.g. yaw gears in wind turbine installations).
Line: Omala
An advanced synthetic heavy duty industrial worm drive gear oil from Shell’s Omala S4 WE range (previous name: Shell Tivela S) at ISO VG 460, formulated using specially selected polyalkylene glycol base fluids and additives; offers outstanding lubrication performance under severe operating conditions, including improved energy efficiency, long service life and high resistance to micro-pitting; particularly recommended for systems where maintenance is infrequent or systems are inaccessible (e.g. yaw gears in wind turbine installations).
Line: Omala
An advanced synthetic heavy duty industrial worm drive gear oil from Shell’s Omala S4 WE range (previous name: Shell Tivela S) at ISO VG 680, formulated using specially selected polyalkylene glycol base fluids and additives; offers outstanding lubrication performance under severe operating conditions, including improved energy efficiency, long service life and high resistance to micro-pitting; particularly recommended for systems where maintenance is infrequent or systems are inaccessible (e.g. yaw gears in wind turbine installations).
Line: Omala
A specialty gear oil from Shell’s Omala S4 Wheel range at ISO VG 220, formulated specifically for the wheel motor drives on heavy mining trucks; part of Shell’s comprehensive Omala industrial gear oil portfolio, optimised for a wide range of gear types and applications.
Line: Omala
A specialty gear oil from Shell’s Omala S4 Wheel range at ISO VG 320, formulated specifically for the wheel motor drives on heavy mining trucks; part of Shell’s comprehensive Omala industrial gear oil portfolio, optimised for a wide range of gear types and applications.
Line: Omala
A specialty gear oil from Shell’s Omala S4 Wheel range at ISO VG 460, formulated specifically for the wheel motor drives on heavy mining trucks; part of Shell’s comprehensive Omala industrial gear oil portfolio, optimised for a wide range of gear types and applications.
Line: Omala
A specialty gear oil from Shell’s Omala S4 Wheel range at ISO VG 680, formulated specifically for the wheel motor drives on heavy mining trucks; part of Shell’s comprehensive Omala industrial gear oil portfolio, optimised for a wide range of gear types and applications.
Line: Omala
A fully synthetic gear oil and Shell’s most technologically advanced product for wind turbines, from the Omala S5 Wind range at ISO VG 320; specifically designed to operate efficiently at low temperatures, offering extended oil life and maintenance intervals for wind turbines; recommended for wind turbine main gear drives.
Line: Spirax
A high-performance multigrade, extreme-pressure, multipurpose gear lubricant from Shell’s Spirax HD range at SAE 80W-90, suitable for heavy-duty and conventional truck and automotive differentials, manual transmissions and oil lubricated wheel bearings; meets the requirements of API GL-5 and MIL-PRF-2105E; contains a sulfur/phosphorus additive system for excellent load carrying capacity plus inhibitors against oxidation, corrosion, rust and foaming.
Line: Spirax
A high-performance multigrade, extreme-pressure, multipurpose gear lubricant from Shell’s Spirax HD range at SAE 85W-140, suitable for heavy-duty and conventional truck and automotive differentials, manual transmissions and oil lubricated wheel bearings; meets the requirements of API GL-5 and MIL-PRF-2105E; contains a sulfur/phosphorus additive system for excellent load carrying capacity plus inhibitors against oxidation, corrosion, rust and foaming.
Line: Spirax
An extreme-pressure lubricant from Shell’s Spirax MB range at SAE 90, containing multi-functional additives which impart good anti-wear, oxidation stability and anti-rust characteristics; suitable for a variety of industrial and automotive gears.
Line: Spirax
A high quality automotive transmission, power steering and hydraulic oil from Shell’s Spirax S1 ATF range (previous name: Shell Donax TM), mainly used for heavy-duty vehicles working in an ‘off-road’ environment; for powershift and industrial torque converters and applications calling for a GM Type ‘A’ Suffix ‘A’ performance fluid.
Line: Spirax
A quality automatic transmission fluid from Shell’s Spirax S1 ATF range, specially formulated to meet the lubrication requirements of specific automatic transmission units, power steering systems and hydraulic systems; based on a blend of high viscosity index oils and proven additives, to provide protection in units requiring a non-friction fluid; meets Ford Specification ESW-M2C33-G.
Line: Spirax
An automotive axle oil from Shell’s Spirax S2 A range at SAE 80W-90, blended for use in a wide variety of automotive axle units subjected to heavy duty conditions.
Line: Spirax
An automotive axle oil from Shell’s Spirax S2 A range at SAE 85W-140, blended for use in a wide variety of automotive axle units subjected to heavy duty conditions.
Line: Spirax
A proven performance axle oil from Shell’s Spirax S2 ALS range at SAE 90, designed for automotive limited slip differentials.
Line: Spirax
A proven performance automatic transmission fluid from Shell’s Spirax S2 ATF range, designed for Allison transmissions meeting the TES 389 specification.
Line: Spirax
A proven performance automatic transmission fluid from Shell’s Spirax S2 ATF range, designed for MAN, Voith and ZF transmissions.
Line: Spirax
A proven performance automatic transmission fluid from Shell’s Spirax S2 ATF range, meeting the Dexron® IID standard.
Line: Spirax
A fit-for-purpose SAE 15W-30 universal tractor transmission oil (UTTO) from Shell’s Spirax S2 TQ range, meeting major manufacturers’ requirements and reducing brake noise.
Line: Spirax
A proven performance, ZF-approved axle oil from Shell’s Spirax S3 ALS range at SAE 80W-90, for limited slip differentials.
Line: Spirax
A proven performance, ZF-approved axle oil from Shell’s Spirax S3 ALS range at SAE 85W-140, for limited slip differentials.
Line: Spirax
A proven performance, ZF-approved axle oil from Shell’s Spirax S3 ALS range at SAE 85W-90, for limited slip differentials.
Line: Spirax
A true universal driveline oil from Shell’s Spirax S3 AM range at SAE 80W-90, designed for use in modern heavy duty axles and gearboxes offering the convenience of one transmission oil for the whole driveline; specially optimised mineral base oils and new additive technology improve lubrication of the drive train and potentially extend oil drain intervals; for OEMs such as MAN, ZF, MACK and Scania.
Line: Spirax
A proven performance GL-5 axle oil from Shell’s Spirax S3 AS range at SAE 80W-140, for Scania and ZF.
Line: Spirax
A proven performance automatic transmission fluid from Shell’s Spirax S3 ATF range, meeting Dexron® III and Mercon® standards.
Line: Spirax
A high performance, API GL-5 gear and axle oil from Shell’s Spirax S3 AX range at SAE 80W-90, for moderate to heavily loaded on and off-road driveline applications; reduced friction for improved efficiency.
Line: Spirax
A high performance, API GL-5 gear and axle oil from Shell’s Spirax S3 AX range at SAE 85W-140, for moderate to heavily loaded on and off-road driveline applications.
Line: Spirax
A proven performance gearbox oil from Shell’s Spirax S3 G range at SAE 80W, meeting API GL-4 and key manufacturers’ specifications.
Line: Spirax
A premium-performance SAE 15W-40 super tractor oil universal (STOU) from Shell’s Spirax S3 T range, meeting major manufacturers’ requirements (including Fendt Vario).
Line: Spirax
A specially friction-modified universal tractor transmission oil (UTTO) from Shell’s Spirax S3 TLV range at SAE 5W-20, designed for use in transmission, differential, hydraulic and oil immersed brakes as well as power takeoff systems in agricultural tractors and off-road equipment; provides noise-free oil immersed (wet) brake performance combined with reliable, trouble-free operation.
Line: Spirax
A part-synthetic, superior quality automotive gear lubricant from Shell’s Spirax S4 AT range at SAE 75W-90, specially designed for use in gearboxes and axles.
Line: Spirax
A superior quality automatic transmission fluid from Shell’s Spirax S4 ATF range (previous name: Shell Donax TX) based on synthetic technology, suitable for a wide range of heavy duty automotive transport and passenger car transmissions; the ultimate performance automatic transmission fluid allowing extended drain intervals even under the most severe conditions; approved under Mercedes-Benz specification sheet 236.9.
Line: Spirax
A high-performance off-highway transmission and hydraulic oil from Shell’s Spirax S4 CX range (previous name: Shell Donax TC 10W) at SAE 10W, meeting the demanding requirements of modern transmission, oil-immersed brake and hydraulic systems fitted to heavy-duty off-highway equipment; for manufacturers such as Caterpillar, Komatsu and Komatsu-Dresser, and transmissions by Eaton, Eaton Fuller, ZF, Dana and Rockwell.
Line: Spirax
A high performance off-highway transmission and final drive oil from Shell’s Spirax S4 CX range at SAE 30, recommended for use in heavy duty off-highway equipment produced by the world’s leading manufacturers including Caterpillar and Komatsu.
Line: Spirax
A high performance off-highway transmission and final drive oil from Shell’s Spirax S4 CX range (previous name: Shell Donax TC 50) at SAE 50, meeting the demanding requirements of modern transmission, final drive, and oil immersed brakes fitted to heavy-duty off-highway equipment; for Caterpillar, Komatsu, Komatsu-Dresser and transmissions by Eaton, Eaton Fuller, ZF, Dana, Rockwell.
Line: Spirax
An automotive gearbox oil from Shell’s Spirax S4 G range at SAE 75W-90, meeting API GL-4 and Volkswagen VW TL 50150 / VW 501.50 specifications.
Line: Spirax
A high-performance super tractor oil universal (STOU) from Shell’s Spirax S4 TX range, based on Shell’s XHVI base oil; improved protection, fuel efficiency, less maintenance and wider application, meeting major manufacturers’ requirements.
Line: Spirax
A premium synthetic gearbox oil from Shell’s Spirax S5 ATE range at SAE 75W-90, GL-4/5, particularly designed to fulfil the highest requirements of extremely loaded passenger car drive train systems; particularly for heavily loaded “transaxle” transmissions where hypoid axle and gearbox are in the same housing, recognised and used as initial and service fill gear oil by leading sports car manufacturers.
Line: Spirax
An exceptional performance, versatile application automatic transmission fluid from Shell’s Spirax S5 ATF range; approved by Aisin JWS 3309 (all applications), Allison C4, and Ford Mercon® specifications.
Line: Spirax
A premium performance automatic transmission fluid from Shell’s Spirax S6 ATF range, designed for Mercedes-Benz 5- and 7-speed automatic and NAG2VSport transmissions; meets MB-Approval 236.14.
Line: Spirax
A fully synthetic, heavy-duty automatic transmission fluid from Shell’s Spirax S6 ATF range, specifically designed and approved for use in transmissions requiring Allison TES-295 fluids; approved for extended service intervals and remains stable even under severe operating conditions.
Line: Spirax
A premium performance automatic transmission fluid from Shell’s Spirax S6 ATF range, meeting the Dexron® VI standard and General Motors GMN10060 specification; approved by major manufacturers.
Line: Spirax
A premium technology automatic transmission fluid from Shell’s Spirax S6 ATF range, designed for the latest generation of Mercedes-Benz 9-speed automatic transmissions (9G-Tronic); developed as an initial-fill and service-fill fluid for this generation of fuel-economy optimised transmissions, and must not be used in older Mercedes-Benz 5- and 7-speed automatic transmissions requiring MB-Approvals 236.10, 236.12, 236.14 or 236.15.
Line: Spirax
A fully synthetic, premium quality, heavy-duty automatic transmission fluid from Shell’s Spirax S6 ATF range, specifically designed in partnership with ZF as an exclusive lubricant for the newest generation of ZF-Ecomat and ZF-Ecolife transmissions; reliable for 150,000km or three years even under severe conditions.
Line: Spirax
A unique fuel-efficient, long life transmission and axle oil from Shell’s Spirax S6 AXME range at SAE 75W-90, designed to provide ultimate protection to the latest heavy duty manual transmissions and axles; specially formulated with synthetic base oils and additive technology unique to Shell, gives improved lubrication of the drive train; extended oil drain capable and approved by several OEMs.
Line: Spirax
A fully synthetic, multipurpose, heavy-duty gear lubricant from Shell’s Spirax S6 AXME range at SAE 80W-140, specifically designed for heavy duty differentials that call for an API GL-5 type product.
Line: Spirax
A high performance off-highway transmission oil from Shell’s Spirax S6 CXME range at SAE 10W-40, designed to provide operators with trouble free operation and maximum reliability; meets the demanding requirements of modern transmission, differential gears, final drive, oil immersed brake, reduction gears and hydraulic systems fitted to heavy-duty off-highway equipment in all climates.
Line: Spirax
A synthetic heavy-duty transmission fluid from Shell’s Spirax S6 GME range (previous name: Shell Spirax GSX 50) at SAE 50, specially formulated for extended drain and severe service applications; approved as a Roadranger® Genuine Lubricant for use in Eaton extended warranty transmission service; contains an effective anti-wear system along with corrosion and oxidation inhibitors that protect system components and help achieve longer transmission life.
Line: Spirax
A unique fuel-efficient, long-life gear oil from Shell’s Spirax S6 GXME range at SAE 75W-80, designed to give the ultimate in performance and protection to meet the requirements of current and future heavy duty gearboxes; specially formulated fully synthetic base oils plus a unique new additive technology give improved lubrication and longer life for equipment.
Line: Spirax
A high-performance SAE 10W-30 universal tractor transmission oil (UTTO) from Shell’s Spirax S6 TXME range, approved by major manufacturers and meeting the latest specifications.
Line: Tellus
The predecessor name for a product now positioned within the “Shell Tellus S2” range; an anti-wear industrial hydraulic oil at ISO VG 22, for a wide range of industrial and mobile hydraulic systems. This name is still in circulation among some distributors.
Line: Tellus
The predecessor name for a product now positioned within the “Shell Tellus S2” range; an anti-wear industrial hydraulic oil at ISO VG 32, for a wide range of industrial and mobile hydraulic systems. This name is still in circulation among some distributors.
Line: Tellus
The predecessor name for a product now positioned within the “Shell Tellus S2” range; an anti-wear industrial hydraulic oil at ISO VG 37, for a wide range of industrial and mobile hydraulic systems. This name is still in circulation among some distributors.
Line: Tellus
The predecessor name for a product now positioned within the “Shell Tellus S2” range; an anti-wear industrial hydraulic oil at ISO VG 46, for a wide range of industrial and mobile hydraulic systems. This name is still in circulation among some distributors.
Line: Tellus
The predecessor name for a product now positioned within the “Shell Tellus S2” range; an anti-wear industrial hydraulic oil at ISO VG 68, for a wide range of industrial and mobile hydraulic systems. This name is still in circulation among some distributors.
Line: Tellus
The predecessor name for a product now positioned within the “Shell Tellus S2” range; an anti-wear industrial hydraulic oil at ISO VG 100, for a wide range of industrial and mobile hydraulic systems. This name is still in circulation among some distributors.
Line: Tellus
The predecessor name for a product now positioned within the “Shell Tellus S2” range; an anti-wear industrial hydraulic oil at ISO VG 150, for a wide range of industrial and mobile hydraulic systems. This name is still in circulation among some distributors.
Line: Tellus
A zinc-free hydraulic fluid from Shell’s Tellus Arctic range (the predecessor name for the product now marketed as Shell Tellus S4 VX 32) at ISO VG 32, designed especially for use in outdoor equipment, like mining and forestry machinery, operating at very low temperatures.
Line: Tellus
A high-performance hydraulic oil from Shell’s Tellus EE range at ISO VG 22, specifically designed to improve the energy efficiency of the machinery in which it is used; contains a unique and patented additive technology that has demonstrated an average energy cost reduction of up to 8% in laboratory tests and field trials.
Line: Tellus
A high-performance hydraulic oil from Shell’s Tellus EE range at ISO VG 32, specifically designed to improve the energy efficiency of the machinery in which it is used; contains a unique and patented additive technology that has demonstrated an average energy cost reduction of up to 8% in laboratory tests and field trials.
Line: Tellus
A high-performance hydraulic oil from Shell’s Tellus EE range at ISO VG 46, specifically designed to improve the energy efficiency of the machinery in which it is used; contains a unique and patented additive technology that has demonstrated an average energy cost reduction of up to 8% in laboratory tests and field trials.
Line: Tellus
A high-performance hydraulic oil from Shell’s Tellus EE range at ISO VG 68, specifically designed to improve the energy efficiency of the machinery in which it is used; contains a unique and patented additive technology that has demonstrated an average energy cost reduction of up to 8% in laboratory tests and field trials.
Line: Tellus
An anti-wear industrial hydraulic oil from Shell’s Tellus S range at ISO VG 22, approved by Denison Hydraulics, Eaton (Vickers), Cincinnati Machine and many other equipment manufacturers; meets ISO 11158, DIN 51524-3 and ASTM D6158 standards.
Line: Tellus
An anti-wear industrial hydraulic oil from Shell’s Tellus S range at ISO VG 32, approved by Denison Hydraulics, Eaton (Vickers), Cincinnati Machine and many other equipment manufacturers; meets ISO 11158, DIN 51524-3 and ASTM D6158 standards.
Line: Tellus
An anti-wear industrial hydraulic oil from Shell’s Tellus S range at ISO VG 46, approved by Denison Hydraulics, Eaton (Vickers), Cincinnati Machine and many other equipment manufacturers; meets ISO 11158, DIN 51524-3 and ASTM D6158 standards.
Line: Tellus
An anti-wear industrial hydraulic oil from Shell’s Tellus S range at ISO VG 100, approved by Denison Hydraulics, Eaton (Vickers), Cincinnati Machine and many other equipment manufacturers; meets ISO 11158, DIN 51524-3 and ASTM D6158 standards.
Line: Tellus
An anti-wear industrial hydraulic oil from Shell’s Tellus S range at ISO VG 68, approved by Denison Hydraulics, Eaton (Vickers), Cincinnati Machine and many other equipment manufacturers; meets ISO 11158, DIN 51524-3 and ASTM D6158 standards.
Line: Tellus
A quality anti-wear hydraulic fluid from Shell’s Tellus S1 M range (previous name: Shell Hydrau HM) at ISO VG 32, providing cost effective and reliable protection and good performance for most industrial applications under normal operating conditions; suitable for applications under mild or normal conditions where temperature changes and filtration requirements are moderate.
Line: Tellus
A quality anti-wear hydraulic fluid from Shell’s Tellus S1 M range (previous name: Shell Hydrau HM) at ISO VG 46, providing cost effective and reliable protection and good performance for most industrial applications under normal operating conditions; suitable for applications under mild or normal conditions where temperature changes and filtration requirements are moderate.
Line: Tellus
A quality anti-wear hydraulic fluid from Shell’s Tellus S1 M range (previous name: Shell Hydrau HM) at ISO VG 68, providing cost effective and reliable protection and good performance for most industrial applications under normal operating conditions; suitable for applications under mild or normal conditions where temperature changes and filtration requirements are moderate.
Line: Tellus
A high performance hydraulic fluid from Shell’s Tellus S2 M range (previous name: Shell Tellus Oils) at ISO VG 22, using Shell’s unique patented technology to provide outstanding protection and performance in most manufacturing and many mobile equipment operations; resists breakdown under heat or mechanical stress and helps prevent damaging deposit formation.
Line: Tellus
A high performance hydraulic fluid from Shell’s Tellus S2 M range (previous name: Shell Tellus Oils) at ISO VG 32, using Shell’s unique patented technology to provide outstanding protection and performance in most manufacturing and many mobile equipment operations; resists breakdown under heat or mechanical stress and helps prevent damaging deposit formation.
Line: Tellus
A high performance hydraulic fluid from Shell’s Tellus S2 M range (previous name: Shell Tellus Oils) at ISO VG 100, using Shell’s unique patented technology to provide outstanding protection and performance in most manufacturing and many mobile equipment operations; resists breakdown under heat or mechanical stress and helps prevent damaging deposit formation.
Line: Tellus
A high performance detergent-based hydraulic fluid from Shell’s Tellus S2 VA range at ISO VG 46, designed for use where emulsifiable fluids are preferred and water tolerance is required; meets DIN 51502, ISO 6743/4, ISO 11158 and ASTM 6158-05 standards.
Line: Tellus
A high-performance hydraulic fluid from Shell’s Tellus S2 VX range at ISO VG 15, based on Group II base oils that provide outstanding protection and performance across a wide range of temperatures; resists breakdown under heat or mechanical stress and is ideally suited to most mobile equipment and other applications subjected to a wider range of ambient or operating temperatures.
Line: Tellus
A high-performance hydraulic fluid from Shell’s Tellus S2 VX range at ISO VG 22, based on Group II base oils that provide outstanding protection and performance across a wide range of temperatures; resists breakdown under heat or mechanical stress and is ideally suited to most mobile equipment and other applications subjected to a wider range of ambient or operating temperatures.
Line: Tellus
A high-performance hydraulic fluid from Shell’s Tellus S2 VX range at ISO VG 32, based on Group II base oils that provide outstanding protection and performance across a wide range of temperatures; resists breakdown under heat or mechanical stress and is ideally suited to most mobile equipment and other applications subjected to a wider range of ambient or operating temperatures.
Line: Tellus
A high-performance hydraulic fluid from Shell’s Tellus S2 VX range at ISO VG 46, based on Group II base oils that provide outstanding protection and performance across a wide range of temperatures; resists breakdown under heat or mechanical stress and is ideally suited to most mobile equipment and other applications subjected to a wider range of ambient or operating temperatures.
Line: Tellus
A high-performance hydraulic fluid from Shell’s Tellus S2 VX range at ISO VG 68, based on Group II base oils that provide outstanding protection and performance across a wide range of temperatures; resists breakdown under heat or mechanical stress and is ideally suited to most mobile equipment and other applications subjected to a wider range of ambient or operating temperatures.
Line: Tellus
A high-performance hydraulic fluid from Shell’s Tellus S2 VX range at ISO VG 100, based on Group II base oils that provide outstanding protection and performance across a wide range of temperatures; resists breakdown under heat or mechanical stress and is ideally suited to most mobile equipment and other applications subjected to a wider range of ambient or operating temperatures.
Line: Tellus
An ashless industrial hydraulic oil from Shell’s Tellus S3 M range at ISO VG 22, offering long life and improved protection for industrial applications; approved by Denison Hydraulics, Eaton (Vickers), Cincinnati Machine and many other equipment manufacturers; meets ISO 11158, DIN 51524-3 and ASTM D6158 standards.
Line: Tellus
An ashless industrial hydraulic oil from Shell’s Tellus S3 M range at ISO VG 32, offering long life and improved protection for industrial applications; approved by Denison Hydraulics, Eaton (Vickers), Cincinnati Machine and many other equipment manufacturers; meets ISO 11158, DIN 51524-3 and ASTM D6158 standards.
