Oil
ISO VG 68
Castrol Aircol SN 68
Line: Aircol
A high quality air compressor lubricant from Castrol’s Aircol SN range at ISO VG 68, formulated using high quality synthetic diesters; designed to cope with the severe operating conditions experienced in rotary screw, rotary vane and reciprocating air compressors operating at high compression ratios and high discharge temperatures (up to 220°C); in reciprocating units, offers up to eight times the service life of mineral oils; a high spontaneous ignition temperature provides greater safety by reducing the possibility of downstream fires and explosions.
Oil
ISO VG 100
Castrol Aircol SN 100
Line: Aircol
A high quality air compressor lubricant from Castrol’s Aircol SN range at ISO VG 100, formulated using high quality synthetic diesters; designed to cope with the severe operating conditions experienced in rotary screw, rotary vane and reciprocating air compressors operating at high compression ratios and high discharge temperatures; offers reduced carbon forming tendencies and extended oil life when compared to mineral oils due to much higher oxidation resistance.
Oil
ISO VG 32
Castrol Aircol SR 32
Line: Aircol
A premium synthetic air compressor lubricant from Castrol’s Aircol SR range at ISO VG 32, based on polyalphaolefin (PAO) fluids and designed for use in rotary screw compressors; increased oil service life of typically up to 8,000 hours in most systems; ester-free formulation eliminates the formation of corrosive acids; excellent water separation characteristics.
Oil
ISO VG 46
Castrol Aircol SR 46
Line: Aircol
A premium synthetic air compressor lubricant from Castrol’s Aircol SR range at ISO VG 46, based on polyalphaolefin (PAO) fluids; good compatibility with nitrile, silicone, polyurethane and fluoropolymer seal materials typically used in compressor units; compatible with mineral oil based lubricants, allowing changeover to Aircol SR without compatibility issues.
Oil
ISO VG 68
Castrol Aircol SR 68
Line: Aircol
A premium synthetic air compressor lubricant from Castrol’s Aircol SR range at ISO VG 68, based on polyalphaolefin (PAO) fluids; suitable for use in oil flooded rotary screw compressors operating under extreme climatic conditions, harsh environments and severe operating conditions where very high air discharge temperatures (>100°C) are experienced.
Oil
ISO VG 68
Castrol Alpha SP 68
Line: Alpha
An extreme-pressure mineral gear oil from Castrol’s Alpha SP range at ISO VG 68, based on highly refined mineral oil fortified with sulphur-phosphorus compounds for anti-wear and extreme-pressure characteristics; recommended for use in industrial gearboxes with forced circulation or splash and oil bath lubrication; lead-free additives avoid heavy metal contamination in the workplace and environment.
Oil
ISO VG 100
Castrol Alpha SP 100
Line: Alpha
A high quality extreme-pressure mineral gear oil from Castrol’s Alpha SP range at ISO VG 100; long oil life due to excellent thermal stability and oxidation resistance; good water tolerance and demulsification characteristics; rust and copper corrosion protection of metal surfaces; fully approved by David Brown Gear Industries Limited.
Oil
ISO VG 150
Castrol Alpha SP 150
Line: Alpha
A high quality extreme-pressure mineral gear oil from Castrol’s Alpha SP range at ISO VG 150, formulated from highly refined mineral oil fortified with sulphur-phosphorus compounds; suitable for heavily loaded industrial gearboxes; fully approved by David Brown Gear Industries Limited.
Oil
ISO VG 220
Castrol Alpha SP 220
Line: Alpha
A high quality extreme-pressure mineral gear oil from Castrol’s Alpha SP range at ISO VG 220, the most commonly specified grade in this range for industrial gearboxes; passes the FZG gear test at a high failure load stage; fully approved by David Brown Gear Industries Limited.
Oil
ISO VG 320
Castrol Alpha SP 320
Line: Alpha
A high quality extreme-pressure mineral gear oil from Castrol’s Alpha SP range at ISO VG 320; designed for heavily loaded industrial gearboxes and provides high load-carrying capacity per the Brugger test; fully approved by David Brown Gear Industries Limited.
Oil
ISO VG 460
Castrol Alpha SP 460
Line: Alpha
A high quality extreme-pressure mineral gear oil from Castrol’s Alpha SP range at ISO VG 460; designed for heavy-duty industrial gearboxes with slow-moving gears; fully approved by David Brown Gear Industries Limited.