Line: Tellus
An ashless industrial hydraulic oil from Shell’s Tellus S3 M range at ISO VG 46, offering long life and improved protection for industrial applications; approved by Denison Hydraulics, Eaton (Vickers), Cincinnati Machine and many other equipment manufacturers; meets ISO 11158, DIN 51524-3 and ASTM D6158 standards.
Line: Tellus
An ashless industrial hydraulic oil from Shell’s Tellus S3 M range at ISO VG 68, offering long life and improved protection for industrial applications; approved by Denison Hydraulics, Eaton (Vickers), Cincinnati Machine and many other equipment manufacturers; meets ISO 11158, DIN 51524-3 and ASTM D6158 standards.
Line: Tellus
An ashless industrial hydraulic oil from Shell’s Tellus S3 M range at ISO VG 100, offering long life and improved protection for industrial applications; approved by Denison Hydraulics, Eaton (Vickers), Cincinnati Machine and many other equipment manufacturers; meets ISO 11158, DIN 51524-3 and ASTM D6158 standards.
Line: Tellus
A hydraulic fluid using exclusive ashless technology from Shell’s Tellus S3 V range at ISO VG 32, coupled with highly shear-stable viscosity modifiers; gives excellent viscosity control and protection under severe mechanical, thermal and chemical stresses across a wide range of temperatures, providing outstanding protection and performance in most mobile equipment and other applications.
Line: Tellus
A hydraulic fluid using exclusive ashless technology from Shell’s Tellus S3 V range at ISO VG 46, coupled with highly shear-stable viscosity modifiers; gives excellent viscosity control and protection under severe mechanical, thermal and chemical stresses across a wide range of temperatures, providing outstanding protection and performance in most mobile equipment and other applications.
Line: Tellus
A hydraulic fluid using exclusive ashless technology from Shell’s Tellus S3 V range at ISO VG 68, coupled with highly shear-stable viscosity modifiers; gives excellent viscosity control and protection under severe mechanical, thermal and chemical stresses across a wide range of temperatures, providing outstanding protection and performance in most mobile equipment and other applications.
Line: Tellus
A synthetic, ashless hydraulic oil from Shell’s Tellus S4 ME range at ISO VG 22, offering extra long life and energy saving; approved by Denison Hydraulics, Cincinnati Machine, Eaton (Vickers), Bosch Rexroth and many other equipment manufacturers; meets ASTM D6158, ISO 11158 and DIN 51524-2 standards.
Line: Tellus
A synthetic, ashless hydraulic oil from Shell’s Tellus S4 ME range at ISO VG 32, offering extra long life and energy saving; approved by Denison Hydraulics, Cincinnati Machine, Eaton (Vickers), Bosch Rexroth and many other equipment manufacturers; meets ASTM D6158, ISO 11158 and DIN 51524-2 standards.
Line: Tellus
A synthetic, ashless hydraulic oil from Shell’s Tellus S4 ME range at ISO VG 46, offering extra long life and energy saving; approved by Denison Hydraulics, Cincinnati Machine, Eaton (Vickers), Bosch Rexroth and many other equipment manufacturers; meets ASTM D6158, ISO 11158 and DIN 51524-2 standards.
Line: Tellus
A synthetic, ashless hydraulic oil from Shell’s Tellus S4 ME range at ISO VG 68, offering extra long life and energy saving; approved by Denison Hydraulics, Cincinnati Machine, Eaton (Vickers), Bosch Rexroth and many other equipment manufacturers; meets ASTM D6158, ISO 11158 and DIN 51524-2 standards.
Line: Tellus
An advanced hydraulic fluid technology from Shell’s Tellus S4 VX range (previous name: Shell Tellus Arctic) at ISO VG 32, designed for use in applications subjected to extremely low ambient temperatures such as arctic or exposed areas; approved by Komatsu Mining, Komatsu and DIETZ automation (servo valve and proportional valve test equipment).
Line: Tellus
A very high viscosity index hydraulic oil from Shell’s Tellus STX range (the predecessor name for the product now marketed as Shell Tellus S3 V) at ISO VG 32, with a viscosity index of 162; approved by Cincinnati, Denison and Eaton (Vickers), meeting the Swedish Standard SS 15 54 34 AM.
Line: Tellus
A very high viscosity index hydraulic oil from Shell’s Tellus STX range (the predecessor name for the product now marketed as Shell Tellus S3 V) at ISO VG 46, with a viscosity index of 162; approved by Cincinnati, Denison and Eaton (Vickers), meeting the Swedish Standard SS 15 54 34 AM.
Line: Tellus
A very high viscosity index hydraulic oil from Shell’s Tellus STX range (the predecessor name for the product now marketed as Shell Tellus S3 V) at ISO VG 68, with a viscosity index of 162; approved by Cincinnati, Denison and Eaton (Vickers), meeting the Swedish Standard SS 15 54 34 AM.
Line: Tellus
An anti-wear hydraulic oil from Shell’s Tellus Oils T range at ISO VG 15, approved by Cincinnati (P-68/P-70/P-69), Denison (HF-0/HF-1/HF-2) and Eaton (Vickers) (M-2950 S/I-286 S); meets Swedish Standard SS 15 54 34 AM, ISO 11158 and AFNOR NF-E 48-603; good water separation properties (demulsibility) that resist the formation of water-in-oil emulsions.
Line: Tellus
An anti-wear hydraulic oil from Shell’s Tellus Oils T range at ISO VG 22, approved by Cincinnati (P-68/P-70/P-69), Denison (HF-0/HF-1/HF-2) and Eaton (Vickers) (M-2950 S/I-286 S); meets Swedish Standard SS 15 54 34 AM, ISO 11158 and AFNOR NF-E 48-603; good water separation properties (demulsibility) that resist the formation of water-in-oil emulsions.
Line: Tellus
An anti-wear hydraulic oil from Shell’s Tellus Oils T range at ISO VG 32, approved by Cincinnati (P-68/P-70/P-69), Denison (HF-0/HF-1/HF-2) and Eaton (Vickers) (M-2950 S/I-286 S); meets Swedish Standard SS 15 54 34 AM, ISO 11158 and AFNOR NF-E 48-603; good water separation properties (demulsibility) that resist the formation of water-in-oil emulsions.
Line: Tellus
An anti-wear hydraulic oil from Shell’s Tellus Oils T range at ISO VG 37, approved by Cincinnati (P-68/P-70/P-69), Denison (HF-0/HF-1/HF-2) and Eaton (Vickers) (M-2950 S/I-286 S); meets Swedish Standard SS 15 54 34 AM, ISO 11158 and AFNOR NF-E 48-603; good water separation properties (demulsibility) that resist the formation of water-in-oil emulsions.
Line: Tellus
An anti-wear hydraulic oil from Shell’s Tellus Oils T range at ISO VG 46, approved by Cincinnati (P-68/P-70/P-69), Denison (HF-0/HF-1/HF-2) and Eaton (Vickers) (M-2950 S/I-286 S); meets Swedish Standard SS 15 54 34 AM, ISO 11158 and AFNOR NF-E 48-603; good water separation properties (demulsibility) that resist the formation of water-in-oil emulsions.
Line: Tellus
An anti-wear hydraulic oil from Shell’s Tellus Oils T range at ISO VG 68, approved by Cincinnati (P-68/P-70/P-69), Denison (HF-0/HF-1/HF-2) and Eaton (Vickers) (M-2950 S/I-286 S); meets Swedish Standard SS 15 54 34 AM, ISO 11158 and AFNOR NF-E 48-603; good water separation properties (demulsibility) that resist the formation of water-in-oil emulsions.
Line: Tellus
An anti-wear hydraulic oil from Shell’s Tellus Oils T range at ISO VG 100, approved by Cincinnati (P-68/P-70/P-69), Denison (HF-0/HF-1/HF-2) and Eaton (Vickers) (M-2950 S/I-286 S); meets Swedish Standard SS 15 54 34 AM, ISO 11158 and AFNOR NF-E 48-603; good water separation properties (demulsibility) that resist the formation of water-in-oil emulsions.
Line: Tellus
A high detergency hydraulic oil from Shell’s Tellus TD range at ISO VG 68; part of Shell’s official Tellus hierarchy, which also includes plain Tellus, Tellus S, Tellus T, Tellus TX (extra-low-wear) and Tellus DO (premium detergent).
Line: Tellus
A premium extra-low-wear hydraulic oil from Shell’s Tellus TX range at ISO VG 15, viscosity index 160; a step up from standard Tellus T with an enhanced ZnDTP-based additive package for extreme-pressure (EP) performance and class-leading shear stability.
Line: Tellus
A premium extra-low-wear hydraulic oil from Shell’s Tellus TX range at ISO VG 22, viscosity index 160; a step up from standard Tellus T with an enhanced ZnDTP-based additive package for extreme-pressure (EP) performance and class-leading shear stability.
Line: Tellus
A premium extra-low-wear hydraulic oil from Shell’s Tellus TX range at ISO VG 32, viscosity index 160; a step up from standard Tellus T with an enhanced ZnDTP-based additive package for extreme-pressure (EP) performance and class-leading shear stability.
Line: Tellus
A premium extra-low-wear hydraulic oil from Shell’s Tellus TX range at ISO VG 46, viscosity index 160; a step up from standard Tellus T with an enhanced ZnDTP-based additive package for extreme-pressure (EP) performance and class-leading shear stability.
Line: Tellus
A premium extra-low-wear hydraulic oil from Shell’s Tellus TX range at ISO VG 68, viscosity index 160; a step up from standard Tellus T with an enhanced ZnDTP-based additive package for extreme-pressure (EP) performance and class-leading shear stability.
Line: Tellus
A premium extra-low-wear hydraulic oil from Shell’s Tellus TX range at ISO VG 100, viscosity index 160; a step up from standard Tellus T with an enhanced ZnDTP-based additive package for extreme-pressure (EP) performance and class-leading shear stability.
Line: Tellus
The predecessor name for a product now positioned within the “Shell Tellus S2 MA” range; a next-generation, premium high-detergent hydraulic oil from Shell’s Tellus DO range at ISO VG 10, for use where emulsifiable fluids are preferred, using proven ashless anti-wear technology to provide reliable performance in applications with contamination by aqueous fluids.
Line: Tellus
The predecessor name for a product now positioned within the “Shell Tellus S2 MA” range; a next-generation, premium high-detergent hydraulic oil from Shell’s Tellus DO range at ISO VG 22, for use where emulsifiable fluids are preferred, using proven ashless anti-wear technology to provide reliable performance in applications with contamination by aqueous fluids.
Line: Tellus
The predecessor name for a product now positioned within the “Shell Tellus S2 MA” range; a next-generation, premium high-detergent hydraulic oil from Shell’s Tellus DO range at ISO VG 32, for use where emulsifiable fluids are preferred, using proven ashless anti-wear technology to provide reliable performance in applications with contamination by aqueous fluids.
Line: Tellus
The predecessor name for a product now positioned within the “Shell Tellus S2 MA” range; a next-generation, premium high-detergent hydraulic oil from Shell’s Tellus DO range at ISO VG 46, for use where emulsifiable fluids are preferred, using proven ashless anti-wear technology to provide reliable performance in applications with contamination by aqueous fluids.
Line: Tellus
The predecessor name for a product now positioned within the “Shell Tellus S2 MA” range; a next-generation, premium high-detergent hydraulic oil from Shell’s Tellus DO range at ISO VG 68, for use where emulsifiable fluids are preferred, using proven ashless anti-wear technology to provide reliable performance in applications with contamination by aqueous fluids.
Line: Tellus
An anti-wear hydraulic and circulating system oil at ISO VG 100 from Shell’s Tellus R range, containing a small percentage of triphenyl phosphate as part of its additive package; part of a family of Shell fluids formulated for fire resistance in hydraulic and circulating applications.
Line: Tellus
An anti-wear hydraulic and circulating system oil at ISO VG 22 from Shell’s Tellus R range, containing a small percentage of triphenyl phosphate as part of its additive package; part of a family of Shell fluids formulated for fire resistance in hydraulic and circulating applications.
Line: Tellus
An anti-wear hydraulic and circulating system oil at ISO VG 32 from Shell’s Tellus R range, containing a small percentage of triphenyl phosphate as part of its additive package; part of a family of Shell fluids formulated for fire resistance in hydraulic and circulating applications.
Line: Tellus
An anti-wear hydraulic and circulating system oil at ISO VG 46 from Shell’s Tellus R range, containing a small percentage of triphenyl phosphate as part of its additive package; part of a family of Shell fluids formulated for fire resistance in hydraulic and circulating applications.
Line: Tellus
An anti-wear hydraulic and circulating system oil at ISO VG 68 from Shell’s Tellus R range, containing a small percentage of triphenyl phosphate as part of its additive package; part of a family of Shell fluids formulated for fire resistance in hydraulic and circulating applications.
Line: Tonna
The predecessor name for a product now positioned within the “Shell Tonna S3 M” range; a machine tool slideway oil at ISO VG 32, for the lubrication of machine tool slides, tables and feed mechanisms. This name is still in circulation among some distributors.
Line: Tonna
The predecessor name for a product now positioned within the “Shell Tonna S3 M” range; a machine tool slideway oil at ISO VG 68, for the lubrication of machine tool slides, tables and feed mechanisms. This name is still in circulation among some distributors.
Line: Tonna
The predecessor name for a product now positioned within the “Shell Tonna S3 M” range; a machine tool slideway oil at ISO VG 220, for the lubrication of machine tool slides, tables and feed mechanisms. This name is still in circulation among some distributors.
Line: Tonna
A machine tool slideway oil from Shell’s Tonna S2 M range at ISO VG 32, formulated to help protect slideways, gears, bearings and hydraulic system components; reaches the maximum failure load stage of 12 in the FZG load-carrying capacity test (a requirement by standard for ISO 68), indicating enhanced resistance to scuffing, and provides rapid separation from water-miscible cutting fluids.
Line: Tonna
A machine tool slideway oil from Shell’s Tonna S2 M range at ISO VG 46, formulated to help protect slideways, gears, bearings and hydraulic system components; reaches the maximum failure load stage of 12 in the FZG load-carrying capacity test (a requirement by standard for ISO 68), indicating enhanced resistance to scuffing, and provides rapid separation from water-miscible cutting fluids.
Line: Tonna
A machine tool slideway oil from Shell’s Tonna S2 M range at ISO VG 68, formulated to help protect slideways, gears, bearings and hydraulic system components; reaches the maximum failure load stage of 12 in the FZG load-carrying capacity test (a requirement by standard for ISO 68), indicating enhanced resistance to scuffing, and provides rapid separation from water-miscible cutting fluids.
Line: Tonna
A machine tool slideway oil from Shell’s Tonna S2 M range at ISO VG 100, formulated to help protect slideways, gears, bearings and hydraulic system components; reaches the maximum failure load stage of 12 in the FZG load-carrying capacity test (a requirement by standard for ISO 68), indicating enhanced resistance to scuffing, and provides rapid separation from water-miscible cutting fluids.
Line: Tonna
A machine tool slideway oil from Shell’s Tonna S2 M range at ISO VG 150, formulated to help protect slideways, gears, bearings and hydraulic system components; reaches the maximum failure load stage of 12 in the FZG load-carrying capacity test (a requirement by standard for ISO 68), indicating enhanced resistance to scuffing, and provides rapid separation from water-miscible cutting fluids.
Line: Tonna
A machine tool slideway oil from Shell’s Tonna S2 M range at ISO VG 220, formulated to help protect slideways, gears, bearings and hydraulic system components; reaches the maximum failure load stage of 12 in the FZG load-carrying capacity test (a requirement by standard for ISO 68), indicating enhanced resistance to scuffing, and provides rapid separation from water-miscible cutting fluids.
Line: Tonna
A machine tool slideway oil from Shell’s Tonna S2 MX range at ISO VG 32, specially designed for the lubrication of machine tool slides, tables and feed mechanisms; enhanced tackiness and stick-slip characteristics combine to offer superior frictional performance on slideways, especially recommended where high adherence is required and where high exposure to soluble cutting fluids exists.
Line: Tonna
A machine tool slideway oil from Shell’s Tonna S2 MX range at ISO VG 68, specially designed for the lubrication of machine tool slides, tables and feed mechanisms; enhanced tackiness and stick-slip characteristics combine to offer superior frictional performance on slideways, especially recommended where high adherence is required and where high exposure to soluble cutting fluids exists.
Line: Tonna
A machine tool slideway oil from Shell’s Tonna S2 MX range at ISO VG 220, specially designed for the lubrication of machine tool slides, tables and feed mechanisms; enhanced tackiness and stick-slip characteristics combine to offer superior frictional performance on slideways, especially recommended where high adherence is required and where high exposure to soluble cutting fluids exists.
Line: Tonna
A premium machine tool slideway oil from Shell’s Tonna S3 M range (previous name: Shell Tonna S) at ISO VG 32, specially designed for the lubrication of machine tool slides, tables and feed mechanisms; especially recommended where high precision and low-speed machines are used as well as in combined lubrication systems, and also suitable for gear and headstock lubrication.
Line: Tonna
A premium machine tool slideway oil from Shell’s Tonna S3 M range (previous name: Shell Tonna S) at ISO VG 68, specially designed for the lubrication of machine tool slides, tables and feed mechanisms; especially recommended where high precision and low-speed machines are used as well as in combined lubrication systems, and also suitable for gear and headstock lubrication.
Line: Tonna
A premium machine tool slideway oil from Shell’s Tonna S3 M range (previous name: Shell Tonna S) at ISO VG 220, specially designed for the lubrication of machine tool slides, tables and feed mechanisms; especially recommended where high precision and low-speed machines are used as well as in combined lubrication systems, and also suitable for gear and headstock lubrication.
Line: Tonna
A machine tool slideway oil with extra machining accuracy from Shell’s Tonna S4 M range at ISO VG 32, specially designed for the lubrication of machine tool slides, tables and feed mechanisms; enhanced tackiness and stick-slip characteristics combine to offer outstanding frictional performance on slideways, a tier above Tonna S3 M for applications requiring the highest levels of precision.
Line: Tonna
A machine tool slideway oil with extra machining accuracy from Shell’s Tonna S4 M range at ISO VG 68, specially designed for the lubrication of machine tool slides, tables and feed mechanisms; enhanced tackiness and stick-slip characteristics combine to offer outstanding frictional performance on slideways, a tier above Tonna S3 M for applications requiring the highest levels of precision.
Line: Tonna
A machine tool slideway oil with extra machining accuracy from Shell’s Tonna S4 M range at ISO VG 220, specially designed for the lubrication of machine tool slides, tables and feed mechanisms; enhanced tackiness and stick-slip characteristics combine to offer outstanding frictional performance on slideways, a tier above Tonna S3 M for applications requiring the highest levels of precision.
Line: Tonna
A machine tool slideway oil from Shell’s Tonna T range at ISO VG 32, developed for use on a wide range of materials used for machine tool slideway surfaces including cast iron and synthetic materials; can also be used in hydraulic and gearbox systems, although Shell Tonna S oils are generally preferable for such applications. The lower viscosity grades (32 or 68) are intended for horizontal slide lubrication, while ISO VG 220 is intended for vertical slides.
Line: Tonna
A machine tool slideway oil from Shell’s Tonna T range at ISO VG 68, developed for use on a wide range of materials used for machine tool slideway surfaces including cast iron and synthetic materials; can also be used in hydraulic and gearbox systems, although Shell Tonna S oils are generally preferable for such applications. The lower viscosity grades (32 or 68) are intended for horizontal slide lubrication, while ISO VG 220 is intended for vertical slides.
Line: Tonna
A machine tool slideway oil from Shell’s Tonna T range at ISO VG 220, developed for use on a wide range of materials used for machine tool slideway surfaces including cast iron and synthetic materials; can also be used in hydraulic and gearbox systems, although Shell Tonna S oils are generally preferable for such applications. The lower viscosity grades (32 or 68) are intended for horizontal slide lubrication, while ISO VG 220 is intended for vertical slides.
Line: Turbo
Shell’s premium, industrial, heavy-duty gas turbine oil, the Turbo GT range, at ISO VG 32; an advanced synthetic oil that offers the highest performance in the Shell range, for heavy-duty gas turbines and turbocompressors; based on Group III base oils, with up to 50% better oxidation stability compared with the industry standard.
Line: Turbo
Shell’s premium, industrial, heavy-duty gas turbine oil, the Turbo GT range, at ISO VG 46; an advanced synthetic oil that offers the highest performance in the Shell range, for heavy-duty gas turbines and turbocompressors; based on Group III base oils, with up to 50% better oxidation stability compared with the industry standard.
Line: Turbo
A turbine oil from Shell’s Turbo CC range at ISO VG 32, a tier offering extra protection and extra long service life for industrial turbines; part of Shell’s comprehensive Turbo turbine oil portfolio.
Line: Turbo
A turbine oil from Shell’s Turbo CC range at ISO VG 46, a tier offering extra protection and extra long service life for industrial turbines; part of Shell’s comprehensive Turbo turbine oil portfolio.
Line: Turbo
A turbine oil from Shell’s Turbo CC range at ISO VG 68, a tier offering extra protection and extra long service life for industrial turbines; part of Shell’s comprehensive Turbo turbine oil portfolio.
Line: Turbo
A high quality industrial steam and gas turbine oil from Shell’s Turbo Oil T range at ISO VG 32; Shell Turbo Oils T have long been regarded as the industry standard turbine oil, formulated from high quality hydrotreated base oils and a combination of zinc-free additives that provide excellent oxidative stability, protection against rust and corrosion, low foaming and excellent demulsibility; approved by manufacturers including GE, Siemens, MAN and Solar.
Line: Turbo
A high quality industrial steam and gas turbine oil from Shell’s Turbo Oil T range at ISO VG 46; Shell Turbo Oils T have long been regarded as the industry standard turbine oil, formulated from high quality hydrotreated base oils and a combination of zinc-free additives that provide excellent oxidative stability, protection against rust and corrosion, low foaming and excellent demulsibility; approved by manufacturers including GE, Siemens, MAN and Solar.
Line: Turbo
A high quality industrial steam and gas turbine oil from Shell’s Turbo Oil T range at ISO VG 68; Shell Turbo Oils T have long been regarded as the industry standard turbine oil, formulated from high quality hydrotreated base oils and a combination of zinc-free additives that provide excellent oxidative stability, protection against rust and corrosion, low foaming and excellent demulsibility; approved by manufacturers including GE, Siemens, MAN and Solar.