Oil
ISO VG 680
Castrol Alpha SP 680
Line: Alpha
A high quality extreme-pressure mineral gear oil from Castrol’s Alpha SP range at ISO VG 680, the heaviest standard grade in this range; designed for very heavily loaded, slow-moving industrial gearboxes; fully approved by David Brown Gear Industries Limited.
Oil
ISO VG 150
Castrol Alphasyn EP 150
Line: Alphasyn
A high quality synthetic gear oil from Castrol’s Alphasyn EP range at ISO VG 150, based on poly-alphaolefin (PAO) fluids and sulphur/phosphorus extreme pressure (EP) additive technology; formulated for use in all types of enclosed gears including heavy and shock-loaded gears and bearings where EP properties are required; suitable for gearboxes where micro-pitting resistance is required and for applications in extreme environments such as mining, marine and paper production.
Oil
ISO VG 220
Castrol Alphasyn EP 220
Line: Alphasyn
A high quality synthetic gear oil from Castrol’s Alphasyn EP range at ISO VG 220, based on poly-alphaolefin (PAO) fluids and sulphur/phosphorus extreme pressure (EP) additive technology; full EP performance gives maximum protection of gears against wear and shock loading, including protection against micro-pitting; fully compatible with nitrile, silicone and fluoropolymer seal materials.
Oil
ISO VG 320
Castrol Alphasyn EP 320
Line: Alphasyn
A high quality synthetic gear oil from Castrol’s Alphasyn EP range at ISO VG 320, based on poly-alphaolefin (PAO) fluids and sulphur/phosphorus extreme pressure (EP) additive technology; designed for heavily loaded industrial gearboxes and harsh environmental conditions.
Oil
ISO VG 460
Castrol Alphasyn EP 460
Line: Alphasyn
A high quality synthetic gear oil from Castrol’s Alphasyn EP range at ISO VG 460, based on poly-alphaolefin (PAO) fluids; designed for very heavily loaded industrial gearboxes with slow-moving gears requiring extreme-pressure properties.
Oil
ISO VG 220
Castrol Alphasyn PG 220
Line: Alphasyn
A synthetic heavy duty (PAG) gear oil from Castrol’s Alphasyn PG range at ISO VG 220, primarily intended for use in worm reduction gearboxes where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures; inherently high viscosity index and low pour point make it suitable for use over a wide temperature range.
Oil
SAE 80W-90
Castrol Axle EPX 80W-90
Line: Axle
A multigrade axle oil from Castrol’s Axle EPX range at SAE 80W-90, fortified to meet the requirements of API GL-5; its primary use is for hypoid gears featured in automotive differentials but is often specified in highly loaded spiral bevel or planetary gearboxes on offshore installations and onshore drilling sites; good thermal/oxidation stability eliminating deposit formation that thickens oil; superior low temperature fluidity providing smoother operation in cold start conditions.
Oil
BN 40
Castrol Cyltech 40SX
Line: Cyltech
A premium marine diesel engine cylinder lubricant from Castrol’s Cyltech 40SX range at BN 40, high detergent, for two-stroke marine engines; suitable for prolonged operation on low-sulphur fuel; excellent control of piston ring and cylinder liner wear; balanced detergency performance for engine cleanliness; meets the requirements of MAN Diesel & Turbo, WinGD (Wärtsilä) and MHI (Mitsubishi) for operation on low sulphur fuel.
Oil
BN 70
Castrol Cyltech 70
Line: Cyltech
A marine diesel engine cylinder lubricant from Castrol’s Cyltech 70 range at BN 70, suitable for the cylinder lubrication of low speed crosshead engines burning residual fuels; can be used with a wide range of fuels with sulphur content typically between 1.0 and 3.5%; has full No Objection status with all principal manufacturers of crosshead engines.
Oil
BN 100
Castrol Cyltech 100
Line: Cyltech
A premium marine diesel engine cylinder lubricant from Castrol’s Cyltech 100 range at BN 100, specifically developed to provide protection against corrosive wear; the high BN is achieved by a careful balance of detergents that optimise cleanliness performance; suitable for the cylinder lubrication of the latest super long stroke crosshead engines burning residual fuels, and in particular whilst slow steaming and using medium and high sulphur fuels.
Oil
BN 140
Castrol Cyltech 140
Line: Cyltech
A premium marine diesel engine cylinder lubricant from Castrol’s Cyltech 140 range at BN 140, the highest grade in the Cyltech range, specifically developed to provide protection against corrosive wear; suitable for low speed crosshead engines burning high sulphur residual fuels that require the highest level of corrosion protection.
Oil
Low-BN
Castrol Cyltech ACT
Line: Cyltech
A marine diesel engine cylinder lubricant from Castrol’s Cyltech ACT range, specifically recommended for medium to long term use with ultra-low-sulphur fuels (below 0.1%), where Cyltech 40SX may be suitable for short-term use but does not offer optimal long-term protection; reduced deposits, especially calcium carbonate which may result from the use of higher BN oils combined with low-sulphur fuel.
Oil
ISO VG 15
Castrol Hyspin AWH-M 15
Line: Hyspin
A high viscosity index, anti-wear hydraulic oil from Castrol’s Hyspin AWH-M range at ISO VG 15, based on highly refined mineral oil and a stabilised zinc additive system; contains a shear stable additive system which helps maintain the viscosity characteristics of the product over a wide temperature range and imparts a very low pour point which enables the product to be used in very cold environments.
Oil
ISO VG 32
Castrol Hyspin AWH-M 32
Line: Hyspin
A high viscosity index, anti-wear hydraulic oil from Castrol’s Hyspin AWH-M range at ISO VG 32; excellent anti-wear performance provides extended wear protection for hydraulic pumps; reduced down time due to unscheduled maintenance and savings from replacement part costs; excellent water separation and hydrolytic stability.
Oil
ISO VG 46
Castrol Hyspin AWH-M 46
Line: Hyspin
A high viscosity index, anti-wear hydraulic oil from Castrol’s Hyspin AWH-M range at ISO VG 46; fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers; high viscosity index and low pour point enables the product to be used over a wide temperature range.
Oil
ISO VG 68
Castrol Hyspin AWH-M 68
Line: Hyspin
A high viscosity index (145) anti-wear hydraulic oil from Castrol’s Hyspin AWH-M range at ISO VG 68, ideal for outdoor hydraulic systems and precision machine tools; suitable for outdoor equipment operating in wide temperature ranges including off-highway machinery and marine applications; also suitable for indoor manufacturing equipment with control systems requiring minimal viscosity change with temperature.
Oil
ISO VG 100
Castrol Hyspin AWH-M 100
Line: Hyspin
A high viscosity index, anti-wear hydraulic oil from Castrol’s Hyspin AWH-M range at ISO VG 100; suitable for outdoor equipment likely to operate in wide temperature ranges, such as machinery subjected to cold start up conditions and high temperature continuous running, including off-highway and marine applications.
Oil
ISO VG 22
Castrol Hyspin AWS 22
Line: Hyspin
An anti-wear hydraulic oil from Castrol’s Hyspin AWS range at ISO VG 22, based upon highly refined mineral oil enhanced with a stabilised zinc additive system; designed for use in industrial hydraulic systems which require anti-wear protection, such as lightly loaded gears, variable speed units and bearings; good thermal and oxidative stability leads to longer operating life and reduction in lubricant costs.
Oil
ISO VG 32
Castrol Hyspin AWS 32
Line: Hyspin
An anti-wear hydraulic oil from Castrol’s Hyspin AWS range at ISO VG 32, based upon highly refined mineral oil enhanced with a stabilised zinc additive system; designed for use in industrial hydraulic systems which require anti-wear protection, such as lightly loaded gears, variable speed units and bearings; good thermal and oxidative stability leads to longer operating life and reduction in lubricant costs.
Oil
ISO VG 46
Castrol Hyspin AWS 46
Line: Hyspin
An anti-wear hydraulic oil from Castrol’s Hyspin AWS range at ISO VG 46, based upon highly refined mineral oil enhanced with a stabilised zinc additive system; designed for use in industrial hydraulic systems which require anti-wear protection, such as lightly loaded gears, variable speed units and bearings; good thermal and oxidative stability leads to longer operating life and reduction in lubricant costs.
Oil
ISO VG 68
Castrol Hyspin AWS 68
Line: Hyspin
An anti-wear hydraulic oil from Castrol’s Hyspin AWS range at ISO VG 68, based upon highly refined mineral oil enhanced with a stabilised zinc additive system; designed for use in industrial hydraulic systems which require anti-wear protection, such as lightly loaded gears, variable speed units and bearings; good thermal and oxidative stability leads to longer operating life and reduction in lubricant costs.