Line: Turbo
A high quality industrial steam and gas turbine oil from Shell’s Turbo Oil T range at ISO VG 100; Shell Turbo Oils T have long been regarded as the industry standard turbine oil, formulated from high quality hydrotreated base oils and a combination of zinc-free additives that provide excellent oxidative stability, protection against rust and corrosion, low foaming and excellent demulsibility; approved by manufacturers including GE, Siemens, MAN and Solar.
Line: Turbo
A premium industrial steam, gas and combined cycle turbine lubricant for geared turbines from Shell’s Turbo S4 GX range at ISO VG 32, based on Gas-to-Liquid (GTL) technology; developed to meet the demands of the latest high efficiency turbine systems, designed to offer outstanding, long term performance under the most severe operating conditions, and minimises wear, deposit and sludge formation even under cyclic peak loading conditions.
Line: Turbo
A premium industrial steam, gas and combined cycle turbine lubricant for geared turbines from Shell’s Turbo S4 GX range at ISO VG 46, based on Gas-to-Liquid (GTL) technology; developed to meet the demands of the latest high efficiency turbine systems, designed to offer outstanding, long term performance under the most severe operating conditions, and minimises wear, deposit and sludge formation even under cyclic peak loading conditions.
Line: Turbo
A self-extinguishing, phosphate ester based fire-resistant hydraulic fluid from Shell’s Turbo S5 DR range at ISO VG 46, developed for use in electro-hydraulic control (EHC) systems of steam and gas turbines as well as lubrication of the main bearings in steam and gas turbines, generators and cooling pumps; offers a high flash point, fire point and auto-ignition temperature to reduce potential fire hazards, good oxidation and hydrolytic stability, and rapid water separation.
Line: Corena
An advanced synthetic lubricant from Shell’s Corena AP range at ISO VG 68, for reciprocating compressors; based on high-quality ester fluids.
Line: Corena
An advanced synthetic lubricant from Shell’s Corena AP range at ISO VG 100, for reciprocating compressors; based on high-quality ester fluids.
Line: Corena
An advanced synthetic lubricant from Shell’s Corena AP range at ISO VG 150, for reciprocating compressors; based on high-quality ester fluids.
Line: Corena
The predecessor name for a product now positioned within the “Shell Corena S4 R” range; an advanced synthetic rotary air compressor oil at ISO VG 32, designed for compressors running at pressures over 25 bar and discharge temperatures in excess of 100°C with oil maintenance intervals of up to 12,000 hours. This name is still in circulation among some distributors.
Line: Corena
The predecessor name for a product now positioned within the “Shell Corena S4 R” range; an advanced synthetic rotary air compressor oil at ISO VG 46, designed for compressors running at pressures over 25 bar and discharge temperatures in excess of 100°C with oil maintenance intervals of up to 12,000 hours. This name is still in circulation among some distributors.
Line: Corena
The predecessor name for a product now positioned within the “Shell Corena S4 R” range; an advanced synthetic rotary air compressor oil at ISO VG 68, designed for compressors running at pressures over 25 bar and discharge temperatures in excess of 100°C with oil maintenance intervals of up to 12,000 hours. This name is still in circulation among some distributors.
Line: Corena
The predecessor name for a product now positioned within the “Shell Corena S2 R” range; a detergent-based rotary air compressor oil, for the reliable lubrication of rotary sliding vane and screw air compressors. This name is still in circulation among some distributors.
Line: Corena
The predecessor name for a product now positioned within the “Shell Corena S2 R” range; a detergent-based rotary air compressor oil at ISO VG 32, for the reliable lubrication of rotary sliding vane and screw air compressors operating at up to 15 bar and 100°C, with oil maintenance intervals of up to 4,000 hours. This name is still in circulation among some distributors.
Line: Corena
The predecessor name for a product now positioned within the “Shell Corena S2 R” range; a detergent-based rotary air compressor oil at ISO VG 46, for the reliable lubrication of rotary sliding vane and screw air compressors operating at up to 15 bar and 100°C, with oil maintenance intervals of up to 4,000 hours. This name is still in circulation among some distributors.
Line: Corena
The predecessor name for a product now positioned within the “Shell Corena S2 R” range; a detergent-based rotary air compressor oil at ISO VG 68, for the reliable lubrication of rotary sliding vane and screw air compressors operating at up to 15 bar and 100°C, with oil maintenance intervals of up to 4,000 hours. This name is still in circulation among some distributors.
Line: Corena
The predecessor name for a product now positioned within the “Shell Corena S2 R” range; a detergent-based rotary air compressor oil at ISO VG 100, for the reliable lubrication of rotary sliding vane and screw air compressors operating at up to 15 bar and 100°C, with oil maintenance intervals of up to 4,000 hours. This name is still in circulation among some distributors.
Line: Corena
The predecessor name for a product now positioned within the “Shell Corena S2 R” range; a detergent-based rotary air compressor oil at ISO VG 150, for the reliable lubrication of rotary sliding vane and screw air compressors operating at up to 15 bar and 100°C, with oil maintenance intervals of up to 4,000 hours. This name is still in circulation among some distributors.
Line: Corena
A fully synthetic lubricant from Shell’s Corena DE range at ISO VG 100, designed for the lubrication of reciprocating compressors; formulated using high quality diester base fluids in combination with high quality additives, intended for the lubrication of both the crankcase and cylinders of reciprocating air compressors where fluids of this viscosity are recommended.
Line: Corena
A fully synthetic lubricant from Shell’s Corena DE range at ISO VG 150, designed for the lubrication of reciprocating compressors; formulated using high quality diester base fluids in combination with high quality additives, intended for the lubrication of both the crankcase and cylinders of reciprocating air compressors where fluids of this viscosity are recommended.
Line: Corena
A rotary screw air compressor oil from Shell’s Corena E15 range at ISO VG 46, manufactured from a special high pressure hydrotreated base oil to enhance demulsibility performance, extended drain intervals, and anti-wear properties.
Line: Corena
A polyglycol synthetic lubricant from Shell’s Corena PGE range at ISO VG 32, for air compressors in applications that require polyalkylene glycol base fluid technology.
Line: Corena
A polyglycol synthetic lubricant from Shell’s Corena PGE range at ISO VG 68, for air compressors in applications that require polyalkylene glycol base fluid technology.
Line: Corena
The predecessor name for a product now positioned within the “Shell Gas Compressor Oil S3” range; a high quality blend at ISO VG 220, designed for the total loss lubrication of cylinders of high pressure reciprocating compressors used in severe, wet and/or sour, natural gas service. This name is still in circulation among some distributors.
Line: Corena
The predecessor name for a product now positioned within the “Shell Gas Compressor Oil S3” range; a high quality blend at ISO VG 460, designed for the total loss lubrication of cylinders of high pressure reciprocating compressors used in severe, wet and/or sour, natural gas service. This name is still in circulation among some distributors.
Line: Corena
The predecessor name for a product now positioned within the “Shell Corena S2 P” range; a high quality reciprocating air compressor oil at ISO VG 68, designed to deliver lubrication performance for high pressure reciprocating compressors running at up to 220°C discharge temperatures. This name is still in circulation among some distributors.
Line: Corena
The predecessor name for a product now positioned within the “Shell Corena S2 P” range; a high quality reciprocating air compressor oil at ISO VG 100, designed to deliver lubrication performance for high pressure reciprocating compressors running at up to 220°C discharge temperatures. This name is still in circulation among some distributors.
Line: Corena
The predecessor name for a product now positioned within the “Shell Corena S2 P” range; a high quality reciprocating air compressor oil at ISO VG 150, designed to deliver lubrication performance for high pressure reciprocating compressors running at up to 220°C discharge temperatures. This name is still in circulation among some distributors.
Line: Corena
The predecessor name for a product now positioned within the “Shell Corena S3 R” range; a premium rotary air compressor lubricant at ISO VG 32, designed to deliver high performance lubrication of rotary sliding vane and screw air compressors operating at up to 20 bar and 100°C, with oil maintenance intervals of up to 6,000 hours. This name is still in circulation among some distributors.
Line: Corena
The predecessor name for a product now positioned within the “Shell Corena S3 R” range; a premium rotary air compressor lubricant at ISO VG 46, designed to deliver high performance lubrication of rotary sliding vane and screw air compressors operating at up to 20 bar and 100°C, with oil maintenance intervals of up to 6,000 hours. This name is still in circulation among some distributors.
Line: Corena
The predecessor name for a product now positioned within the “Shell Corena S3 R” range; a premium rotary air compressor lubricant at ISO VG 68, designed to deliver high performance lubrication of rotary sliding vane and screw air compressors operating at up to 20 bar and 100°C, with oil maintenance intervals of up to 6,000 hours. This name is still in circulation among some distributors.
Line: Corena
The predecessor name for a product now positioned within the “Shell Corena S3 R” range; a premium rotary air compressor lubricant at ISO VG 100, designed to deliver high performance lubrication of rotary sliding vane and screw air compressors operating at up to 20 bar and 100°C, with oil maintenance intervals of up to 6,000 hours. This name is still in circulation among some distributors.
Line: Corena
The predecessor name for a product now positioned within the “Shell Corena S3 R” range; a premium rotary air compressor lubricant at ISO VG 150, designed to deliver high performance lubrication of rotary sliding vane and screw air compressors operating at up to 20 bar and 100°C, with oil maintenance intervals of up to 6,000 hours. This name is still in circulation among some distributors.
Line: Corena
A high quality reciprocating air compressor oil from Shell’s Corena S2 P range at ISO VG 100, designed to deliver the lubrication performance for high pressure reciprocating compressors; suitable for most reciprocating air compressors running at up to 220°C discharge temperatures, with long oil life, outstanding wear protection and good water separation.
Line: Corena
A high quality reciprocating air compressor oil from Shell’s Corena S2 P range at ISO VG 68, designed to deliver the lubrication performance for high pressure reciprocating compressors; suitable for most reciprocating air compressors running at up to 220°C discharge temperatures, with long oil life, outstanding wear protection and good water separation.
Line: Corena
A high quality reciprocating air compressor oil from Shell’s Corena S2 P range at ISO VG 150, designed to deliver the lubrication performance for high pressure reciprocating compressors; suitable for most reciprocating air compressors running at up to 220°C discharge temperatures, with long oil life, outstanding wear protection and good water separation.
Line: Corena
A detergent-based rotary air compressor oil from Shell’s Corena S2 R range, designed to deliver reliable lubrication of rotary sliding vane and screw air compressors operating at up to 15 bar and 100°C, with oil maintenance intervals of up to 4,000 hours; offers long life, outstanding wear protection, and maintains system efficiency through good air release and foaming prevention.
Line: Corena
A detergent-based rotary air compressor oil from Shell’s Corena S2 R range at ISO VG 46, designed to deliver reliable lubrication of rotary sliding vane and screw air compressors operating at up to 15 bar and 100°C, with oil maintenance intervals of up to 4,000 hours.
Line: Corena
A detergent-based rotary air compressor oil from Shell’s Corena S2 R range at ISO VG 68, designed to deliver reliable lubrication of rotary sliding vane and screw air compressors operating at up to 15 bar and 100°C, with oil maintenance intervals of up to 4,000 hours.
Line: Corena
A high quality air compressor oil from Shell’s Corena S2 RJ range, designed to deliver reliable lubrication of rotary screw air compressors; it uses an optimised non-detergent additive system to provide good protection and performance, particularly in Japanese compressor machinery where low sludge, good thermal-oxidation stability and high flash point are required; suitable for oil-flooded or oil-injected air compressors, particularly those from Japanese manufacturers.
Line: Corena
A premium quality air compressor oil from Shell’s Corena S3 R range (previous name: Shell Corena S) at ISO VG 32, designed to deliver high performance lubrication of rotary sliding vane and screw air compressors; uses an advanced additive system to provide excellent protection and performance for compressors running at up to 20 bar and 100°C, with oil maintenance intervals of up to 6,000 hours.
Line: Corena
A premium quality air compressor oil from Shell’s Corena S3 R range (previous name: Shell Corena S) at ISO VG 46, designed to deliver high performance lubrication of rotary sliding vane and screw air compressors; uses an advanced additive system to provide excellent protection and performance for compressors running at up to 20 bar and 100°C, with oil maintenance intervals of up to 6,000 hours.
Line: Corena
A premium quality air compressor oil from Shell’s Corena S3 R range (previous name: Shell Corena S) at ISO VG 68, designed to deliver high performance lubrication of rotary sliding vane and screw air compressors; uses an advanced additive system to provide excellent protection and performance for compressors running at up to 20 bar and 100°C, with oil maintenance intervals of up to 6,000 hours.
Line: Corena
A premium quality air compressor oil from Shell’s Corena S3 RJ range, a variant of the S3 R tier specifically optimised for compatibility with Japanese-built screw compressor machinery; suitable for oil-flooded or oil-injected screw compressors from Japanese manufacturers.
Line: Corena
A premium quality synthesized air compressor oil from Shell’s Corena S3 RX range at ISO VG 46, based on Shell’s advanced Gas-to-Liquids (GTL) base oil technology combined with an advanced performance additive system; designed to provide excellent protection and performance for compressors running with oil change intervals of 6,000 hours and up to 8,000 hours under certain conditions; exceptional air release and low foaming tendency, along with excellent water separation.
Line: Corena
A premium quality synthesized air compressor oil from Shell’s Corena S3 RX range at ISO VG 68, based on Shell’s advanced Gas-to-Liquids (GTL) base oil technology combined with an advanced performance additive system; designed to provide excellent protection and performance for compressors running with oil change intervals of 6,000 hours and up to 8,000 hours under certain conditions; exceptional air release and low foaming tendency, along with excellent water separation.
Line: Corena
An advanced synthetic lubricant from Shell’s Corena S4 P range at ISO VG 68, offering extra long life and improved efficiency for severe reciprocating compressor applications; its advanced additive system provides outstanding protection and stable performance for high-pressure piston air compressors.
Line: Corena
An advanced synthetic lubricant from Shell’s Corena S4 P range at ISO VG 100, offering extra long life and improved efficiency for severe reciprocating compressor applications; its advanced additive system provides outstanding protection and stable performance for high-pressure piston air compressors.
Line: Corena
An advanced synthetic rotary air compressor oil from Shell’s Corena S4 R range at ISO VG 32, designed to provide the highest performance lubrication for compressors operating at pressures over 25 bar and temperatures over 100°C; uses an advanced additive system to deliver exceptional wear protection, thermal and chemical stability, and oil life up to 12,000 hours; suitable for rotary vane and screw compressors, including those operating under severe conditions.
Line: Corena
An advanced synthetic rotary air compressor oil from Shell’s Corena S4 R range at ISO VG 46, designed to provide the highest performance lubrication for compressors operating at pressures over 25 bar and temperatures over 100°C; uses an advanced additive system to deliver exceptional wear protection, thermal and chemical stability, and oil life up to 12,000 hours; suitable for rotary vane and screw compressors, including those operating under severe conditions.
Line: Corena
An advanced synthetic rotary air compressor oil from Shell’s Corena S4 R range at ISO VG 68, designed to provide the highest performance lubrication for compressors operating at pressures over 25 bar and temperatures over 100°C; uses an advanced additive system to deliver exceptional wear protection, thermal and chemical stability, and oil life up to 12,000 hours; suitable for rotary vane and screw compressors, including those operating under severe conditions.
Line: Corena
A top tier synthetic lubricant based on polyalkylene glycol (PAG) and ester technology from Shell’s Corena S5 R range at ISO VG 32, designed for use in rotary screw air compressors; enables long oil drain intervals of up to 10,000 hours with varnish-free operation; rapid air release and low foaming properties, and good thermal conductivity making it an effective coolant.
Line: Corena
A top tier synthetic lubricant based on polyalkylene glycol (PAG) and ester technology from Shell’s Corena S5 R range at ISO VG 46, designed for use in rotary screw air compressors; enables long oil drain intervals of up to 10,000 hours with varnish-free operation; rapid air release and low foaming properties, and good thermal conductivity making it an effective coolant.
Line: Corena
A top tier synthetic lubricant based on polyalkylene glycol (PAG) and ester technology from Shell’s Corena S5 R range at ISO VG 68, designed for use in rotary screw air compressors; enables long oil drain intervals of up to 10,000 hours with varnish-free operation; rapid air release and low foaming properties, and good thermal conductivity making it an effective coolant.
No products found matching your selected filters.
General-purpose anti-wear hydraulic oil from Shell's Tellus range, widely used in industrial and mobile hydraulic systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A higher-viscosity grade from the same Tellus range, for hydraulic systems running at higher operating temperatures or heavier load.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
Industrial gear oil from Shell's Omala range, commonly used in enclosed industrial gearboxes under moderate to heavy load.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A synthetic industrial gear oil from the Omala range, positioned for gearboxes under heavy load or a wide temperature range.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
Reciprocating compressor oil from Shell's Corena range, commonly used in industrial air compressors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
Turbine oil from Shell's Turbo range, positioned for steam and gas turbine systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
Circulating oil from Shell's Morlina range, positioned for bearings and industrial circulating systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
Multi-purpose transmission fluid from Shell's Spirax range, commonly used in agricultural machinery and off-highway equipment.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
Heat transfer fluid from Shell's Thermia range, positioned for closed-loop industrial heating systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
Refrigeration compressor oil from Shell, positioned for industrial and commercial cooling systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A mineral heavy-duty diesel engine oil from Shell's Rimula range, positioned for older-technology diesel engines.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A multi-purpose heavy-duty diesel engine oil from Shell's Rimula range, commonly used across heavy-duty fleets under varying driving conditions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A fully synthetic diesel engine oil from Shell's Rimula range, positioned for extended drain intervals in Euro 4/5 engines without a particulate filter.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A low-ash, low-emission diesel engine oil from Shell's Rimula range, engineered for engines fitted with a diesel particulate filter (DPF).
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A fully synthetic passenger-car engine oil from Shell's Helix range, built on Shell's PurePlus gas-to-liquid base oil technology, for modern gasoline and diesel engines.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A fully synthetic engine oil from Shell's Helix range, positioned as a value-oriented alternative to Ultra for everyday driving.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A semi-synthetic engine oil from Shell's Helix range, suited to a wide variety of modern vehicles.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A mineral multigrade engine oil from Shell's Helix range, positioned for everyday driving under normal conditions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A marine trunk-piston engine oil from Shell's Argina range, positioned for medium-speed marine diesel engines running on heavy fuel oil.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A marine trunk-piston engine oil from Shell's Gadinia range, positioned for marine diesel engines running on distillate fuel.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A gas-engine oil from Shell's Mysella range, positioned for stationary and marine gas-fuelled generator engines.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A mineral electrical insulating oil from Shell's Diala range, offering good dielectric properties for transformers.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A GTL-based electrical insulating oil from Shell's Diala range, positioned for the latest generation of transformers requiring higher performance.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A readily biodegradable electrical insulating oil from Shell's Diala range, positioned for transformers in environmentally sensitive locations.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A biodegradable, ester-based fluid from Shell's Naturelle range, positioned for marine stern tube bearings and approved by major stern tube and seal manufacturers.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
Multi-purpose grease from Shell's Gadus range, commonly used in general-purpose industrial bearings.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A softer consistency from the same Gadus V220 range, suited to centralized lubrication systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A higher-performance grease from the Gadus S3 range, positioned for bearings under heavier load or higher speed.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-temperature grease from the Gadus S3 range, positioned for points near industrial heat sources.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced synthetic grease from the Gadus S5 range, positioned for demanding conditions and a wide temperature range.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A very high-temperature-resistant grease from the Gadus S5 range, positioned for high-heat industrial applications such as hot lines.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A rail-industry-specific grease from Shell, positioned for wheel flange and rail contact points.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An open-gear grease from Shell, positioned for large open gears such as those in mills and rotary kilns.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
Another variant from the Gadus S2 range with a lighter base oil, positioned for higher-speed bearings.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A lithium-complex grease from Shell's older Retinax range, still recognized in some markets.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A low-BN (25) marine cylinder oil from Shell's Alexia range (previously known as Alexia S3), formulated for two-stroke marine diesel engines running on very low-sulphur fuel (up to 0.1%), within Emission Control Areas, or on liquefied natural gas.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A mid-BN (40) marine cylinder oil from Shell's Alexia range, introduced fresh in the post-IMO 2020 portfolio with no prior product name, positioned for two-stroke engines running on 0.1% or 0.5% sulphur fuel.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for the product Shell now markets as "Alexia 70" \u2014 a BN 70 cylinder oil for low-speed crosshead marine diesel engines burning residual fuel with sulphur content up to 4.0% weight. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A BN 70 cylinder oil from Shell's Alexia range (previously known as Alexia 50), for low-speed two-stroke marine diesel engines burning heavy fuel oil with sulphur content up to 3.5%, including use alongside exhaust gas scrubbers.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-BN (100) cylinder oil from Shell's Alexia range (previously known as Alexia S6), designed to offer enhanced protection in low-speed two-stroke engines burning high-sulphur fuel oil or fitted with a scrubber.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The highest-BN product in Shell's Alexia portfolio (140), at SAE 60 viscosity, for two-stroke marine diesel engines burning high-sulphur heavy fuel oil with a scrubber, where the greatest degree of acid neutralisation is required.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A special BN 40 cylinder oil designed for improved piston running conditions in low-speed crosshead engines burning low-sulphur fuel (below 2% weight); its reduced ash level helped avoid excessive piston top-land deposits. This product has since been replaced by Shell Alexia S4.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for the product now marketed as "Shell Alexia 25" \u2014 a BN 25 cylinder oil, among the first Shell developed specifically for distillate or very-low-sulphur (below 0.1%) fuel use within Emission Control Areas.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An all-purpose cylinder oil from Shell's Alexia range at BN 60, designed to cover a wide span of operating conditions, distillate and residual fuels up to 3.5% sulphur, and environments from polar to tropical with a single product. It replaces both Shell Alexia 50 and Shell Alexia LS, removing the need to carry two separate products.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A BN 80 cylinder oil introduced in 2013 using Triple-Action Technology for maximum protection against cold corrosion under low-load conditions such as slow-steaming. According to distributor information, this product has since been removed from Shell's current portfolio and can be replaced by either Alexia 50 or Alexia S6 \u2014 please confirm current availability with Shell or KARALUB.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for the product now marketed as "Shell Alexia 100" \u2014 a Triple-Action Technology cylinder oil for engines burning residual fuel with sulphur above 1.0%, operating under severe oil stress such as slow or flexible steaming regimes.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for the product now marketed as "Shell Gadinia S3 40" — a marine trunk-piston engine oil for medium-speed marine diesel engines running on distillate fuel. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A multifunctional marine trunk-piston engine oil from Shell's Gadinia S3 range at SAE 30, for main propulsion and auxiliary medium-speed marine diesel engines burning distillate or bio-fuels with up to 1% sulphur; also optimised for non-engine applications such as gearboxes and clutches, and for deck machinery requiring an SAE 30 oil.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced lubricant from Shell's Gadinia AL range at SAE 30, for medium-speed trunk-piston marine diesel engines running on distillate fuel; specially designed to control oil consumption in modern engines where liner lacquering is a potential problem, and suitable for use in certain gears and ancillary equipment.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced lubricant from Shell's Gadinia AL range at SAE 40, for medium-speed trunk-piston marine diesel engines running on distillate fuel. Being multifunctional, it can also be used for other shipboard applications such as reduction gears.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An electrical insulating oil from Shell's older Diala range, meeting ANSI/ASTM D 3487 Type I, for transformers and electrical equipment requiring standard oxidation resistance.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for the product now marketed as “Shell Diala S2 ZX-A” — a high-performance electrical insulating oil meeting ASTM Type II (greater oxidation resistance than Type I), for applications requiring rapid heat transmission and high oxidation stability.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A non-inhibited electrical insulating oil from Shell's Diala range, manufactured from naphthenic mineral feedstocks with natural low pour point characteristics; for standard oxidation resistance in transformers and electrical equipment.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An inhibited electrical insulating oil from Shell's Diala range, manufactured from naphthenic feedstocks with excellent low-temperature properties achieved without pour point depressants; PCB-free and suited to grid and industrial transformers up to maximum load.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance, non-inhibited electrical insulating oil from Shell's Diala range, made from refined naphthenic feedstock; offering high oxidation stability, good dielectric properties, and good low-temperature performance without additives.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A mineral insulating oil from Shell’s Diala range, positioned for electrical equipment requiring stable dielectric performance and good oxidation resistance; exact specification values vary by the specific inhibition level and grade — refer to Shell or KARALUB for a batch certificate of analysis.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An uninhibited electrical insulating oil from Shell's Diala range, formulated from highly refined mineral oils; offering good dielectric properties, good oxidation stability and efficient heat transfer even at low temperatures.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium inhibited electrical insulating oil from Shell's Diala range, manufactured from specially refined mineral oils with an ultra-low sulphur content; offering very high oxidation stability and excellent dielectric and low-temperature properties, with proper heat transfer even from very low starting temperatures (an “Arctic grade”).