Oil
ISO VG 100
Castrol Hyspin AWS 100
Line: Hyspin
An anti-wear hydraulic oil from Castrol’s Hyspin AWS range at ISO VG 100, based upon highly refined mineral oil enhanced with a stabilised zinc additive system; designed for use in industrial hydraulic systems which require anti-wear protection, such as lightly loaded gears, variable speed units and bearings; good thermal and oxidative stability leads to longer operating life and reduction in lubricant costs.
Oil
ISO VG 150
Castrol Hyspin AWS 150
Line: Hyspin
An anti-wear hydraulic oil from Castrol’s Hyspin AWS range at ISO VG 150, based upon highly refined mineral oil enhanced with a stabilised zinc additive system; designed for use in industrial hydraulic systems which require anti-wear protection, such as lightly loaded gears, variable speed units and bearings; good thermal and oxidative stability leads to longer operating life and reduction in lubricant costs.
Oil
ISO VG 22
Castrol Hyspin ZZ 22
Line: Hyspin
A premium hydraulic oil from Castrol’s Hyspin ZZ range at ISO VG 22, based on a carefully selected ashless (zinc free) additive system designed to meet and exceed the most exacting performance standards; particularly suitable for hydraulic systems using vane and piston pumps where elevated operating temperatures are encountered; proven to be resistant to the effects of ‘dieseling’ in highly stressed systems such as plastic injection moulding and fatigue testing equipment.
Oil
ISO VG 32
Castrol Hyspin ZZ 32
Line: Hyspin
A premium hydraulic oil from Castrol’s Hyspin ZZ range at ISO VG 32, based on a carefully selected ashless (zinc free) additive system designed to meet and exceed the most exacting performance standards; particularly suitable for hydraulic systems using vane and piston pumps where elevated operating temperatures are encountered; proven to be resistant to the effects of ‘dieseling’ in highly stressed systems such as plastic injection moulding and fatigue testing equipment.
Oil
ISO VG 46
Castrol Hyspin ZZ 46
Line: Hyspin
A premium hydraulic oil from Castrol’s Hyspin ZZ range at ISO VG 46, based on a carefully selected ashless (zinc free) additive system designed to meet and exceed the most exacting performance standards; particularly suitable for hydraulic systems using vane and piston pumps where elevated operating temperatures are encountered; proven to be resistant to the effects of ‘dieseling’ in highly stressed systems such as plastic injection moulding and fatigue testing equipment.
Oil
ISO VG 68
Castrol Hyspin ZZ 68
Line: Hyspin
A premium hydraulic oil from Castrol’s Hyspin ZZ range at ISO VG 68, based on a carefully selected ashless (zinc free) additive system designed to meet and exceed the most exacting performance standards; particularly suitable for hydraulic systems using vane and piston pumps where elevated operating temperatures are encountered; proven to be resistant to the effects of ‘dieseling’ in highly stressed systems such as plastic injection moulding and fatigue testing equipment.
Oil
ISO VG 100
Castrol Hyspin ZZ 100
Line: Hyspin
A premium hydraulic oil from Castrol’s Hyspin ZZ range at ISO VG 100, based on a carefully selected ashless (zinc free) additive system designed to meet and exceed the most exacting performance standards; particularly suitable for hydraulic systems using vane and piston pumps where elevated operating temperatures are encountered; proven to be resistant to the effects of ‘dieseling’ in highly stressed systems such as plastic injection moulding and fatigue testing equipment.
Oil
API CF
Castrol MHP 153
Line: MHP
A high-performance marine diesel engine oil from Castrol’s MHP range, specifically developed for use in modern highly rated marine and power generation four-stroke engines operating on distillate fuels; suitable for use in medium to highly-rated marine trunk piston engines operating with ISO 8217 type DMA/DMZ/DMB/RMA10 fuels and requiring API CF performance; high load carrying capabilities and superior gear performance that enable it to be used as a common oil for both engine and transmission systems.
Oil
API CF
Castrol MHP 154
Line: MHP
A high-performance marine diesel engine oil from Castrol’s MHP range, specifically developed for use in modern highly rated marine and power generation four-stroke engines operating on distillate fuels; suitable for use in medium to highly-rated marine trunk piston engines operating with ISO 8217 type DMA/DMZ/DMB/RMA10 fuels and requiring API CF performance; high load carrying capabilities and superior gear performance that enable it to be used as a common oil for both engine and transmission systems.
Oil
ISO VG 32
Castrol Magna SW 32
Line: Magna
A circulating oil from Castrol’s Magna SW range at ISO VG 32, part of Castrol’s official industrial portfolio; designed for industrial circulating lubrication applications requiring good oxidation stability and corrosion protection.