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A light brown, lithium/calcium soap-based semi-fluid special-purpose grease from Shell, developed specifically for the lubrication of pneumatic rockdrills operated under harsh mining conditions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An entry-tier multipurpose grease from Shell's Gadus S1 range at A150 base-oil viscosity, NLGI 2, for general-purpose lubrication of rolling element and plain bearings.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An entry-tier multipurpose grease from Shell's Gadus S1 range at A320 base-oil viscosity, in the stiffer NLGI 3 consistency, for bearings requiring a firmer consistency for better retention in position.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A lithium-based multipurpose grease from Shell's Gadus S1 range at V100 base-oil viscosity, NLGI 2, for general-purpose lubrication of rolling element and plain bearings, hinges and sliding surfaces.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A European-market grade of Shell's lithium-based Gadus S1 V100 multipurpose grease, at the intermediate NLGI 2.5 consistency between the standard 2 and 3 grades.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A lithium-based multipurpose grease from Shell's Gadus S1 range at V100 base-oil viscosity, in the stiffer NLGI 3 consistency, for bearings requiring a firmer grease consistency.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A multi-purpose extreme-pressure grease with solids from Shell's Gadus S1 range, offering good mechanical and oxidation stability; protects bearing surfaces under extreme pressure with anti-rust and water-resistance qualities.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A lithium-based multipurpose grease from Shell's Gadus S1 range at V160 base-oil viscosity, NLGI 2, for general-purpose bearing lubrication across a −20°C to 120°C operating range.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A lithium-based multipurpose grease from Shell's Gadus S1 range at V160 base-oil viscosity, in the stiffer NLGI 3 consistency, for bearings requiring a firmer grease consistency.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A lithium 12-hydroxystearate soap-based grease from Shell containing 1% molybdenum disulfide and a special polymer; developed jointly with Mack and Ford for heavy-duty, severe-service applications in trucks and other automotive equipment.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A lithium-based multipurpose grease from Shell's Gadus S1 range at V220 base-oil viscosity, in the softer NLGI 1 consistency, for bearings and centralised lubrication systems needing a softer, more pumpable grease.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A lithium-based multipurpose grease from Shell's Gadus S1 range at V220 base-oil viscosity, NLGI 2, for general-purpose lubrication of loaded bearings across a −20°C to 120°C operating range.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A smooth-textured calcium-based grease from Shell’s Gadus S2 range (previous name: Shell Rhodina Grease EP(LF)), for propeller shaft and plain bearings, cranes, winches, ropes and open gears operating in wet environments; the calcium soap structure provides very high resistance to water wash-off. Operating range −10°C to 80°C, short-term up to 100°C.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A specialty grease from Shell’s Gadus S2 range with a lithium soap/polymer thickener, offering superior resistance to oil separation under the high centrifugal forces found in couplings; shows little to no separation in the ASTM D 4425 High Speed Centrifugal Test (over 36,000G at 15,000 rpm). Suitable for all types of grease-lubricated couplings including geared, chain and steel grid types.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An open gear lubricant from Shell’s Gadus S2 OG range, lead- and solvent-free, for the lubrication and protection of open gears and wire ropes subjected to extremes of ambient temperature and operating conditions; a blend of paraffinic mineral and synthetic base oils with carefully selected additives.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An open gear lubricant from Shell’s Gadus S2 OG range whose balanced formulation stays soft and pliable over long periods, eliminating build-up in the roots of the gear teeth; molybdenum disulphide and other solid lubricants reduce tooth contact zone temperatures and help alleviate stick-slip conditions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An open gear lubricant from Shell’s Gadus S2 OG range, for large open gears (girth, bull) and pinions under heavy load; excellent anti-wear protection and resistance to water wash-off.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-viscosity open gear lubricant from Shell’s Gadus S2 OG range, formulated for heavy-duty applications where extreme pressure and shock loads are encountered; designed to provide superior protection to large, slow-moving open gears and bearings typically found in mining and cement equipment.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An open gear lubricant from Shell’s Gadus S2 OG range, for heavily loaded open gears particularly found in grinding mills, kilns, shovels, draglines, ship loaders, stackers and reclaimers and excavator applications; can also serve as a single multi-service lubricant (multipurpose and open gear) for the entire machine on most shovels, excavators and draglines, excluding electric motor bearings.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-temperature open gear lubricant from Shell’s Gadus S2 OGH range, designed for use in applications such as rotary cement kiln gears and applied by spraying onto the gears; based upon an inorganic non-soap thickener dispersed in a high-viscosity base oil containing graphite.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A specialty open gear grease from Shell’s Gadus S2 range at a very soft NLGI 00/000 consistency, for spray-applied centralised lubrication systems on open gears and slow-rotating bearings.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A thread compound from Shell’s Gadus S2 range at NLGI 1 consistency, for lubricating and protecting drill-pipe threads and heavy-duty connections against galling and corrosion.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A thread compound from Shell’s Gadus S2 range at the stiffer NLGI 2 consistency, for lubricating and protecting drill-pipe threads and heavy-duty connections against galling and corrosion.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A multipurpose, non-soap grease from Shell’s Gadus S2 range, based on a non-melting bentonite clay thickener system at NLGI 1 consistency; gives excellent lubrication in wet or dry applications over a wide range of temperatures and is suitable where the lubricant is exposed to contaminants such as water and chemicals, including chemical plants and paper mills. Not recommended for centralised lubrication systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A multipurpose, non-soap grease from Shell’s Gadus S2 range, based on a non-melting bentonite clay thickener system at NLGI 2 consistency; gives excellent lubrication in wet or dry applications over a wide range of temperatures, suitable for chemical plants and paper mills exposed to water and chemical contaminants. Not recommended for centralised lubrication systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The NLGI 1 grade of Shell’s Gadus S2 U1000D multipurpose non-soap grease (the official replacement for Shell Rhodina EP (LF) per Shell’s own portfolio conversion guide), based on a bentonite clay thickener for resistance to water and chemical contamination.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The NLGI 2 grade of Shell’s Gadus S2 U1000D multipurpose non-soap grease (the official replacement for Shell Rhodina EP (LF) per Shell’s own portfolio conversion guide), based on a bentonite clay thickener for resistance to water and chemical contamination.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An inorganic non-soap thickener grease from Shell’s Gadus S2 range (previously known as Shell Darina Grease R 2), with a high-viscosity base oil and a special high-temperature oxidation inhibitor; provides satisfactory lubrication beyond the temperature limitations of lithium-based greases and, with caution, can be used above 200°C with a suitably adjusted relubrication interval.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A general-purpose grease from Shell’s Gadus S2 range based on a lithium hydroxystearate soap thickener at the softer NLGI 1 consistency, fortified with anti-oxidant, anti-wear and anti-rust additives.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A general-purpose grease from Shell’s Gadus S2 range based on a lithium hydroxystearate soap thickener at the stiffer NLGI 3 consistency, fortified with anti-oxidant, anti-wear and anti-rust additives.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A multipurpose grease from Shell’s Gadus S2 range (the official replacement for Shell Malleus JB per Shell’s own portfolio conversion guide), at NLGI 2 consistency for heavy-duty industrial applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A low-noise lithium grease from Shell’s Gadus S2 range, intended for rolling-element bearings (62mm) in electric motors where low noise level is a critical parameter; contains anti-oxidant additives.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A multipurpose grease from Shell’s Gadus S2 range for passenger car, light and heavy truck wheel bearings and chassis; especially suitable for cold climates with improved low-temperature performance.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium multi-purpose grease from Shell’s Gadus S2 range based on high viscosity index mineral oil and a lithium soap thickener, with state-of-the-art additives for excellent anti-wear and anti-corrosion properties; especially suitable for wheel bearings operating in severe conditions and under load, with change intervals up to 60,000km.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium quality, non-lead multipurpose grease from Shell’s Gadus S2 range based on lithium soap; originally conceived and patented by Shell and continuously improved over the years. Its multipurpose nature allows for use in both heavy-duty automotive and industrial applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A multipurpose extreme-pressure grease from Shell’s Gadus S2 range at a very soft NLGI 00 consistency, based on a blend of high viscosity index mineral oils and a lithium hydroxystearate soap thickener; formulated to offer good resistance to water wash-out.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A multipurpose extreme-pressure grease from Shell’s Gadus S2 range at the softer NLGI 1 consistency, based on a blend of high viscosity index mineral oils and a lithium hydroxystearate soap thickener; outstanding load-carrying capacity to withstand heavy and shock loads without failure of the lubricant film.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-quality multipurpose grease from Shell’s Gadus S2 V220AC range at the softer NLGI 1 consistency, based on high viscosity index mineral oil and a mixed lithium/calcium soap thickener; contains extreme-pressure, anti-wear, anti-oxidation and anti-corrosion additives. Operating range −20°C to 130°C, short-term up to 150°C.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-quality multipurpose grease from Shell’s Gadus S2 V220AC range at NLGI 2 consistency, based on high viscosity index mineral oil and a mixed lithium/calcium soap thickener; excellent mechanical stability retained even under severe vibration, demonstrated in the field with regreasing intervals above 30,000km even for demanding applications such as transmission joints.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-quality multipurpose grease from Shell’s Gadus S2 V220AC range at the stiffer NLGI 3 consistency, based on high viscosity index mineral oil and a mixed lithium/calcium soap thickener; contains extreme-pressure, anti-wear, anti-oxidation and anti-corrosion additives.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance bearing grease from Shell’s Gadus S2 V220AD range at the softer NLGI 1 consistency, for the lubrication of bearings subjected to harsh conditions; based on high viscosity index mineral oil and a mixed lithium/calcium soap thickener.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance bearing grease from Shell’s Gadus S2 V220AD range at NLGI 2 consistency, for the lubrication of bearings subjected to harsh conditions; based on high viscosity index mineral oil and a mixed lithium/calcium soap thickener.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A grease from Shell’s Gadus S2 range at NLGI 1 consistency; part of the comprehensive Shell Gadus family that includes multipurpose lubricants as well as speciality products, including advanced polyurea synthetic products designed for the most severe extreme-temperature and long-life applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A specialty grease from Shell’s Gadus S3 range for flexible gear couplings rotating at speeds greater than 300 rpm; a lithium polyethylene complex grease based on mineral oil, containing anti-oxidants, rust inhibitors, extreme-pressure and anti-wear additives.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance sprayable running-in aluminium complex grease from Shell’s Gadus S3 range (the official replacement for Shell Malleus RN per Shell’s own portfolio conversion guide), based on a part-synthetic base oil blend and containing micronised graphite as a solid lubricant; its chemistry is designed to cause a well-controlled smoothening process that reduces surface roughness on new and damaged open gears.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-technology grease from Shell’s Gadus S3 T range based on a diurea thickener, designed to give optimum performance for grease lubrication in industrial bearings; dropping point over 260°C and an operating range of −10°C to 160°C.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance, high-temperature, long-life grease from Shell’s Gadus S3 T range for heavy-duty industrial applications; based on fully synthetic base stocks and the latest diurea thickener technology, formulated specifically for the lubrication of high-temperature, slow-moving bearings such as continuous-casting bearings in the steel industry.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A grease from Shell’s Gadus S3 range, recommended for use in electric motor bearings such as those used in industrial pumps, fans and compressors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium multi-purpose grease from Shell’s Gadus S3 V220C range at the softer NLGI 1 consistency, based on high viscosity index mineral oil and a lithium complex soap thickener; excellent high-temperature oxidation performance and protection from wear, corrosion and water. Operating range −25°C to 140°C.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium high-temperature multi-purpose grease from Shell’s Gadus S3 range (previous names: Shell Albida Grease HD 2, Shell Retinax SD 2), for heavy-duty industrial applications; based on high viscosity index mineral oil and a lithium complex soap thickener, especially suitable for slow-moving, heavy-duty large bearings operating at high temperature and under severe load.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance, high-temperature grease from Shell’s Gadus S3 V460D range (previous name: Shell Retinax SDX) at the softer NLGI 1 consistency, for slow-moving, heavily loaded large bearings subject to shock loading; contains 3% molybdenum disulphide, for winter use. Operating range −10°C to 150°C.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium multi-purpose heavy-duty grease from Shell’s Gadus S3 V460D range (previous names: Shell Retinax SDX, Shell Albida HDX 2) at NLGI 1.5 consistency; based on high viscosity index mineral oil and a lithium complex soap thickener, containing MoS2 to handle shock loads, for heavy-duty, slow-moving bearings in the mining and steel industries.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance, high-temperature grease from Shell’s Gadus S3 V460D range (previous name: Shell Retinax SDX) at NLGI 2 consistency, for slow-moving, heavily loaded large bearings subject to shock loading; contains solids to handle shock loads, for summer use.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium multi-purpose grease from Shell’s Gadus S3 range — the current name for the product previously marketed as Shell Gadus S3 V460D 2; a lithium complex grease with solids, for slow-moving, heavily loaded large bearings subject to shock loading in the construction and mining sectors. Operating range −20°C to 150°C.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium multi-purpose heavy-duty grease from Shell’s Gadus S3 range (previous name: Shell Albida SDM 1), for slow and very slow-moving heavy-duty plain and rolling-element bearings operating under extremely high continuous loads, shock loads, water-rich environments, or high-speed (>200 rpm) flexible gear couplings; main applications in steel, mining, cement and chemical industries.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A very soft NLGI 000 grease from Shell’s Gadus S3 range (the official replacement for Shell NL Grease 000 per Shell’s own portfolio conversion guide), for the penetrating lubrication of wire ropes.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A lithium/calcium complex grease from Shell’s Gadus S3 range (the official replacement for Shell ROV Cable Grease per Shell’s own portfolio conversion guide), based on a high-viscosity mineral oil containing anti-oxidants and corrosion inhibitors; specially designed for the lubrication and protection of wire ropes.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A stiffer NLGI 3 grease from Shell’s Gadus S3 range (the official replacement for Shell Malleus HDX per Shell’s own portfolio conversion guide), designed for the lubrication and protection of wire ropes in heavy-duty industrial applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A specialty grease from Shell’s Gadus S4 range (the official replacement for Shell Malleus JBZ per Shell’s own portfolio conversion guide), at NLGI 1.5 consistency for specialised heavy-duty industrial applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced multipurpose grease from Shell’s Gadus S4 range for use in centralised lubrication systems. It has good pumpability and water resistance, and provides effective extreme-pressure properties for lubricating heavily loaded components. Based on highly refined mineral and selected synthetic base oils, providing excellent protection from −45°C to 120°C. Approved by Mercedes-Benz and MAN, suitable for centralised chassis lubrication systems on trucks and buses.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance, high-temperature, long-life grease from Shell’s Gadus S5 range at the softer NLGI 1.5 consistency, for heavy-duty industrial applications; uses fully synthetic base stocks and the latest diurea thickener technology, especially suitable for sealed and semi-sealed applications involving slow-moving, heavy-duty bearings operating at high temperatures and under severe loads.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced extreme-pressure grease from Shell’s Gadus S5 range for high-speed bearings; can be used on electrical motors, high-speed bearings (loaded and unloaded), high-speed machine tool bearings, bearings of industrial fans, and wheel bearings requiring high DM ratings. Lower maintenance costs due to the extra-long service life obtainable in electrical motors and high-speed bearings.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A lithium soap grease from Shell’s GadusRail S2 range at NLGI 1 consistency, fortified with a specifically formulated multipurpose additive package and 3% molybdenum disulfide for enhanced anti-wear and load-carrying properties; for railroad wheel/track lubrication, compatible with Bijur, Portec and Moore and Steele lubricator systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A lithium soap grease from Shell’s GadusRail S2 range at NLGI 2 consistency, designed to improve lubricity and durability under hot weather conditions; contains 3% molybdenum disulfide and a highly shear-stable tackifier that improves grease adhesion to track surfaces.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A long-life railroad grease from Shell’s GadusRail S3 range with extreme-pressure additives to provide higher load-carrying capacity; meets AAR M-942 (Revised 1992) and NSW SRA requirements, designed for long life and high load-carrying capacity in railroad axle box applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance extreme-pressure grease from Shell’s GadusRail S3 range for heavily loaded railway axle bearings; based on a lithium thickener, free of solids, with good water resistance, complying with the European Union EN 12081 Class A grease specification for railroad axle bearings up to 200km/h; used in rail vehicles such as passenger wagons and railcars.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium multi-purpose grease from Shell’s GadusRail S3 range with excellent mechanical stability at high temperatures and under vibrating conditions; based on high viscosity index mineral oil and a new lithium complex soap thickener, containing additives to enhance anti-oxidation, anti-wear and anti-corrosion properties; especially suitable for bearings operating at high temperatures, low and high speeds and in the presence of moisture.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A calcium soap grease from Shell’s GadusRail S3 range at NLGI 1 consistency, fortified with a specifically formulated multipurpose additive package for use as a railroad track lubricant; offers improved protection specifically in wet and harsh conditions, exhibits a tenacious, tacky film that resists environmental conditions, and is suitable for use in a variety of automatic lubricators.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A top-tier semi-synthetic lithium/calcium soap grease from Shell’s GadusRail S3 range at NLGI 2 consistency; allows better protection specifically in wet and other harsh conditions, with an advanced amount of solid additives; its outstanding friction reduction and long-lasting protection has been proven in extensive field trials on test tracks.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced grease from Shell’s GadusRail range (previous name: Shell Nerita Grease 2858) for high-speed European rail axle boxes; a lithium-based, long-life grease engineered for reliable performance under high-speed conditions and extended service intervals; approved by SNCF Group and suitable for trains operating over 200 kph.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A biodegradable grease from Shell’s GadusRail S4 range at a very soft NLGI 000 consistency, designed for usage in onboard lubricators in the railway business requiring a thin grease meeting EN 16028 requirements; good anti-wear and anti-corrosive properties combined with pumpability in a wide range of temperatures.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for the product now marketed as “Shell Morlina S2 B 32” — a rust and oxidation (R&O) inhibited bearing and circulating oil at ISO VG 32, providing three-way protection for industrial equipment. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for the product now marketed as “Shell Morlina S2 B 46” — a rust and oxidation (R&O) inhibited bearing and circulating oil at ISO VG 46, providing three-way protection for industrial equipment. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for the product now marketed as “Shell Morlina S2 B 68” — a rust and oxidation (R&O) inhibited bearing and circulating oil at ISO VG 68, providing three-way protection for industrial equipment. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for the product now marketed as “Shell Morlina S2 B 100” — a rust and oxidation (R&O) inhibited bearing and circulating oil at ISO VG 100, providing three-way protection for industrial equipment. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for the product now marketed as “Shell Morlina S2 B 150” — a rust and oxidation (R&O) inhibited bearing and circulating oil at ISO VG 150, providing three-way protection for industrial equipment. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for the product now marketed as “Shell Morlina S2 B 220” — a rust and oxidation (R&O) inhibited bearing and circulating oil at ISO VG 220, providing three-way protection for industrial equipment. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for the product now marketed as “Shell Morlina S2 B 320” — a rust and oxidation (R&O) inhibited bearing and circulating oil at ISO VG 320, providing three-way protection for industrial equipment. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for the product now marketed as “Shell Morlina S2 B 460” — a rust and oxidation (R&O) inhibited bearing and circulating oil at ISO VG 460, providing three-way protection for industrial equipment. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A conventional, non-EP bearing and circulating oil from Shell’s Morlina S1 B range at ISO VG 100; for industrial applications requiring reliable rust and oxidation protection, approved by or meeting Primetals Morgoil® Lubricant Specification requirements.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A conventional, non-EP bearing and circulating oil from Shell’s Morlina S1 B range at ISO VG 150; for industrial applications requiring reliable rust and oxidation protection, approved by or meeting Primetals Morgoil® Lubricant Specification requirements.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A conventional, non-EP bearing and circulating oil from Shell’s Morlina S1 B range at ISO VG 220; for industrial applications requiring reliable rust and oxidation protection, approved by or meeting Primetals Morgoil® Lubricant Specification requirements.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A conventional, non-EP bearing and circulating oil from Shell’s Morlina S1 B range at ISO VG 320; for industrial applications requiring reliable rust and oxidation protection, approved by or meeting Primetals Morgoil® Lubricant Specification requirements.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A conventional, non-EP bearing and circulating oil from Shell’s Morlina S1 B range at ISO VG 460; for industrial applications requiring reliable rust and oxidation protection, approved by or meeting Primetals Morgoil® Lubricant Specification requirements.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A conventional, non-EP bearing and circulating oil from Shell’s Morlina S1 B range at ISO VG 680; for industrial applications requiring reliable rust and oxidation protection, approved by or meeting Primetals Morgoil® Lubricant Specification requirements.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A versatile, anti-wear protection bearing and circulating oil from Shell’s Morlina S2 B range at ISO VG 32, for industrial applications; formulated with a rust and oxidation inhibitor package for long oil life, approved by or meeting Primetals Morgoil®, Danieli, DIN 51517 and ISO 12925-1 CKB/CKE requirements.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A versatile, anti-wear protection bearing and circulating oil from Shell’s Morlina S2 B range at ISO VG 46, for industrial applications; formulated with a rust and oxidation inhibitor package for long oil life, approved by or meeting Primetals Morgoil®, Danieli, DIN 51517 and ISO 12925-1 CKB/CKE requirements.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A versatile, anti-wear protection bearing and circulating oil from Shell’s Morlina S2 B range at ISO VG 68, for industrial applications; formulated with a rust and oxidation inhibitor package for long oil life, approved by or meeting Primetals Morgoil®, Danieli, DIN 51517 and ISO 12925-1 CKB/CKE requirements.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A versatile, anti-wear protection bearing and circulating oil from Shell’s Morlina S2 B range at ISO VG 100, for industrial applications; formulated with a rust and oxidation inhibitor package for long oil life, approved by or meeting Primetals Morgoil®, Danieli, DIN 51517 and ISO 12925-1 CKB/CKE requirements.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A versatile, anti-wear protection bearing and circulating oil from Shell’s Morlina S2 B range at ISO VG 220, for industrial applications; formulated with a rust and oxidation inhibitor package for long oil life, approved by or meeting Primetals Morgoil®, Danieli, DIN 51517 and ISO 12925-1 CKB/CKE requirements.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A versatile, anti-wear protection bearing and circulating oil from Shell’s Morlina S2 B range at ISO VG 320, for industrial applications; formulated with a rust and oxidation inhibitor package for long oil life, approved by or meeting Primetals Morgoil®, Danieli, DIN 51517 and ISO 12925-1 CKB/CKE requirements.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A versatile, anti-wear protection bearing and circulating oil from Shell’s Morlina S2 B range at ISO VG 460, for industrial applications; formulated with a rust and oxidation inhibitor package for long oil life, approved by or meeting Primetals Morgoil®, Danieli, DIN 51517 and ISO 12925-1 CKB/CKE requirements.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A versatile, anti-wear protection bearing and circulating oil from Shell’s Morlina S2 B range at ISO VG 680, for industrial applications; formulated with a rust and oxidation inhibitor package for long oil life, approved by or meeting Primetals Morgoil®, Danieli, DIN 51517 and ISO 12925-1 CKB/CKE requirements.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A special-application bearing and circulating oil from Shell’s Morlina S2 BA range (previous name: Shell Morlina T), designed for demanding industrial environments such as steel mills, particularly Morgan (Primetals) No-Twist® Rod Mill Systems; provides excellent wear protection, corrosion resistance and system efficiency even under severe water contamination, suitable for applications requiring mild EP properties.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A specialty bearing and circulating oil from Shell’s Morlina S2 BA range at ISO VG 150, for MORGOIL bearing and steel mill circulating systems; extra protection and superior water separation for wet, contaminated conditions, suitable for No-Twist® mill systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A specialty bearing and circulating oil from Shell’s Morlina S2 BA range (previous name: Shell Morlina SD) at ISO VG 220, for MORGOIL bearing and steel mill circulating systems; extra protection and superior water separation for wet, contaminated conditions, suitable for No-Twist® mill systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A specialty bearing and circulating oil from Shell’s Morlina S2 BA range at ISO VG 320, for MORGOIL bearing and steel mill circulating systems; extra protection and superior water separation for wet, contaminated conditions, suitable for No-Twist® mill systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A specialty bearing and circulating oil from Shell’s Morlina S2 BA range at ISO VG 460, for MORGOIL bearing and steel mill circulating systems; extra protection and superior water separation for wet, contaminated conditions, suitable for No-Twist® mill systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A special low-viscosity, solvent-refined mineral oil from Shell’s Morlina S2 BL range at ISO VG 5, blended with zinc-free additives; provides extended performance in high-speed machine tool spindles, oil-lubricated plain and rolling element bearings, and circulating systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A special low-viscosity, solvent-refined mineral oil from Shell’s Morlina S2 BL range at ISO VG 10, blended with zinc-free additives; provides extended performance in high-speed machine tool spindles, oil-lubricated plain and rolling element bearings, and circulating systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A special low-viscosity, solvent-refined mineral oil from Shell’s Morlina S2 BL range at ISO VG 22, blended with zinc-free additives; provides extended performance in high-speed machine tool spindles, oil-lubricated plain and rolling element bearings, and circulating systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium rust and oxidation inhibited lubricating oil from Shell’s Morlina S3 BA range at ISO VG 100, providing excellent lubrication in MORGOIL® bearing and steel mill circulating systems; exceptional water separation characteristics make it highly suitable for hot, wet conditions, protecting equipment against corrosion and oil oxidation for long service life.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium rust and oxidation inhibited lubricating oil from Shell’s Morlina S3 BA range at ISO VG 150, providing excellent lubrication in MORGOIL® bearing and steel mill circulating systems; exceptional water separation characteristics make it highly suitable for hot, wet conditions, protecting equipment against corrosion and oil oxidation for long service life.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium rust and oxidation inhibited lubricating oil from Shell’s Morlina S3 BA range (previous name: Shell Morlina SD) at ISO VG 220, providing excellent lubrication in MORGOIL® bearing and steel mill circulating systems; exceptional water separation characteristics make it highly suitable for hot, wet conditions, protecting equipment against corrosion and oil oxidation for long service life.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium rust and oxidation inhibited lubricating oil from Shell’s Morlina S3 BA range at ISO VG 320, providing excellent lubrication in MORGOIL® bearing and steel mill circulating systems; exceptional water separation characteristics make it highly suitable for hot, wet conditions, protecting equipment against corrosion and oil oxidation for long service life.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium rust and oxidation inhibited lubricating oil from Shell’s Morlina S3 BA range at ISO VG 460, providing excellent lubrication in MORGOIL® bearing and steel mill circulating systems; exceptional water separation characteristics make it highly suitable for hot, wet conditions, protecting equipment against corrosion and oil oxidation for long service life.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium rust and oxidation inhibited lubricating oil from Shell’s Morlina S3 BA range at ISO VG 680, providing excellent lubrication in MORGOIL® bearing and steel mill circulating systems; exceptional water separation characteristics make it highly suitable for hot, wet conditions, protecting equipment against corrosion and oil oxidation for long service life.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A fully synthetic, high-performance bearing and circulation lubricant from Shell’s Morlina S4 B range at ISO VG 68, based on high-performance base fluids; offers the longest oil life in the Morlina range under severe conditions, superior low start-up temperature performance, improved energy efficiency, and excellent anti-wear and corrosion protection; recommended for moderately loaded gearboxes, worm gear drives, vacuum pumps and compressors, including certain "lubricated-for-life" systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A fully synthetic, high-performance bearing and circulation lubricant from Shell’s Morlina S4 B range at ISO VG 100, based on high-performance base fluids; offers the longest oil life in the Morlina range under severe conditions, superior low start-up temperature performance, improved energy efficiency, and excellent anti-wear and corrosion protection; recommended for moderately loaded gearboxes, worm gear drives, vacuum pumps and compressors, including certain "lubricated-for-life" systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A fully synthetic, high-performance bearing and circulation lubricant from Shell’s Morlina S4 B range at ISO VG 150, based on high-performance base fluids; offers the longest oil life in the Morlina range under severe conditions, superior low start-up temperature performance, improved energy efficiency, and excellent anti-wear and corrosion protection; recommended for moderately loaded gearboxes, worm gear drives, vacuum pumps and compressors, including certain "lubricated-for-life" systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A fully synthetic, high-performance bearing and circulation lubricant from Shell’s Morlina S4 B range at ISO VG 220, based on high-performance base fluids; offers the longest oil life in the Morlina range under severe conditions, superior low start-up temperature performance, improved energy efficiency, and excellent anti-wear and corrosion protection; recommended for moderately loaded gearboxes, worm gear drives, vacuum pumps and compressors, including certain "lubricated-for-life" systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A fully synthetic, high-performance bearing and circulation lubricant from Shell’s Morlina S4 B range at ISO VG 320, based on high-performance base fluids; offers the longest oil life in the Morlina range under severe conditions, superior low start-up temperature performance, improved energy efficiency, and excellent anti-wear and corrosion protection; recommended for moderately loaded gearboxes, worm gear drives, vacuum pumps and compressors, including certain "lubricated-for-life" systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A fully synthetic, high-performance bearing and circulation lubricant from Shell’s Morlina S4 B range at ISO VG 460, based on high-performance base fluids; offers the longest oil life in the Morlina range under severe conditions, superior low start-up temperature performance, improved energy efficiency, and excellent anti-wear and corrosion protection; recommended for moderately loaded gearboxes, worm gear drives, vacuum pumps and compressors, including certain "lubricated-for-life" systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A fully synthetic, high-performance bearing and circulation lubricant from Shell’s Morlina S4 B range at ISO VG 680, based on high-performance base fluids; offers the longest oil life in the Morlina range under severe conditions, superior low start-up temperature performance, improved energy efficiency, and excellent anti-wear and corrosion protection; recommended for moderately loaded gearboxes, worm gear drives, vacuum pumps and compressors, including certain "lubricated-for-life" systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A fully synthetic, high-performance bearing and circulation lubricant from Shell’s Morlina S4 B range at ISO VG 1000, based on high-performance base fluids; offers the longest oil life in the Morlina range under severe conditions, superior low start-up temperature performance, improved energy efficiency, and excellent anti-wear and corrosion protection; recommended for moderately loaded gearboxes, worm gear drives, vacuum pumps and compressors, including certain "lubricated-for-life" systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Morlina S2 BA” tier; a special-application bearing and circulating oil at ISO VG 100, for challenging industrial systems such as Morgan No-Twist® mill systems. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Morlina S2 BA” tier; a special-application bearing and circulating oil at ISO VG 150, for challenging industrial systems such as Morgan No-Twist® mill systems. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Morlina S2 BA” tier; a special-application bearing and circulating oil at ISO VG 220, for challenging industrial systems such as Morgan No-Twist® mill systems. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within Shell’s numbered Mysella gas-engine oil range (such as Mysella S2 Z or S3 N); a gas engine oil at grade 15W-40, for four-stroke, spark-ignition gas-fuelled engines. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within Shell’s numbered Mysella gas-engine oil range (such as Mysella S2 Z or S3 N); a gas engine oil at grade 30, for four-stroke, spark-ignition gas-fuelled engines. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within Shell’s numbered Mysella gas-engine oil range (such as Mysella S2 Z or S3 N); a gas engine oil at grade 40, for four-stroke, spark-ignition gas-fuelled engines. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A low-ash gas engine oil from Shell’s Mysella LA range at SAE 30, a long-established and well-proven product used extensively in four-stroke engines burning natural and sour gas, in dual-fuel engines and in gas compressor sets; carries a wide range of approvals from engine manufacturers including Cummins, MWM Deutz, Jenbacher, MTU, Ruston Diesels and Wärtsilä.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A low-ash gas engine oil from Shell’s Mysella LA range at SAE 40, a long-established and well-proven product used extensively in four-stroke engines burning natural and sour gas, in dual-fuel engines and in gas compressor sets; carries a wide range of approvals from engine manufacturers including Cummins, MWM Deutz, Jenbacher, MTU, Ruston Diesels and Wärtsilä.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A medium-ash gas engine oil from Shell’s Mysella MA range at SAE 30, offering API CD performance and a phosphorus level below 300 parts per million to meet the requirements of industrial exhaust gas catalytic converter manufacturers.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A medium-ash gas engine oil from Shell’s Mysella MA range at SAE 40, offering API CD performance and a phosphorus level below 300 parts per million to meet the requirements of industrial exhaust gas catalytic converter manufacturers.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Mysella S3 Z” range; a very-low-ash-technology gas engine oil at SAE 30, for natural gas engines requiring an ash-less or very low ash product. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Mysella S3 Z” range; a very-low-ash-technology gas engine oil at SAE 40, for natural gas engines requiring an ash-less or very low ash product. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A gas engine oil from Shell’s Mysella S2 N range at SAE 40, blended for use in 4-stroke, spark-ignition engines which require a ‘low ash’ oil and use natural gas as fuel.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A heavy-duty lubricant from Shell’s Mysella S2 Z range at SAE 30, for high performance natural gas engines which require an “ash-less” product; using ash-less technology it minimises engine wear and deposits in combustion chambers.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A heavy-duty lubricant from Shell’s Mysella S2 Z range at SAE 40, for high performance natural gas engines which require an “ash-less” product; using ash-less technology it minimises engine wear and deposits in combustion chambers.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A heavy-duty lubricant from Shell’s Mysella S2 Z range at SAE 40-15W, for high performance natural gas engines which require an “ash-less” product; using ash-less technology it minimises engine wear and deposits in combustion chambers.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high performance gas engine oil from Shell’s Mysella S3 N range at SAE 30, blended for use in 4-stroke, spark-ignition engines that require a low ash oil and use natural gas as fuel; satisfies the new generation of stationary gas engines designed to meet emerging NOx emission legislation.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A medium ash gas engine oil from Shell’s Mysella S3 S range (previous name: Shell Mysella MA) at SAE 40, blended for use in 4-stroke, spark-ignition engines requiring a medium ash oil; approved for use in engines from manufacturers such as GE Jenbacher, MAN B&W and Waukesha, and suitable for engines using sour gases as fuel.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high performance gas engine oil from Shell’s Mysella S3 Z range (previous name: Shell Mysella R) at SAE 30, designed for natural gas engines requiring an ash-less or very low ash product; using very low ash technology, it minimizes carbon and ash deposits on pistons, in ring belt areas, exhaust and intake ports and valve stems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high performance gas engine oil from Shell’s Mysella S3 Z range (previous name: Shell Mysella R) at SAE 40, designed for natural gas engines requiring an ash-less or very low ash product; using very low ash technology, it minimizes carbon and ash deposits on pistons, in ring belt areas, exhaust and intake ports and valve stems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high performance quality oil from Shell’s Mysella S5 N range (previous name: Shell Mysella XL) at SAE 40, blended for use in highly-rated, 4-stroke, spark-ignition engines which require a ‘low ash’ oil; satisfies the new generation of stationary gas engines designed to meet emerging NOx emission legislation and ‘lean’/‘clean’ burn technology, developed to provide extended drain intervals where oil life is a limiting operational factor.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high performance quality oil from Shell’s Mysella S5 N range (previous name: Shell Mysella XL) at SAE 40-15W, blended for use in highly-rated, 4-stroke, spark-ignition engines which require a ‘low ash’ oil; satisfies the new generation of stationary gas engines designed to meet emerging NOx emission legislation and ‘lean’/‘clean’ burn technology, developed to provide extended drain intervals where oil life is a limiting operational factor.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium gas engine oil from Shell’s Mysella S5 S range at SAE 40, suitable for long drain intervals in natural gas applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance gas engine oil from Shell’s Mysella S6 N range at SAE 40, for highly-rated 4-stroke, spark-ignition engines, especially newer engines with stainless steel pistons where higher oil stress conditions can be experienced; offers extended oil life through better TBN retention, improved oxidation and nitration resistance, viscosity control and reduced formation of harmful acids.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A gas engine oil from Shell’s Mysella S6 range at SAE 40; part of Shell’s next-generation gas engine oil portfolio, listed alongside Mysella S3 N, S3 S, S5 N, S5 S and S7 N Ultra in Shell’s own official OEM approval comparison table (including base number and ash level data).