Oil
ISO VG 68
Castrol Magna SW 68
Line: Magna
A circulating oil from Castrol’s Magna SW range at ISO VG 68, part of Castrol’s official industrial portfolio; designed for industrial circulating lubrication applications requiring good oxidation stability and corrosion protection.
Oil
ISO VG 220
Castrol Magna SW 220
Line: Magna
A circulating oil from Castrol’s Magna SW range at ISO VG 220, part of Castrol’s official industrial portfolio; designed for industrial circulating lubrication applications requiring good oxidation stability and corrosion protection.
Oil
ISO VG 32
Castrol Perfecto AWT 32
Line: Perfecto
A turbine oil from Castrol’s Perfecto AWT range at ISO VG 32, designed to meet the lubrication requirements of steam, gas and water turbines; blended from selectively refined mineral oil basestocks and incorporating additives which inhibit oxidation and sludge formation and control any tendency towards foaming; contains a non-zinc anti-wear system.
Oil
ISO VG 46
Castrol Perfecto AWT 46
Line: Perfecto
A turbine oil from Castrol’s Perfecto AWT range at ISO VG 46, designed to meet the lubrication requirements of steam, gas and water turbines; blended from selectively refined mineral oil basestocks and incorporating additives which inhibit oxidation and sludge formation and control any tendency towards foaming; contains a non-zinc anti-wear system.
Oil
ISO VG 32
Castrol Perfecto T 32
Line: Perfecto
A turbine oil from Castrol’s Perfecto T range (current name: Perfecto X) at ISO VG 32, formulated from highly refined mineral base stocks together with rust and oxidation additives to extend their inherent oxidation stability and corrosion protection; primarily intended for the lubrication of steam turbines because of its resistance to foaming, demulsification performance and its air release properties; can also be used in lightly loaded industrial gas turbines.
Oil
ISO VG 46
Castrol Perfecto T 46
Line: Perfecto
A turbine oil from Castrol’s Perfecto T range (current name: Perfecto X) at ISO VG 46, formulated from highly refined mineral base stocks together with rust and oxidation additives to extend their inherent oxidation stability and corrosion protection; primarily intended for the lubrication of steam turbines because of its resistance to foaming, demulsification performance and its air release properties; can also be used in lightly loaded industrial gas turbines.
Oil
ISO VG 68
Castrol Perfecto T 68
Line: Perfecto
A turbine oil from Castrol’s Perfecto T range (current name: Perfecto X) at ISO VG 68, formulated from highly refined mineral base stocks together with rust and oxidation additives to extend their inherent oxidation stability and corrosion protection; primarily intended for the lubrication of steam turbines because of its resistance to foaming, demulsification performance and its air release properties; can also be used in lightly loaded industrial gas turbines.
Oil
ISO VG 100
Castrol Perfecto T 100
Line: Perfecto
A turbine oil from Castrol’s Perfecto T range (current name: Perfecto X) at ISO VG 100, formulated from highly refined mineral base stocks together with rust and oxidation additives to extend their inherent oxidation stability and corrosion protection; primarily intended for the lubrication of steam turbines because of its resistance to foaming, demulsification performance and its air release properties; can also be used in lightly loaded industrial gas turbines.
Grease
NLGI 2
Castrol Spheerol LMM
Line: Spheerol
A multi-purpose lithium grease from Castrol’s Spheerol LMM range containing molybdenum disulphide solid lubricant to enhance its load carrying properties under conditions of high or shock loading or to prevent scuffing or fretting; contains oxidation and corrosion inhibitors, anti-wear additives, has good mechanical stability and can be used in the presence of moisture; suitable for plain and rolling element bearings, pivot pins, cams, screws, splined shafts, slides and flexible joints; not recommended for rolling element bearings such as wheel bearings.
Grease
NLGI 2
Castrol Spheerol SX 2
Line: Spheerol
A calcium complex sulfonate multi-purpose grease from Castrol’s Spheerol SX range at NLGI 2, specifically developed to provide enhanced lubrication and protection for bearings, wire ropes and open gears found usually in offshore environments; provides superior performance benefits in the highly aggressive conditions experienced in the marine environment: resistant to both fresh and salt water, providing a high level of corrosion protection; suitable for most journal bearings, wire ropes and open gears used in marine deck equipment as well as roller, ball and needle bearings generally used in engine room equipment.