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The most advanced gas engine oil in Shell’s Mysella range at SAE 40, designed for highly-rated 4-stroke, spark-ignition engines, especially those with steel pistons; ultra-extended oil life of up to 4,000 hours ODI (up to double previous-generation premium engine oils), proven over 45,000+ hours of field trials in more than 10 Jenbacher Type 6 engines, approved by INNIO for Jenbacher Type 6 (versions C, E, F, J, H, K) and Type 2 and 3 engines.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Mysella S5 N” range; a high-performance, low-ash gas engine oil at SAE 30, for highly-rated 4-stroke, spark-ignition engines. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Mysella S5 N” range; a high-performance, low-ash gas engine oil at SAE 40, for highly-rated 4-stroke, spark-ignition engines. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; an extreme-pressure industrial gear oil at ISO VG 68, for the lubrication of heavy-duty industrial gears. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; an extreme-pressure industrial gear oil at ISO VG 100, for the lubrication of heavy-duty industrial gears. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; an extreme-pressure industrial gear oil at ISO VG 150, for the lubrication of heavy-duty industrial gears. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; an extreme-pressure industrial gear oil at ISO VG 220, for the lubrication of heavy-duty industrial gears. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; an extreme-pressure industrial gear oil at ISO VG 320, for the lubrication of heavy-duty industrial gears. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; an extreme-pressure industrial gear oil at ISO VG 460, for the lubrication of heavy-duty industrial gears. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; an extreme-pressure industrial gear oil at ISO VG 680, for the lubrication of heavy-duty industrial gears. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; an extreme-pressure industrial gear oil at ISO VG 800, for the lubrication of heavy-duty industrial gears. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; an extreme-pressure industrial gear oil at ISO VG 1000, for the lubrication of heavy-duty industrial gears. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; a premium quality, lead-free, extreme-pressure industrial gear oil at ISO VG 220, formally approved by Flender AG; offers high load carrying capacity and anti-friction characteristics for superior performance in gears and other industrial applications, plus excellent water separation properties.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; a premium quality, lead-free, extreme-pressure industrial gear oil at ISO VG 320, formally approved by Flender AG; offers high load carrying capacity and anti-friction characteristics for superior performance in gears and other industrial applications, plus excellent water separation properties.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Omala S2 GX” range; a premium quality, lead-free, extreme-pressure industrial gear oil at ISO VG 460, formally approved by Flender AG; offers high load carrying capacity and anti-friction characteristics for superior performance in gears and other industrial applications, plus excellent water separation properties.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance, fully synthetic, extreme-pressure industrial gear oil from Shell’s Omala HD range (previous name: Shell Hyperia S) at ISO VG 100, the top tier of the Omala portfolio; displays excellent stability at high temperatures and high load carrying capacity, fully compatible with mineral oils and offering extended oil service life, for all types of industrial enclosed gear systems and those subject to extreme temperatures and heavy loads.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance, fully synthetic, extreme-pressure industrial gear oil from Shell’s Omala HD range (previous name: Shell Hyperia S) at ISO VG 150, the top tier of the Omala portfolio; displays excellent stability at high temperatures and high load carrying capacity, fully compatible with mineral oils and offering extended oil service life, for all types of industrial enclosed gear systems and those subject to extreme temperatures and heavy loads.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance, fully synthetic, extreme-pressure industrial gear oil from Shell’s Omala HD range (previous name: Shell Hyperia S) at ISO VG 220, the top tier of the Omala portfolio; displays excellent stability at high temperatures and high load carrying capacity, fully compatible with mineral oils and offering extended oil service life, for all types of industrial enclosed gear systems and those subject to extreme temperatures and heavy loads.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance, fully synthetic, extreme-pressure industrial gear oil from Shell’s Omala HD range (previous name: Shell Hyperia S) at ISO VG 320, the top tier of the Omala portfolio; displays excellent stability at high temperatures and high load carrying capacity, fully compatible with mineral oils and offering extended oil service life, for all types of industrial enclosed gear systems and those subject to extreme temperatures and heavy loads.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance, fully synthetic, extreme-pressure industrial gear oil from Shell’s Omala HD range (previous name: Shell Hyperia S) at ISO VG 460, the top tier of the Omala portfolio; displays excellent stability at high temperatures and high load carrying capacity, fully compatible with mineral oils and offering extended oil service life, for all types of industrial enclosed gear systems and those subject to extreme temperatures and heavy loads.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A polyalphaolefin (PAO) based synthetic industrial gear oil from Shell’s Omala RL range at ISO VG 220, for industrial gear systems requiring a synthetic lubricant for wide-temperature performance and long service life.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A polyalphaolefin (PAO) based synthetic industrial gear oil from Shell’s Omala RL range at ISO VG 320; formulated to provide a long oil life with excellent oxidative stability, film strength, lubricity and wear protection, designed for use in a wide range of gear applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A polyalphaolefin (PAO) based synthetic industrial gear oil from Shell’s Omala RL range at ISO VG 460; formulated to provide a long oil life with excellent oxidative stability, film strength, lubricity and wear protection, designed for use in a wide range of gear applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A quality refined, high viscosity mineral oil compounded with a small percentage of fatty oils from Shell’s Omala S1 W range at ISO VG 460; particularly suitable for the lubrication of low speed enclosed gears and worm drive applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A quality refined, high viscosity mineral oil compounded with a small percentage of fatty oils from Shell’s Omala S1 W range (previous name: Valvata J 680) at ISO VG 680; may be used to advantage in worm gears prone to suffer extensive wear and to reduce bulk oil temperature, typical examples being gears running at low speed under stop-start conditions; also suitable for high temperature, high pressure steam cylinder applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An extreme-pressure industrial gear oil from Shell’s Omala S2 G range at ISO VG 68, designed primarily for the lubrication of heavy duty industrial gears; high load carrying capacity and anti-friction characteristics combine to offer superior performance in gears, suitable for enclosed industrial gear systems using steel spur and helical gears as well as bearings and other components in circulating and splash-lubricated systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An extreme-pressure industrial gear oil from Shell’s Omala S2 G range at ISO VG 100, designed primarily for the lubrication of heavy duty industrial gears; high load carrying capacity and anti-friction characteristics combine to offer superior performance in gears, suitable for enclosed industrial gear systems using steel spur and helical gears as well as bearings and other components in circulating and splash-lubricated systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An extreme-pressure industrial gear oil from Shell’s Omala S2 G range at ISO VG 150, designed primarily for the lubrication of heavy duty industrial gears; high load carrying capacity and anti-friction characteristics combine to offer superior performance in gears, suitable for enclosed industrial gear systems using steel spur and helical gears as well as bearings and other components in circulating and splash-lubricated systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An extreme-pressure industrial gear oil from Shell’s Omala S2 G range at ISO VG 320, designed primarily for the lubrication of heavy duty industrial gears; high load carrying capacity and anti-friction characteristics combine to offer superior performance in gears, suitable for enclosed industrial gear systems using steel spur and helical gears as well as bearings and other components in circulating and splash-lubricated systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An extreme-pressure industrial gear oil from Shell’s Omala S2 G range at ISO VG 460, designed primarily for the lubrication of heavy duty industrial gears; high load carrying capacity and anti-friction characteristics combine to offer superior performance in gears, suitable for enclosed industrial gear systems using steel spur and helical gears as well as bearings and other components in circulating and splash-lubricated systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An extreme-pressure industrial gear oil from Shell’s Omala S2 G range at ISO VG 680, designed primarily for the lubrication of heavy duty industrial gears; high load carrying capacity and anti-friction characteristics combine to offer superior performance in gears, suitable for enclosed industrial gear systems using steel spur and helical gears as well as bearings and other components in circulating and splash-lubricated systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An extreme-pressure industrial gear oil from Shell’s Omala S2 G range at ISO VG 1000, designed primarily for the lubrication of heavy duty industrial gears; high load carrying capacity and anti-friction characteristics combine to offer superior performance in gears, suitable for enclosed industrial gear systems using steel spur and helical gears as well as bearings and other components in circulating and splash-lubricated systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An extreme-pressure industrial gear oil from Shell’s Omala S2 GX range at ISO VG 68; approved by Siemens for Flender gearboxes and helical, bevel and planetary gear units, and by many other equipment manufacturers, suitable for a wide range of enclosed industrial gearboxes used in general manufacturing, mining, steel, power, paper, auto components and cement industries.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An extreme-pressure industrial gear oil from Shell’s Omala S2 GX range at ISO VG 100; approved by Siemens for Flender gearboxes and helical, bevel and planetary gear units, and by many other equipment manufacturers, suitable for a wide range of enclosed industrial gearboxes used in general manufacturing, mining, steel, power, paper, auto components and cement industries.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An extreme-pressure industrial gear oil from Shell’s Omala S2 GX range at ISO VG 150; approved by Siemens for Flender gearboxes and helical, bevel and planetary gear units, and by many other equipment manufacturers, suitable for a wide range of enclosed industrial gearboxes used in general manufacturing, mining, steel, power, paper, auto components and cement industries.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An extreme-pressure industrial gear oil from Shell’s Omala S2 GX range at ISO VG 220; approved by Siemens for Flender gearboxes and helical, bevel and planetary gear units, and by many other equipment manufacturers, suitable for a wide range of enclosed industrial gearboxes used in general manufacturing, mining, steel, power, paper, auto components and cement industries.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An extreme-pressure industrial gear oil from Shell’s Omala S2 GX range at ISO VG 320; approved by Siemens for Flender gearboxes and helical, bevel and planetary gear units, and by many other equipment manufacturers, suitable for a wide range of enclosed industrial gearboxes used in general manufacturing, mining, steel, power, paper, auto components and cement industries.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An extreme-pressure industrial gear oil from Shell’s Omala S2 GX range at ISO VG 460; approved by Siemens for Flender gearboxes and helical, bevel and planetary gear units, and by many other equipment manufacturers, suitable for a wide range of enclosed industrial gearboxes used in general manufacturing, mining, steel, power, paper, auto components and cement industries.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An extreme-pressure industrial gear oil from Shell’s Omala S2 GX range at ISO VG 680; approved by Siemens for Flender gearboxes and helical, bevel and planetary gear units, and by many other equipment manufacturers, suitable for a wide range of enclosed industrial gearboxes used in general manufacturing, mining, steel, power, paper, auto components and cement industries.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An extreme-pressure industrial gear oil from Shell’s Omala S2 GX range at ISO VG 1000; approved by Siemens for Flender gearboxes and helical, bevel and planetary gear units, and by many other equipment manufacturers, suitable for a wide range of enclosed industrial gearboxes used in general manufacturing, mining, steel, power, paper, auto components and cement industries.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An industrial gear oil from Shell’s Omala S3 GP range at ISO VG 220, providing extra load protection for industrial gears; designed to help solve problems associated with worn, misaligned and contaminated gears, and to help prevent foaming and water contamination which can reduce gear performance under extreme pressure and contaminated conditions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An industrial gear oil from Shell’s Omala S3 GP range at ISO VG 320, providing extra load protection for industrial gears; designed to help solve problems associated with worn, misaligned and contaminated gears, and to help prevent foaming and water contamination which can reduce gear performance under extreme pressure and contaminated conditions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An industrial gear oil from Shell’s Omala S3 GP range at ISO VG 460, providing extra load protection for industrial gears; designed to help solve problems associated with worn, misaligned and contaminated gears, and to help prevent foaming and water contamination which can reduce gear performance under extreme pressure and contaminated conditions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An industrial gear oil from Shell’s Omala S3 GP range at ISO VG 680, providing extra load protection for industrial gears; designed to help solve problems associated with worn, misaligned and contaminated gears, and to help prevent foaming and water contamination which can reduce gear performance under extreme pressure and contaminated conditions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An industrial gear oil from Shell’s Omala S3 GP range at ISO VG 1500, providing extra load protection for industrial gears; designed to help solve problems associated with worn, misaligned and contaminated gears, and to help prevent foaming and water contamination which can reduce gear performance under extreme pressure and contaminated conditions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A synthetic, biodegradable industrial gear lubricant from Shell’s Omala S3 W range at ISO VG 100, for enclosed industrial gears including worm gears; designed for applications such as dockside and marine mobile equipment, forestry, wind turbines and other industrial operations where spills into water require an environmentally appropriate lubricant; rated as “anti-wear (AW)” according to ASTM D7043 and FZG testing.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A synthetic, biodegradable industrial gear lubricant from Shell’s Omala S3 W range at ISO VG 150, for enclosed industrial gears including worm gears; designed for applications such as dockside and marine mobile equipment, forestry, wind turbines and other industrial operations where spills into water require an environmentally appropriate lubricant; rated as “anti-wear (AW)” according to ASTM D7043 and FZG testing.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A synthetic, biodegradable industrial gear lubricant from Shell’s Omala S3 W range at ISO VG 220, for enclosed industrial gears including worm gears; designed for applications such as dockside and marine mobile equipment, forestry, wind turbines and other industrial operations where spills into water require an environmentally appropriate lubricant; rated as “anti-wear (AW)” according to ASTM D7043 and FZG testing.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance gear system lubricant from Shell’s Omala range, specifically for the wind energy sector; specifically designed to operate efficiently at low temperatures, ensuring excellent wear protection even in cold conditions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced synthetic industrial gear oil from Shell’s Omala S4 GX range at ISO VG 150, formulated to have excellent load carrying capacity and micro-pitting performance providing long component life even under shock loading conditions; this performance is recognized by Flender AG where a formal approval for 20,000 hours (four years) at 80°C usage has been granted.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced synthetic industrial gear oil from Shell’s Omala S4 GX range at ISO VG 220, formulated to have excellent load carrying capacity and micro-pitting performance providing long component life even under shock loading conditions; this performance is recognized by Flender AG where a formal approval for 20,000 hours (four years) at 80°C usage has been granted.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced synthetic industrial gear oil from Shell’s Omala S4 GX range at ISO VG 460, formulated to have excellent load carrying capacity and micro-pitting performance providing long component life even under shock loading conditions; this performance is recognized by Flender AG where a formal approval for 20,000 hours (four years) at 80°C usage has been granted.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced synthetic industrial gear oil from Shell’s Omala S4 GX range at ISO VG 680, formulated to have excellent load carrying capacity and micro-pitting performance providing long component life even under shock loading conditions; this performance is recognized by Flender AG where a formal approval for 20,000 hours (four years) at 80°C usage has been granted.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced, versatile synthetic industrial gear oil from Shell’s Omala S4 GXV range at ISO VG 68; approved by Siemens MD for Flender gear units and gear motors, and approved for wind turbine gearboxes by Gamesa, Dongfang Wind Turbines, Dalian Heavy Industries and Sinovel; suitable for wind turbines and other hard-to-reach installations, enclosed industrial gear systems operating under severe conditions, and bearings in circulating or splash-lubricated systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced, versatile synthetic industrial gear oil from Shell’s Omala S4 GXV range at ISO VG 150; approved by Siemens MD for Flender gear units and gear motors, and approved for wind turbine gearboxes by Gamesa, Dongfang Wind Turbines, Dalian Heavy Industries and Sinovel; suitable for wind turbines and other hard-to-reach installations, enclosed industrial gear systems operating under severe conditions, and bearings in circulating or splash-lubricated systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced, versatile synthetic industrial gear oil from Shell’s Omala S4 GXV range at ISO VG 220; approved by Siemens MD for Flender gear units and gear motors, and approved for wind turbine gearboxes by Gamesa, Dongfang Wind Turbines, Dalian Heavy Industries and Sinovel; suitable for wind turbines and other hard-to-reach installations, enclosed industrial gear systems operating under severe conditions, and bearings in circulating or splash-lubricated systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced, versatile synthetic industrial gear oil from Shell’s Omala S4 GXV range at ISO VG 320; approved by Siemens MD for Flender gear units and gear motors, and approved for wind turbine gearboxes by Gamesa, Dongfang Wind Turbines, Dalian Heavy Industries and Sinovel; suitable for wind turbines and other hard-to-reach installations, enclosed industrial gear systems operating under severe conditions, and bearings in circulating or splash-lubricated systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced, versatile synthetic industrial gear oil from Shell’s Omala S4 GXV range at ISO VG 460; approved by Siemens MD for Flender gear units and gear motors, and approved for wind turbine gearboxes by Gamesa, Dongfang Wind Turbines, Dalian Heavy Industries and Sinovel; suitable for wind turbines and other hard-to-reach installations, enclosed industrial gear systems operating under severe conditions, and bearings in circulating or splash-lubricated systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced, versatile synthetic industrial gear oil from Shell’s Omala S4 GXV range at ISO VG 680; approved by Siemens MD for Flender gear units and gear motors, and approved for wind turbine gearboxes by Gamesa, Dongfang Wind Turbines, Dalian Heavy Industries and Sinovel; suitable for wind turbines and other hard-to-reach installations, enclosed industrial gear systems operating under severe conditions, and bearings in circulating or splash-lubricated systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced, versatile synthetic industrial gear oil from Shell’s Omala S4 GXV range at ISO VG 1000; approved by Siemens MD for Flender gear units and gear motors, and approved for wind turbine gearboxes by Gamesa, Dongfang Wind Turbines, Dalian Heavy Industries and Sinovel; suitable for wind turbines and other hard-to-reach installations, enclosed industrial gear systems operating under severe conditions, and bearings in circulating or splash-lubricated systems.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced synthetic heavy duty industrial worm drive gear oil from Shell’s Omala S4 WE range (previous name: Shell Tivela S) at ISO VG 150, formulated using specially selected polyalkylene glycol base fluids and additives; offers outstanding lubrication performance under severe operating conditions, including improved energy efficiency, long service life and high resistance to micro-pitting; particularly recommended for systems where maintenance is infrequent or systems are inaccessible (e.g. yaw gears in wind turbine installations).
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced synthetic heavy duty industrial worm drive gear oil from Shell’s Omala S4 WE range (previous name: Shell Tivela S) at ISO VG 220, formulated using specially selected polyalkylene glycol base fluids and additives; offers outstanding lubrication performance under severe operating conditions, including improved energy efficiency, long service life and high resistance to micro-pitting; particularly recommended for systems where maintenance is infrequent or systems are inaccessible (e.g. yaw gears in wind turbine installations).
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced synthetic heavy duty industrial worm drive gear oil from Shell’s Omala S4 WE range (previous name: Shell Tivela S) at ISO VG 320, formulated using specially selected polyalkylene glycol base fluids and additives; offers outstanding lubrication performance under severe operating conditions, including improved energy efficiency, long service life and high resistance to micro-pitting; particularly recommended for systems where maintenance is infrequent or systems are inaccessible (e.g. yaw gears in wind turbine installations).
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced synthetic heavy duty industrial worm drive gear oil from Shell’s Omala S4 WE range (previous name: Shell Tivela S) at ISO VG 460, formulated using specially selected polyalkylene glycol base fluids and additives; offers outstanding lubrication performance under severe operating conditions, including improved energy efficiency, long service life and high resistance to micro-pitting; particularly recommended for systems where maintenance is infrequent or systems are inaccessible (e.g. yaw gears in wind turbine installations).
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced synthetic heavy duty industrial worm drive gear oil from Shell’s Omala S4 WE range (previous name: Shell Tivela S) at ISO VG 680, formulated using specially selected polyalkylene glycol base fluids and additives; offers outstanding lubrication performance under severe operating conditions, including improved energy efficiency, long service life and high resistance to micro-pitting; particularly recommended for systems where maintenance is infrequent or systems are inaccessible (e.g. yaw gears in wind turbine installations).
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A specialty gear oil from Shell’s Omala S4 Wheel range at ISO VG 220, formulated specifically for the wheel motor drives on heavy mining trucks; part of Shell’s comprehensive Omala industrial gear oil portfolio, optimised for a wide range of gear types and applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A specialty gear oil from Shell’s Omala S4 Wheel range at ISO VG 320, formulated specifically for the wheel motor drives on heavy mining trucks; part of Shell’s comprehensive Omala industrial gear oil portfolio, optimised for a wide range of gear types and applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A specialty gear oil from Shell’s Omala S4 Wheel range at ISO VG 460, formulated specifically for the wheel motor drives on heavy mining trucks; part of Shell’s comprehensive Omala industrial gear oil portfolio, optimised for a wide range of gear types and applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A specialty gear oil from Shell’s Omala S4 Wheel range at ISO VG 680, formulated specifically for the wheel motor drives on heavy mining trucks; part of Shell’s comprehensive Omala industrial gear oil portfolio, optimised for a wide range of gear types and applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A fully synthetic gear oil and Shell’s most technologically advanced product for wind turbines, from the Omala S5 Wind range at ISO VG 320; specifically designed to operate efficiently at low temperatures, offering extended oil life and maintenance intervals for wind turbines; recommended for wind turbine main gear drives.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance multigrade, extreme-pressure, multipurpose gear lubricant from Shell’s Spirax HD range at SAE 80W-90, suitable for heavy-duty and conventional truck and automotive differentials, manual transmissions and oil lubricated wheel bearings; meets the requirements of API GL-5 and MIL-PRF-2105E; contains a sulfur/phosphorus additive system for excellent load carrying capacity plus inhibitors against oxidation, corrosion, rust and foaming.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance multigrade, extreme-pressure, multipurpose gear lubricant from Shell’s Spirax HD range at SAE 85W-140, suitable for heavy-duty and conventional truck and automotive differentials, manual transmissions and oil lubricated wheel bearings; meets the requirements of API GL-5 and MIL-PRF-2105E; contains a sulfur/phosphorus additive system for excellent load carrying capacity plus inhibitors against oxidation, corrosion, rust and foaming.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An extreme-pressure lubricant from Shell’s Spirax MB range at SAE 90, containing multi-functional additives which impart good anti-wear, oxidation stability and anti-rust characteristics; suitable for a variety of industrial and automotive gears.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high quality automotive transmission, power steering and hydraulic oil from Shell’s Spirax S1 ATF range (previous name: Shell Donax TM), mainly used for heavy-duty vehicles working in an ‘off-road’ environment; for powershift and industrial torque converters and applications calling for a GM Type ‘A’ Suffix ‘A’ performance fluid.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A quality automatic transmission fluid from Shell’s Spirax S1 ATF range, specially formulated to meet the lubrication requirements of specific automatic transmission units, power steering systems and hydraulic systems; based on a blend of high viscosity index oils and proven additives, to provide protection in units requiring a non-friction fluid; meets Ford Specification ESW-M2C33-G.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An automotive axle oil from Shell’s Spirax S2 A range at SAE 80W-90, blended for use in a wide variety of automotive axle units subjected to heavy duty conditions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An automotive axle oil from Shell’s Spirax S2 A range at SAE 85W-140, blended for use in a wide variety of automotive axle units subjected to heavy duty conditions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A proven performance axle oil from Shell’s Spirax S2 ALS range at SAE 90, designed for automotive limited slip differentials.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A proven performance automatic transmission fluid from Shell’s Spirax S2 ATF range, designed for Allison transmissions meeting the TES 389 specification.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A proven performance automatic transmission fluid from Shell’s Spirax S2 ATF range, designed for MAN, Voith and ZF transmissions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A proven performance automatic transmission fluid from Shell’s Spirax S2 ATF range, meeting the Dexron® IID standard.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A fit-for-purpose SAE 15W-30 universal tractor transmission oil (UTTO) from Shell’s Spirax S2 TQ range, meeting major manufacturers’ requirements and reducing brake noise.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A proven performance, ZF-approved axle oil from Shell’s Spirax S3 ALS range at SAE 80W-90, for limited slip differentials.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A proven performance, ZF-approved axle oil from Shell’s Spirax S3 ALS range at SAE 85W-140, for limited slip differentials.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A proven performance, ZF-approved axle oil from Shell’s Spirax S3 ALS range at SAE 85W-90, for limited slip differentials.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A true universal driveline oil from Shell’s Spirax S3 AM range at SAE 80W-90, designed for use in modern heavy duty axles and gearboxes offering the convenience of one transmission oil for the whole driveline; specially optimised mineral base oils and new additive technology improve lubrication of the drive train and potentially extend oil drain intervals; for OEMs such as MAN, ZF, MACK and Scania.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A proven performance GL-5 axle oil from Shell’s Spirax S3 AS range at SAE 80W-140, for Scania and ZF.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A proven performance automatic transmission fluid from Shell’s Spirax S3 ATF range, meeting Dexron® III and Mercon® standards.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high performance, API GL-5 gear and axle oil from Shell’s Spirax S3 AX range at SAE 80W-90, for moderate to heavily loaded on and off-road driveline applications; reduced friction for improved efficiency.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high performance, API GL-5 gear and axle oil from Shell’s Spirax S3 AX range at SAE 85W-140, for moderate to heavily loaded on and off-road driveline applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A proven performance gearbox oil from Shell’s Spirax S3 G range at SAE 80W, meeting API GL-4 and key manufacturers’ specifications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium-performance SAE 15W-40 super tractor oil universal (STOU) from Shell’s Spirax S3 T range, meeting major manufacturers’ requirements (including Fendt Vario).
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A specially friction-modified universal tractor transmission oil (UTTO) from Shell’s Spirax S3 TLV range at SAE 5W-20, designed for use in transmission, differential, hydraulic and oil immersed brakes as well as power takeoff systems in agricultural tractors and off-road equipment; provides noise-free oil immersed (wet) brake performance combined with reliable, trouble-free operation.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A part-synthetic, superior quality automotive gear lubricant from Shell’s Spirax S4 AT range at SAE 75W-90, specially designed for use in gearboxes and axles.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A superior quality automatic transmission fluid from Shell’s Spirax S4 ATF range (previous name: Shell Donax TX) based on synthetic technology, suitable for a wide range of heavy duty automotive transport and passenger car transmissions; the ultimate performance automatic transmission fluid allowing extended drain intervals even under the most severe conditions; approved under Mercedes-Benz specification sheet 236.9.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance off-highway transmission and hydraulic oil from Shell’s Spirax S4 CX range (previous name: Shell Donax TC 10W) at SAE 10W, meeting the demanding requirements of modern transmission, oil-immersed brake and hydraulic systems fitted to heavy-duty off-highway equipment; for manufacturers such as Caterpillar, Komatsu and Komatsu-Dresser, and transmissions by Eaton, Eaton Fuller, ZF, Dana and Rockwell.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high performance off-highway transmission and final drive oil from Shell’s Spirax S4 CX range at SAE 30, recommended for use in heavy duty off-highway equipment produced by the world’s leading manufacturers including Caterpillar and Komatsu.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high performance off-highway transmission and final drive oil from Shell’s Spirax S4 CX range (previous name: Shell Donax TC 50) at SAE 50, meeting the demanding requirements of modern transmission, final drive, and oil immersed brakes fitted to heavy-duty off-highway equipment; for Caterpillar, Komatsu, Komatsu-Dresser and transmissions by Eaton, Eaton Fuller, ZF, Dana, Rockwell.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An automotive gearbox oil from Shell’s Spirax S4 G range at SAE 75W-90, meeting API GL-4 and Volkswagen VW TL 50150 / VW 501.50 specifications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance super tractor oil universal (STOU) from Shell’s Spirax S4 TX range, based on Shell’s XHVI base oil; improved protection, fuel efficiency, less maintenance and wider application, meeting major manufacturers’ requirements.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium synthetic gearbox oil from Shell’s Spirax S5 ATE range at SAE 75W-90, GL-4/5, particularly designed to fulfil the highest requirements of extremely loaded passenger car drive train systems; particularly for heavily loaded “transaxle” transmissions where hypoid axle and gearbox are in the same housing, recognised and used as initial and service fill gear oil by leading sports car manufacturers.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An exceptional performance, versatile application automatic transmission fluid from Shell’s Spirax S5 ATF range; approved by Aisin JWS 3309 (all applications), Allison C4, and Ford Mercon® specifications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium performance automatic transmission fluid from Shell’s Spirax S6 ATF range, designed for Mercedes-Benz 5- and 7-speed automatic and NAG2VSport transmissions; meets MB-Approval 236.14.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A fully synthetic, heavy-duty automatic transmission fluid from Shell’s Spirax S6 ATF range, specifically designed and approved for use in transmissions requiring Allison TES-295 fluids; approved for extended service intervals and remains stable even under severe operating conditions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium performance automatic transmission fluid from Shell’s Spirax S6 ATF range, meeting the Dexron® VI standard and General Motors GMN10060 specification; approved by major manufacturers.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium technology automatic transmission fluid from Shell’s Spirax S6 ATF range, designed for the latest generation of Mercedes-Benz 9-speed automatic transmissions (9G-Tronic); developed as an initial-fill and service-fill fluid for this generation of fuel-economy optimised transmissions, and must not be used in older Mercedes-Benz 5- and 7-speed automatic transmissions requiring MB-Approvals 236.10, 236.12, 236.14 or 236.15.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A fully synthetic, premium quality, heavy-duty automatic transmission fluid from Shell’s Spirax S6 ATF range, specifically designed in partnership with ZF as an exclusive lubricant for the newest generation of ZF-Ecomat and ZF-Ecolife transmissions; reliable for 150,000km or three years even under severe conditions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A unique fuel-efficient, long life transmission and axle oil from Shell’s Spirax S6 AXME range at SAE 75W-90, designed to provide ultimate protection to the latest heavy duty manual transmissions and axles; specially formulated with synthetic base oils and additive technology unique to Shell, gives improved lubrication of the drive train; extended oil drain capable and approved by several OEMs.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A fully synthetic, multipurpose, heavy-duty gear lubricant from Shell’s Spirax S6 AXME range at SAE 80W-140, specifically designed for heavy duty differentials that call for an API GL-5 type product.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high performance off-highway transmission oil from Shell’s Spirax S6 CXME range at SAE 10W-40, designed to provide operators with trouble free operation and maximum reliability; meets the demanding requirements of modern transmission, differential gears, final drive, oil immersed brake, reduction gears and hydraulic systems fitted to heavy-duty off-highway equipment in all climates.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A synthetic heavy-duty transmission fluid from Shell’s Spirax S6 GME range (previous name: Shell Spirax GSX 50) at SAE 50, specially formulated for extended drain and severe service applications; approved as a Roadranger® Genuine Lubricant for use in Eaton extended warranty transmission service; contains an effective anti-wear system along with corrosion and oxidation inhibitors that protect system components and help achieve longer transmission life.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A unique fuel-efficient, long-life gear oil from Shell’s Spirax S6 GXME range at SAE 75W-80, designed to give the ultimate in performance and protection to meet the requirements of current and future heavy duty gearboxes; specially formulated fully synthetic base oils plus a unique new additive technology give improved lubrication and longer life for equipment.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance SAE 10W-30 universal tractor transmission oil (UTTO) from Shell’s Spirax S6 TXME range, approved by major manufacturers and meeting the latest specifications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Tellus S2” range; an anti-wear industrial hydraulic oil at ISO VG 22, for a wide range of industrial and mobile hydraulic systems. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Tellus S2” range; an anti-wear industrial hydraulic oil at ISO VG 32, for a wide range of industrial and mobile hydraulic systems. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Tellus S2” range; an anti-wear industrial hydraulic oil at ISO VG 37, for a wide range of industrial and mobile hydraulic systems. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Tellus S2” range; an anti-wear industrial hydraulic oil at ISO VG 46, for a wide range of industrial and mobile hydraulic systems. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Tellus S2” range; an anti-wear industrial hydraulic oil at ISO VG 68, for a wide range of industrial and mobile hydraulic systems. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Tellus S2” range; an anti-wear industrial hydraulic oil at ISO VG 100, for a wide range of industrial and mobile hydraulic systems. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Tellus S2” range; an anti-wear industrial hydraulic oil at ISO VG 150, for a wide range of industrial and mobile hydraulic systems. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A zinc-free hydraulic fluid from Shell’s Tellus Arctic range (the predecessor name for the product now marketed as Shell Tellus S4 VX 32) at ISO VG 32, designed especially for use in outdoor equipment, like mining and forestry machinery, operating at very low temperatures.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance hydraulic oil from Shell’s Tellus EE range at ISO VG 22, specifically designed to improve the energy efficiency of the machinery in which it is used; contains a unique and patented additive technology that has demonstrated an average energy cost reduction of up to 8% in laboratory tests and field trials.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance hydraulic oil from Shell’s Tellus EE range at ISO VG 32, specifically designed to improve the energy efficiency of the machinery in which it is used; contains a unique and patented additive technology that has demonstrated an average energy cost reduction of up to 8% in laboratory tests and field trials.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance hydraulic oil from Shell’s Tellus EE range at ISO VG 46, specifically designed to improve the energy efficiency of the machinery in which it is used; contains a unique and patented additive technology that has demonstrated an average energy cost reduction of up to 8% in laboratory tests and field trials.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance hydraulic oil from Shell’s Tellus EE range at ISO VG 68, specifically designed to improve the energy efficiency of the machinery in which it is used; contains a unique and patented additive technology that has demonstrated an average energy cost reduction of up to 8% in laboratory tests and field trials.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An anti-wear industrial hydraulic oil from Shell’s Tellus S range at ISO VG 22, approved by Denison Hydraulics, Eaton (Vickers), Cincinnati Machine and many other equipment manufacturers; meets ISO 11158, DIN 51524-3 and ASTM D6158 standards.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An anti-wear industrial hydraulic oil from Shell’s Tellus S range at ISO VG 32, approved by Denison Hydraulics, Eaton (Vickers), Cincinnati Machine and many other equipment manufacturers; meets ISO 11158, DIN 51524-3 and ASTM D6158 standards.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An anti-wear industrial hydraulic oil from Shell’s Tellus S range at ISO VG 46, approved by Denison Hydraulics, Eaton (Vickers), Cincinnati Machine and many other equipment manufacturers; meets ISO 11158, DIN 51524-3 and ASTM D6158 standards.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An anti-wear industrial hydraulic oil from Shell’s Tellus S range at ISO VG 100, approved by Denison Hydraulics, Eaton (Vickers), Cincinnati Machine and many other equipment manufacturers; meets ISO 11158, DIN 51524-3 and ASTM D6158 standards.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An anti-wear industrial hydraulic oil from Shell’s Tellus S range at ISO VG 68, approved by Denison Hydraulics, Eaton (Vickers), Cincinnati Machine and many other equipment manufacturers; meets ISO 11158, DIN 51524-3 and ASTM D6158 standards.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A quality anti-wear hydraulic fluid from Shell’s Tellus S1 M range (previous name: Shell Hydrau HM) at ISO VG 32, providing cost effective and reliable protection and good performance for most industrial applications under normal operating conditions; suitable for applications under mild or normal conditions where temperature changes and filtration requirements are moderate.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A quality anti-wear hydraulic fluid from Shell’s Tellus S1 M range (previous name: Shell Hydrau HM) at ISO VG 46, providing cost effective and reliable protection and good performance for most industrial applications under normal operating conditions; suitable for applications under mild or normal conditions where temperature changes and filtration requirements are moderate.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A quality anti-wear hydraulic fluid from Shell’s Tellus S1 M range (previous name: Shell Hydrau HM) at ISO VG 68, providing cost effective and reliable protection and good performance for most industrial applications under normal operating conditions; suitable for applications under mild or normal conditions where temperature changes and filtration requirements are moderate.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high performance hydraulic fluid from Shell’s Tellus S2 M range (previous name: Shell Tellus Oils) at ISO VG 22, using Shell’s unique patented technology to provide outstanding protection and performance in most manufacturing and many mobile equipment operations; resists breakdown under heat or mechanical stress and helps prevent damaging deposit formation.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high performance hydraulic fluid from Shell’s Tellus S2 M range (previous name: Shell Tellus Oils) at ISO VG 32, using Shell’s unique patented technology to provide outstanding protection and performance in most manufacturing and many mobile equipment operations; resists breakdown under heat or mechanical stress and helps prevent damaging deposit formation.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high performance hydraulic fluid from Shell’s Tellus S2 M range (previous name: Shell Tellus Oils) at ISO VG 100, using Shell’s unique patented technology to provide outstanding protection and performance in most manufacturing and many mobile equipment operations; resists breakdown under heat or mechanical stress and helps prevent damaging deposit formation.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high performance detergent-based hydraulic fluid from Shell’s Tellus S2 VA range at ISO VG 46, designed for use where emulsifiable fluids are preferred and water tolerance is required; meets DIN 51502, ISO 6743/4, ISO 11158 and ASTM 6158-05 standards.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance hydraulic fluid from Shell’s Tellus S2 VX range at ISO VG 15, based on Group II base oils that provide outstanding protection and performance across a wide range of temperatures; resists breakdown under heat or mechanical stress and is ideally suited to most mobile equipment and other applications subjected to a wider range of ambient or operating temperatures.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance hydraulic fluid from Shell’s Tellus S2 VX range at ISO VG 22, based on Group II base oils that provide outstanding protection and performance across a wide range of temperatures; resists breakdown under heat or mechanical stress and is ideally suited to most mobile equipment and other applications subjected to a wider range of ambient or operating temperatures.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance hydraulic fluid from Shell’s Tellus S2 VX range at ISO VG 32, based on Group II base oils that provide outstanding protection and performance across a wide range of temperatures; resists breakdown under heat or mechanical stress and is ideally suited to most mobile equipment and other applications subjected to a wider range of ambient or operating temperatures.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance hydraulic fluid from Shell’s Tellus S2 VX range at ISO VG 46, based on Group II base oils that provide outstanding protection and performance across a wide range of temperatures; resists breakdown under heat or mechanical stress and is ideally suited to most mobile equipment and other applications subjected to a wider range of ambient or operating temperatures.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance hydraulic fluid from Shell’s Tellus S2 VX range at ISO VG 68, based on Group II base oils that provide outstanding protection and performance across a wide range of temperatures; resists breakdown under heat or mechanical stress and is ideally suited to most mobile equipment and other applications subjected to a wider range of ambient or operating temperatures.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high-performance hydraulic fluid from Shell’s Tellus S2 VX range at ISO VG 100, based on Group II base oils that provide outstanding protection and performance across a wide range of temperatures; resists breakdown under heat or mechanical stress and is ideally suited to most mobile equipment and other applications subjected to a wider range of ambient or operating temperatures.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An ashless industrial hydraulic oil from Shell’s Tellus S3 M range at ISO VG 22, offering long life and improved protection for industrial applications; approved by Denison Hydraulics, Eaton (Vickers), Cincinnati Machine and many other equipment manufacturers; meets ISO 11158, DIN 51524-3 and ASTM D6158 standards.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An ashless industrial hydraulic oil from Shell’s Tellus S3 M range at ISO VG 32, offering long life and improved protection for industrial applications; approved by Denison Hydraulics, Eaton (Vickers), Cincinnati Machine and many other equipment manufacturers; meets ISO 11158, DIN 51524-3 and ASTM D6158 standards.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An ashless industrial hydraulic oil from Shell’s Tellus S3 M range at ISO VG 46, offering long life and improved protection for industrial applications; approved by Denison Hydraulics, Eaton (Vickers), Cincinnati Machine and many other equipment manufacturers; meets ISO 11158, DIN 51524-3 and ASTM D6158 standards.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An ashless industrial hydraulic oil from Shell’s Tellus S3 M range at ISO VG 68, offering long life and improved protection for industrial applications; approved by Denison Hydraulics, Eaton (Vickers), Cincinnati Machine and many other equipment manufacturers; meets ISO 11158, DIN 51524-3 and ASTM D6158 standards.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An ashless industrial hydraulic oil from Shell’s Tellus S3 M range at ISO VG 100, offering long life and improved protection for industrial applications; approved by Denison Hydraulics, Eaton (Vickers), Cincinnati Machine and many other equipment manufacturers; meets ISO 11158, DIN 51524-3 and ASTM D6158 standards.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A hydraulic fluid using exclusive ashless technology from Shell’s Tellus S3 V range at ISO VG 32, coupled with highly shear-stable viscosity modifiers; gives excellent viscosity control and protection under severe mechanical, thermal and chemical stresses across a wide range of temperatures, providing outstanding protection and performance in most mobile equipment and other applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A hydraulic fluid using exclusive ashless technology from Shell’s Tellus S3 V range at ISO VG 46, coupled with highly shear-stable viscosity modifiers; gives excellent viscosity control and protection under severe mechanical, thermal and chemical stresses across a wide range of temperatures, providing outstanding protection and performance in most mobile equipment and other applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A hydraulic fluid using exclusive ashless technology from Shell’s Tellus S3 V range at ISO VG 68, coupled with highly shear-stable viscosity modifiers; gives excellent viscosity control and protection under severe mechanical, thermal and chemical stresses across a wide range of temperatures, providing outstanding protection and performance in most mobile equipment and other applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A synthetic, ashless hydraulic oil from Shell’s Tellus S4 ME range at ISO VG 22, offering extra long life and energy saving; approved by Denison Hydraulics, Cincinnati Machine, Eaton (Vickers), Bosch Rexroth and many other equipment manufacturers; meets ASTM D6158, ISO 11158 and DIN 51524-2 standards.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A synthetic, ashless hydraulic oil from Shell’s Tellus S4 ME range at ISO VG 32, offering extra long life and energy saving; approved by Denison Hydraulics, Cincinnati Machine, Eaton (Vickers), Bosch Rexroth and many other equipment manufacturers; meets ASTM D6158, ISO 11158 and DIN 51524-2 standards.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A synthetic, ashless hydraulic oil from Shell’s Tellus S4 ME range at ISO VG 46, offering extra long life and energy saving; approved by Denison Hydraulics, Cincinnati Machine, Eaton (Vickers), Bosch Rexroth and many other equipment manufacturers; meets ASTM D6158, ISO 11158 and DIN 51524-2 standards.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A synthetic, ashless hydraulic oil from Shell’s Tellus S4 ME range at ISO VG 68, offering extra long life and energy saving; approved by Denison Hydraulics, Cincinnati Machine, Eaton (Vickers), Bosch Rexroth and many other equipment manufacturers; meets ASTM D6158, ISO 11158 and DIN 51524-2 standards.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced hydraulic fluid technology from Shell’s Tellus S4 VX range (previous name: Shell Tellus Arctic) at ISO VG 32, designed for use in applications subjected to extremely low ambient temperatures such as arctic or exposed areas; approved by Komatsu Mining, Komatsu and DIETZ automation (servo valve and proportional valve test equipment).
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A very high viscosity index hydraulic oil from Shell’s Tellus STX range (the predecessor name for the product now marketed as Shell Tellus S3 V) at ISO VG 32, with a viscosity index of 162; approved by Cincinnati, Denison and Eaton (Vickers), meeting the Swedish Standard SS 15 54 34 AM.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A very high viscosity index hydraulic oil from Shell’s Tellus STX range (the predecessor name for the product now marketed as Shell Tellus S3 V) at ISO VG 46, with a viscosity index of 162; approved by Cincinnati, Denison and Eaton (Vickers), meeting the Swedish Standard SS 15 54 34 AM.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A very high viscosity index hydraulic oil from Shell’s Tellus STX range (the predecessor name for the product now marketed as Shell Tellus S3 V) at ISO VG 68, with a viscosity index of 162; approved by Cincinnati, Denison and Eaton (Vickers), meeting the Swedish Standard SS 15 54 34 AM.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An anti-wear hydraulic oil from Shell’s Tellus Oils T range at ISO VG 15, approved by Cincinnati (P-68/P-70/P-69), Denison (HF-0/HF-1/HF-2) and Eaton (Vickers) (M-2950 S/I-286 S); meets Swedish Standard SS 15 54 34 AM, ISO 11158 and AFNOR NF-E 48-603; good water separation properties (demulsibility) that resist the formation of water-in-oil emulsions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An anti-wear hydraulic oil from Shell’s Tellus Oils T range at ISO VG 22, approved by Cincinnati (P-68/P-70/P-69), Denison (HF-0/HF-1/HF-2) and Eaton (Vickers) (M-2950 S/I-286 S); meets Swedish Standard SS 15 54 34 AM, ISO 11158 and AFNOR NF-E 48-603; good water separation properties (demulsibility) that resist the formation of water-in-oil emulsions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An anti-wear hydraulic oil from Shell’s Tellus Oils T range at ISO VG 32, approved by Cincinnati (P-68/P-70/P-69), Denison (HF-0/HF-1/HF-2) and Eaton (Vickers) (M-2950 S/I-286 S); meets Swedish Standard SS 15 54 34 AM, ISO 11158 and AFNOR NF-E 48-603; good water separation properties (demulsibility) that resist the formation of water-in-oil emulsions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An anti-wear hydraulic oil from Shell’s Tellus Oils T range at ISO VG 37, approved by Cincinnati (P-68/P-70/P-69), Denison (HF-0/HF-1/HF-2) and Eaton (Vickers) (M-2950 S/I-286 S); meets Swedish Standard SS 15 54 34 AM, ISO 11158 and AFNOR NF-E 48-603; good water separation properties (demulsibility) that resist the formation of water-in-oil emulsions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An anti-wear hydraulic oil from Shell’s Tellus Oils T range at ISO VG 46, approved by Cincinnati (P-68/P-70/P-69), Denison (HF-0/HF-1/HF-2) and Eaton (Vickers) (M-2950 S/I-286 S); meets Swedish Standard SS 15 54 34 AM, ISO 11158 and AFNOR NF-E 48-603; good water separation properties (demulsibility) that resist the formation of water-in-oil emulsions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An anti-wear hydraulic oil from Shell’s Tellus Oils T range at ISO VG 68, approved by Cincinnati (P-68/P-70/P-69), Denison (HF-0/HF-1/HF-2) and Eaton (Vickers) (M-2950 S/I-286 S); meets Swedish Standard SS 15 54 34 AM, ISO 11158 and AFNOR NF-E 48-603; good water separation properties (demulsibility) that resist the formation of water-in-oil emulsions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An anti-wear hydraulic oil from Shell’s Tellus Oils T range at ISO VG 100, approved by Cincinnati (P-68/P-70/P-69), Denison (HF-0/HF-1/HF-2) and Eaton (Vickers) (M-2950 S/I-286 S); meets Swedish Standard SS 15 54 34 AM, ISO 11158 and AFNOR NF-E 48-603; good water separation properties (demulsibility) that resist the formation of water-in-oil emulsions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high detergency hydraulic oil from Shell’s Tellus TD range at ISO VG 68; part of Shell’s official Tellus hierarchy, which also includes plain Tellus, Tellus S, Tellus T, Tellus TX (extra-low-wear) and Tellus DO (premium detergent).
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium extra-low-wear hydraulic oil from Shell’s Tellus TX range at ISO VG 15, viscosity index 160; a step up from standard Tellus T with an enhanced ZnDTP-based additive package for extreme-pressure (EP) performance and class-leading shear stability.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium extra-low-wear hydraulic oil from Shell’s Tellus TX range at ISO VG 22, viscosity index 160; a step up from standard Tellus T with an enhanced ZnDTP-based additive package for extreme-pressure (EP) performance and class-leading shear stability.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium extra-low-wear hydraulic oil from Shell’s Tellus TX range at ISO VG 32, viscosity index 160; a step up from standard Tellus T with an enhanced ZnDTP-based additive package for extreme-pressure (EP) performance and class-leading shear stability.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium extra-low-wear hydraulic oil from Shell’s Tellus TX range at ISO VG 46, viscosity index 160; a step up from standard Tellus T with an enhanced ZnDTP-based additive package for extreme-pressure (EP) performance and class-leading shear stability.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium extra-low-wear hydraulic oil from Shell’s Tellus TX range at ISO VG 68, viscosity index 160; a step up from standard Tellus T with an enhanced ZnDTP-based additive package for extreme-pressure (EP) performance and class-leading shear stability.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium extra-low-wear hydraulic oil from Shell’s Tellus TX range at ISO VG 100, viscosity index 160; a step up from standard Tellus T with an enhanced ZnDTP-based additive package for extreme-pressure (EP) performance and class-leading shear stability.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Tellus S2 MA” range; a next-generation, premium high-detergent hydraulic oil from Shell’s Tellus DO range at ISO VG 10, for use where emulsifiable fluids are preferred, using proven ashless anti-wear technology to provide reliable performance in applications with contamination by aqueous fluids.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Tellus S2 MA” range; a next-generation, premium high-detergent hydraulic oil from Shell’s Tellus DO range at ISO VG 22, for use where emulsifiable fluids are preferred, using proven ashless anti-wear technology to provide reliable performance in applications with contamination by aqueous fluids.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Tellus S2 MA” range; a next-generation, premium high-detergent hydraulic oil from Shell’s Tellus DO range at ISO VG 32, for use where emulsifiable fluids are preferred, using proven ashless anti-wear technology to provide reliable performance in applications with contamination by aqueous fluids.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Tellus S2 MA” range; a next-generation, premium high-detergent hydraulic oil from Shell’s Tellus DO range at ISO VG 46, for use where emulsifiable fluids are preferred, using proven ashless anti-wear technology to provide reliable performance in applications with contamination by aqueous fluids.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Tellus S2 MA” range; a next-generation, premium high-detergent hydraulic oil from Shell’s Tellus DO range at ISO VG 68, for use where emulsifiable fluids are preferred, using proven ashless anti-wear technology to provide reliable performance in applications with contamination by aqueous fluids.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An anti-wear hydraulic and circulating system oil at ISO VG 100 from Shell’s Tellus R range, containing a small percentage of triphenyl phosphate as part of its additive package; part of a family of Shell fluids formulated for fire resistance in hydraulic and circulating applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An anti-wear hydraulic and circulating system oil at ISO VG 22 from Shell’s Tellus R range, containing a small percentage of triphenyl phosphate as part of its additive package; part of a family of Shell fluids formulated for fire resistance in hydraulic and circulating applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An anti-wear hydraulic and circulating system oil at ISO VG 32 from Shell’s Tellus R range, containing a small percentage of triphenyl phosphate as part of its additive package; part of a family of Shell fluids formulated for fire resistance in hydraulic and circulating applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An anti-wear hydraulic and circulating system oil at ISO VG 46 from Shell’s Tellus R range, containing a small percentage of triphenyl phosphate as part of its additive package; part of a family of Shell fluids formulated for fire resistance in hydraulic and circulating applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An anti-wear hydraulic and circulating system oil at ISO VG 68 from Shell’s Tellus R range, containing a small percentage of triphenyl phosphate as part of its additive package; part of a family of Shell fluids formulated for fire resistance in hydraulic and circulating applications.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Tonna S3 M” range; a machine tool slideway oil at ISO VG 32, for the lubrication of machine tool slides, tables and feed mechanisms. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Tonna S3 M” range; a machine tool slideway oil at ISO VG 68, for the lubrication of machine tool slides, tables and feed mechanisms. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Tonna S3 M” range; a machine tool slideway oil at ISO VG 220, for the lubrication of machine tool slides, tables and feed mechanisms. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A machine tool slideway oil from Shell’s Tonna S2 M range at ISO VG 32, formulated to help protect slideways, gears, bearings and hydraulic system components; reaches the maximum failure load stage of 12 in the FZG load-carrying capacity test (a requirement by standard for ISO 68), indicating enhanced resistance to scuffing, and provides rapid separation from water-miscible cutting fluids.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A machine tool slideway oil from Shell’s Tonna S2 M range at ISO VG 46, formulated to help protect slideways, gears, bearings and hydraulic system components; reaches the maximum failure load stage of 12 in the FZG load-carrying capacity test (a requirement by standard for ISO 68), indicating enhanced resistance to scuffing, and provides rapid separation from water-miscible cutting fluids.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A machine tool slideway oil from Shell’s Tonna S2 M range at ISO VG 68, formulated to help protect slideways, gears, bearings and hydraulic system components; reaches the maximum failure load stage of 12 in the FZG load-carrying capacity test (a requirement by standard for ISO 68), indicating enhanced resistance to scuffing, and provides rapid separation from water-miscible cutting fluids.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A machine tool slideway oil from Shell’s Tonna S2 M range at ISO VG 100, formulated to help protect slideways, gears, bearings and hydraulic system components; reaches the maximum failure load stage of 12 in the FZG load-carrying capacity test (a requirement by standard for ISO 68), indicating enhanced resistance to scuffing, and provides rapid separation from water-miscible cutting fluids.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A machine tool slideway oil from Shell’s Tonna S2 M range at ISO VG 150, formulated to help protect slideways, gears, bearings and hydraulic system components; reaches the maximum failure load stage of 12 in the FZG load-carrying capacity test (a requirement by standard for ISO 68), indicating enhanced resistance to scuffing, and provides rapid separation from water-miscible cutting fluids.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A machine tool slideway oil from Shell’s Tonna S2 M range at ISO VG 220, formulated to help protect slideways, gears, bearings and hydraulic system components; reaches the maximum failure load stage of 12 in the FZG load-carrying capacity test (a requirement by standard for ISO 68), indicating enhanced resistance to scuffing, and provides rapid separation from water-miscible cutting fluids.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A machine tool slideway oil from Shell’s Tonna S2 MX range at ISO VG 32, specially designed for the lubrication of machine tool slides, tables and feed mechanisms; enhanced tackiness and stick-slip characteristics combine to offer superior frictional performance on slideways, especially recommended where high adherence is required and where high exposure to soluble cutting fluids exists.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A machine tool slideway oil from Shell’s Tonna S2 MX range at ISO VG 68, specially designed for the lubrication of machine tool slides, tables and feed mechanisms; enhanced tackiness and stick-slip characteristics combine to offer superior frictional performance on slideways, especially recommended where high adherence is required and where high exposure to soluble cutting fluids exists.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A machine tool slideway oil from Shell’s Tonna S2 MX range at ISO VG 220, specially designed for the lubrication of machine tool slides, tables and feed mechanisms; enhanced tackiness and stick-slip characteristics combine to offer superior frictional performance on slideways, especially recommended where high adherence is required and where high exposure to soluble cutting fluids exists.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium machine tool slideway oil from Shell’s Tonna S3 M range (previous name: Shell Tonna S) at ISO VG 32, specially designed for the lubrication of machine tool slides, tables and feed mechanisms; especially recommended where high precision and low-speed machines are used as well as in combined lubrication systems, and also suitable for gear and headstock lubrication.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium machine tool slideway oil from Shell’s Tonna S3 M range (previous name: Shell Tonna S) at ISO VG 68, specially designed for the lubrication of machine tool slides, tables and feed mechanisms; especially recommended where high precision and low-speed machines are used as well as in combined lubrication systems, and also suitable for gear and headstock lubrication.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium machine tool slideway oil from Shell’s Tonna S3 M range (previous name: Shell Tonna S) at ISO VG 220, specially designed for the lubrication of machine tool slides, tables and feed mechanisms; especially recommended where high precision and low-speed machines are used as well as in combined lubrication systems, and also suitable for gear and headstock lubrication.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A machine tool slideway oil with extra machining accuracy from Shell’s Tonna S4 M range at ISO VG 32, specially designed for the lubrication of machine tool slides, tables and feed mechanisms; enhanced tackiness and stick-slip characteristics combine to offer outstanding frictional performance on slideways, a tier above Tonna S3 M for applications requiring the highest levels of precision.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A machine tool slideway oil with extra machining accuracy from Shell’s Tonna S4 M range at ISO VG 68, specially designed for the lubrication of machine tool slides, tables and feed mechanisms; enhanced tackiness and stick-slip characteristics combine to offer outstanding frictional performance on slideways, a tier above Tonna S3 M for applications requiring the highest levels of precision.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A machine tool slideway oil with extra machining accuracy from Shell’s Tonna S4 M range at ISO VG 220, specially designed for the lubrication of machine tool slides, tables and feed mechanisms; enhanced tackiness and stick-slip characteristics combine to offer outstanding frictional performance on slideways, a tier above Tonna S3 M for applications requiring the highest levels of precision.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A machine tool slideway oil from Shell’s Tonna T range at ISO VG 32, developed for use on a wide range of materials used for machine tool slideway surfaces including cast iron and synthetic materials; can also be used in hydraulic and gearbox systems, although Shell Tonna S oils are generally preferable for such applications. The lower viscosity grades (32 or 68) are intended for horizontal slide lubrication, while ISO VG 220 is intended for vertical slides.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A machine tool slideway oil from Shell’s Tonna T range at ISO VG 68, developed for use on a wide range of materials used for machine tool slideway surfaces including cast iron and synthetic materials; can also be used in hydraulic and gearbox systems, although Shell Tonna S oils are generally preferable for such applications. The lower viscosity grades (32 or 68) are intended for horizontal slide lubrication, while ISO VG 220 is intended for vertical slides.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A machine tool slideway oil from Shell’s Tonna T range at ISO VG 220, developed for use on a wide range of materials used for machine tool slideway surfaces including cast iron and synthetic materials; can also be used in hydraulic and gearbox systems, although Shell Tonna S oils are generally preferable for such applications. The lower viscosity grades (32 or 68) are intended for horizontal slide lubrication, while ISO VG 220 is intended for vertical slides.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
Shell’s premium, industrial, heavy-duty gas turbine oil, the Turbo GT range, at ISO VG 32; an advanced synthetic oil that offers the highest performance in the Shell range, for heavy-duty gas turbines and turbocompressors; based on Group III base oils, with up to 50% better oxidation stability compared with the industry standard.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
Shell’s premium, industrial, heavy-duty gas turbine oil, the Turbo GT range, at ISO VG 46; an advanced synthetic oil that offers the highest performance in the Shell range, for heavy-duty gas turbines and turbocompressors; based on Group III base oils, with up to 50% better oxidation stability compared with the industry standard.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A turbine oil from Shell’s Turbo CC range at ISO VG 32, a tier offering extra protection and extra long service life for industrial turbines; part of Shell’s comprehensive Turbo turbine oil portfolio.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A turbine oil from Shell’s Turbo CC range at ISO VG 46, a tier offering extra protection and extra long service life for industrial turbines; part of Shell’s comprehensive Turbo turbine oil portfolio.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A turbine oil from Shell’s Turbo CC range at ISO VG 68, a tier offering extra protection and extra long service life for industrial turbines; part of Shell’s comprehensive Turbo turbine oil portfolio.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high quality industrial steam and gas turbine oil from Shell’s Turbo Oil T range at ISO VG 32; Shell Turbo Oils T have long been regarded as the industry standard turbine oil, formulated from high quality hydrotreated base oils and a combination of zinc-free additives that provide excellent oxidative stability, protection against rust and corrosion, low foaming and excellent demulsibility; approved by manufacturers including GE, Siemens, MAN and Solar.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high quality industrial steam and gas turbine oil from Shell’s Turbo Oil T range at ISO VG 46; Shell Turbo Oils T have long been regarded as the industry standard turbine oil, formulated from high quality hydrotreated base oils and a combination of zinc-free additives that provide excellent oxidative stability, protection against rust and corrosion, low foaming and excellent demulsibility; approved by manufacturers including GE, Siemens, MAN and Solar.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high quality industrial steam and gas turbine oil from Shell’s Turbo Oil T range at ISO VG 68; Shell Turbo Oils T have long been regarded as the industry standard turbine oil, formulated from high quality hydrotreated base oils and a combination of zinc-free additives that provide excellent oxidative stability, protection against rust and corrosion, low foaming and excellent demulsibility; approved by manufacturers including GE, Siemens, MAN and Solar.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high quality industrial steam and gas turbine oil from Shell’s Turbo Oil T range at ISO VG 100; Shell Turbo Oils T have long been regarded as the industry standard turbine oil, formulated from high quality hydrotreated base oils and a combination of zinc-free additives that provide excellent oxidative stability, protection against rust and corrosion, low foaming and excellent demulsibility; approved by manufacturers including GE, Siemens, MAN and Solar.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium industrial steam, gas and combined cycle turbine lubricant for geared turbines from Shell’s Turbo S4 GX range at ISO VG 32, based on Gas-to-Liquid (GTL) technology; developed to meet the demands of the latest high efficiency turbine systems, designed to offer outstanding, long term performance under the most severe operating conditions, and minimises wear, deposit and sludge formation even under cyclic peak loading conditions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium industrial steam, gas and combined cycle turbine lubricant for geared turbines from Shell’s Turbo S4 GX range at ISO VG 46, based on Gas-to-Liquid (GTL) technology; developed to meet the demands of the latest high efficiency turbine systems, designed to offer outstanding, long term performance under the most severe operating conditions, and minimises wear, deposit and sludge formation even under cyclic peak loading conditions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A self-extinguishing, phosphate ester based fire-resistant hydraulic fluid from Shell’s Turbo S5 DR range at ISO VG 46, developed for use in electro-hydraulic control (EHC) systems of steam and gas turbines as well as lubrication of the main bearings in steam and gas turbines, generators and cooling pumps; offers a high flash point, fire point and auto-ignition temperature to reduce potential fire hazards, good oxidation and hydrolytic stability, and rapid water separation.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced synthetic lubricant from Shell’s Corena AP range at ISO VG 68, for reciprocating compressors; based on high-quality ester fluids.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced synthetic lubricant from Shell’s Corena AP range at ISO VG 100, for reciprocating compressors; based on high-quality ester fluids.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced synthetic lubricant from Shell’s Corena AP range at ISO VG 150, for reciprocating compressors; based on high-quality ester fluids.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Corena S4 R” range; an advanced synthetic rotary air compressor oil at ISO VG 32, designed for compressors running at pressures over 25 bar and discharge temperatures in excess of 100°C with oil maintenance intervals of up to 12,000 hours. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Corena S4 R” range; an advanced synthetic rotary air compressor oil at ISO VG 46, designed for compressors running at pressures over 25 bar and discharge temperatures in excess of 100°C with oil maintenance intervals of up to 12,000 hours. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Corena S4 R” range; an advanced synthetic rotary air compressor oil at ISO VG 68, designed for compressors running at pressures over 25 bar and discharge temperatures in excess of 100°C with oil maintenance intervals of up to 12,000 hours. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Corena S2 R” range; a detergent-based rotary air compressor oil, for the reliable lubrication of rotary sliding vane and screw air compressors. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Corena S2 R” range; a detergent-based rotary air compressor oil at ISO VG 32, for the reliable lubrication of rotary sliding vane and screw air compressors operating at up to 15 bar and 100°C, with oil maintenance intervals of up to 4,000 hours. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Corena S2 R” range; a detergent-based rotary air compressor oil at ISO VG 46, for the reliable lubrication of rotary sliding vane and screw air compressors operating at up to 15 bar and 100°C, with oil maintenance intervals of up to 4,000 hours. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Corena S2 R” range; a detergent-based rotary air compressor oil at ISO VG 68, for the reliable lubrication of rotary sliding vane and screw air compressors operating at up to 15 bar and 100°C, with oil maintenance intervals of up to 4,000 hours. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Corena S2 R” range; a detergent-based rotary air compressor oil at ISO VG 100, for the reliable lubrication of rotary sliding vane and screw air compressors operating at up to 15 bar and 100°C, with oil maintenance intervals of up to 4,000 hours. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Corena S2 R” range; a detergent-based rotary air compressor oil at ISO VG 150, for the reliable lubrication of rotary sliding vane and screw air compressors operating at up to 15 bar and 100°C, with oil maintenance intervals of up to 4,000 hours. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A fully synthetic lubricant from Shell’s Corena DE range at ISO VG 100, designed for the lubrication of reciprocating compressors; formulated using high quality diester base fluids in combination with high quality additives, intended for the lubrication of both the crankcase and cylinders of reciprocating air compressors where fluids of this viscosity are recommended.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A fully synthetic lubricant from Shell’s Corena DE range at ISO VG 150, designed for the lubrication of reciprocating compressors; formulated using high quality diester base fluids in combination with high quality additives, intended for the lubrication of both the crankcase and cylinders of reciprocating air compressors where fluids of this viscosity are recommended.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A rotary screw air compressor oil from Shell’s Corena E15 range at ISO VG 46, manufactured from a special high pressure hydrotreated base oil to enhance demulsibility performance, extended drain intervals, and anti-wear properties.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A polyglycol synthetic lubricant from Shell’s Corena PGE range at ISO VG 32, for air compressors in applications that require polyalkylene glycol base fluid technology.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A polyglycol synthetic lubricant from Shell’s Corena PGE range at ISO VG 68, for air compressors in applications that require polyalkylene glycol base fluid technology.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Gas Compressor Oil S3” range; a high quality blend at ISO VG 220, designed for the total loss lubrication of cylinders of high pressure reciprocating compressors used in severe, wet and/or sour, natural gas service. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Gas Compressor Oil S3” range; a high quality blend at ISO VG 460, designed for the total loss lubrication of cylinders of high pressure reciprocating compressors used in severe, wet and/or sour, natural gas service. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Corena S2 P” range; a high quality reciprocating air compressor oil at ISO VG 68, designed to deliver lubrication performance for high pressure reciprocating compressors running at up to 220°C discharge temperatures. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Corena S2 P” range; a high quality reciprocating air compressor oil at ISO VG 100, designed to deliver lubrication performance for high pressure reciprocating compressors running at up to 220°C discharge temperatures. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Corena S2 P” range; a high quality reciprocating air compressor oil at ISO VG 150, designed to deliver lubrication performance for high pressure reciprocating compressors running at up to 220°C discharge temperatures. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Corena S3 R” range; a premium rotary air compressor lubricant at ISO VG 32, designed to deliver high performance lubrication of rotary sliding vane and screw air compressors operating at up to 20 bar and 100°C, with oil maintenance intervals of up to 6,000 hours. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Corena S3 R” range; a premium rotary air compressor lubricant at ISO VG 46, designed to deliver high performance lubrication of rotary sliding vane and screw air compressors operating at up to 20 bar and 100°C, with oil maintenance intervals of up to 6,000 hours. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Corena S3 R” range; a premium rotary air compressor lubricant at ISO VG 68, designed to deliver high performance lubrication of rotary sliding vane and screw air compressors operating at up to 20 bar and 100°C, with oil maintenance intervals of up to 6,000 hours. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Corena S3 R” range; a premium rotary air compressor lubricant at ISO VG 100, designed to deliver high performance lubrication of rotary sliding vane and screw air compressors operating at up to 20 bar and 100°C, with oil maintenance intervals of up to 6,000 hours. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The predecessor name for a product now positioned within the “Shell Corena S3 R” range; a premium rotary air compressor lubricant at ISO VG 150, designed to deliver high performance lubrication of rotary sliding vane and screw air compressors operating at up to 20 bar and 100°C, with oil maintenance intervals of up to 6,000 hours. This name is still in circulation among some distributors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high quality reciprocating air compressor oil from Shell’s Corena S2 P range at ISO VG 100, designed to deliver the lubrication performance for high pressure reciprocating compressors; suitable for most reciprocating air compressors running at up to 220°C discharge temperatures, with long oil life, outstanding wear protection and good water separation.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high quality reciprocating air compressor oil from Shell’s Corena S2 P range at ISO VG 68, designed to deliver the lubrication performance for high pressure reciprocating compressors; suitable for most reciprocating air compressors running at up to 220°C discharge temperatures, with long oil life, outstanding wear protection and good water separation.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high quality reciprocating air compressor oil from Shell’s Corena S2 P range at ISO VG 150, designed to deliver the lubrication performance for high pressure reciprocating compressors; suitable for most reciprocating air compressors running at up to 220°C discharge temperatures, with long oil life, outstanding wear protection and good water separation.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A detergent-based rotary air compressor oil from Shell’s Corena S2 R range, designed to deliver reliable lubrication of rotary sliding vane and screw air compressors operating at up to 15 bar and 100°C, with oil maintenance intervals of up to 4,000 hours; offers long life, outstanding wear protection, and maintains system efficiency through good air release and foaming prevention.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A detergent-based rotary air compressor oil from Shell’s Corena S2 R range at ISO VG 46, designed to deliver reliable lubrication of rotary sliding vane and screw air compressors operating at up to 15 bar and 100°C, with oil maintenance intervals of up to 4,000 hours.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A detergent-based rotary air compressor oil from Shell’s Corena S2 R range at ISO VG 68, designed to deliver reliable lubrication of rotary sliding vane and screw air compressors operating at up to 15 bar and 100°C, with oil maintenance intervals of up to 4,000 hours.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A high quality air compressor oil from Shell’s Corena S2 RJ range, designed to deliver reliable lubrication of rotary screw air compressors; it uses an optimised non-detergent additive system to provide good protection and performance, particularly in Japanese compressor machinery where low sludge, good thermal-oxidation stability and high flash point are required; suitable for oil-flooded or oil-injected air compressors, particularly those from Japanese manufacturers.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium quality air compressor oil from Shell’s Corena S3 R range (previous name: Shell Corena S) at ISO VG 32, designed to deliver high performance lubrication of rotary sliding vane and screw air compressors; uses an advanced additive system to provide excellent protection and performance for compressors running at up to 20 bar and 100°C, with oil maintenance intervals of up to 6,000 hours.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium quality air compressor oil from Shell’s Corena S3 R range (previous name: Shell Corena S) at ISO VG 46, designed to deliver high performance lubrication of rotary sliding vane and screw air compressors; uses an advanced additive system to provide excellent protection and performance for compressors running at up to 20 bar and 100°C, with oil maintenance intervals of up to 6,000 hours.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium quality air compressor oil from Shell’s Corena S3 R range (previous name: Shell Corena S) at ISO VG 68, designed to deliver high performance lubrication of rotary sliding vane and screw air compressors; uses an advanced additive system to provide excellent protection and performance for compressors running at up to 20 bar and 100°C, with oil maintenance intervals of up to 6,000 hours.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium quality air compressor oil from Shell’s Corena S3 RJ range, a variant of the S3 R tier specifically optimised for compatibility with Japanese-built screw compressor machinery; suitable for oil-flooded or oil-injected screw compressors from Japanese manufacturers.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium quality synthesized air compressor oil from Shell’s Corena S3 RX range at ISO VG 46, based on Shell’s advanced Gas-to-Liquids (GTL) base oil technology combined with an advanced performance additive system; designed to provide excellent protection and performance for compressors running with oil change intervals of 6,000 hours and up to 8,000 hours under certain conditions; exceptional air release and low foaming tendency, along with excellent water separation.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A premium quality synthesized air compressor oil from Shell’s Corena S3 RX range at ISO VG 68, based on Shell’s advanced Gas-to-Liquids (GTL) base oil technology combined with an advanced performance additive system; designed to provide excellent protection and performance for compressors running with oil change intervals of 6,000 hours and up to 8,000 hours under certain conditions; exceptional air release and low foaming tendency, along with excellent water separation.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced synthetic lubricant from Shell’s Corena S4 P range at ISO VG 68, offering extra long life and improved efficiency for severe reciprocating compressor applications; its advanced additive system provides outstanding protection and stable performance for high-pressure piston air compressors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced synthetic lubricant from Shell’s Corena S4 P range at ISO VG 100, offering extra long life and improved efficiency for severe reciprocating compressor applications; its advanced additive system provides outstanding protection and stable performance for high-pressure piston air compressors.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced synthetic rotary air compressor oil from Shell’s Corena S4 R range at ISO VG 32, designed to provide the highest performance lubrication for compressors operating at pressures over 25 bar and temperatures over 100°C; uses an advanced additive system to deliver exceptional wear protection, thermal and chemical stability, and oil life up to 12,000 hours; suitable for rotary vane and screw compressors, including those operating under severe conditions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced synthetic rotary air compressor oil from Shell’s Corena S4 R range at ISO VG 46, designed to provide the highest performance lubrication for compressors operating at pressures over 25 bar and temperatures over 100°C; uses an advanced additive system to deliver exceptional wear protection, thermal and chemical stability, and oil life up to 12,000 hours; suitable for rotary vane and screw compressors, including those operating under severe conditions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
An advanced synthetic rotary air compressor oil from Shell’s Corena S4 R range at ISO VG 68, designed to provide the highest performance lubrication for compressors operating at pressures over 25 bar and temperatures over 100°C; uses an advanced additive system to deliver exceptional wear protection, thermal and chemical stability, and oil life up to 12,000 hours; suitable for rotary vane and screw compressors, including those operating under severe conditions.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A top tier synthetic lubricant based on polyalkylene glycol (PAG) and ester technology from Shell’s Corena S5 R range at ISO VG 32, designed for use in rotary screw air compressors; enables long oil drain intervals of up to 10,000 hours with varnish-free operation; rapid air release and low foaming properties, and good thermal conductivity making it an effective coolant.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A top tier synthetic lubricant based on polyalkylene glycol (PAG) and ester technology from Shell’s Corena S5 R range at ISO VG 46, designed for use in rotary screw air compressors; enables long oil drain intervals of up to 10,000 hours with varnish-free operation; rapid air release and low foaming properties, and good thermal conductivity making it an effective coolant.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
A top tier synthetic lubricant based on polyalkylene glycol (PAG) and ester technology from Shell’s Corena S5 R range at ISO VG 68, designed for use in rotary screw air compressors; enables long oil drain intervals of up to 10,000 hours with varnish-free operation; rapid air release and low foaming properties, and good thermal conductivity making it an effective coolant.
KARALUB is not a Shell distributor or representative. The product name and category are based on Shell's publicly published information; for exact, current technical specifications, refer to Shell's official documentation.
The Important Part
The items above are the closest equivalents by product category and viscosity grade, not a claim of exact spec parity. Contact our technical team for a precise comparison.
Product Families
Industries Served
Technical Resources
Coming soon
Coming soon
Keep Reading
FAQ
Send us your equipment specifications and current product, and our technical team will suggest the most precise KARALUB equivalent.
This assistant draws on KARALUB's own site data and may refer complex questions to our technical team.